OPERATION MANUAL
CONQUEST AUTOMATIC
© Copyright 2007 CHASE-DURER LTD all rights reserved.
Table of Contents
Setting Crown and Display / Hands
®
® Winding /
® Setting Date
® Specifications
Setting Local TIME
1
2
3
4
Setting Crown and Display / Hands
1.
Second hand
1
Winding and Setting Positions
Setting Crown Positions
1 Winding position.
2 Date
3 Stops second hand, setting minute and hour hands position.
2
adjustment position.
3
12
CHASE-DURER
COSC
Chronometer
Officially Certified
12
WATCH HANDS
Minute hand
Setting
Crown
48
Hour hand
Date Window
Winding / Setting Local TIME
NOTE: If your watch stops, it must be wound by turning the crown clockwise approximately 25 full
turns. Although the watch is automatic, the mainspring may not have enough reserve to keep it running
accurately. Once wound, the normal movement of wearing the watch will provide enough power to
keep accurate time.
Position 1
of setting crown is for
normal operation and also
used for winding
Setting crown in position 3 is
used to adjust both hour and
minute hands*
2.
12
CHASE-DURER
COSC
Chronometer
Officially Certified
Note - When setting the time, pay attention to the Date window to make sure you are setting the
time correctly for AM or PM. The Date begins changing at 11:30PM (23:30 hours).
48
12
1
2
3
*Setting crown in position 3 Stops
the Second Hand to allow
synchronizing with a time signal.
Date changes each time
hour hand passes midnight
(24:00 hours)
Setting Date
Date changes each time the hour hand passes midnight (24:00 hours)
3.
12
CHASE-DURER
COSC
Chronometer
Officially Certified
12
1
3
2
48
Turn crown forward in
position 2 to set the Date
Specifications
CONQUEST AUTOMATIC CHRONOMETER
Technical Specifications
®
SWISS Made, 26-jewel precision SW 200 automatic movement.
® COSC Certified Chronometer.
® Display window for date.
® Super-LumiNova advanced illumination system on hands.
Solid 316L stainless steel and titanium case with 10 micron 18K gold.
®
® Rubber bracelet with solid engraved 316 stainless steel inserts
and specially designed deployment buckle.
crew-in exhibition back
® S .
® Water resistant to 330m/1000 feet.
S
® cratch-resistant sapphire crystal with screw-in titanium bezel.
iameter -
® D 48mm.
® Serial numbered.
® 2 year limited international warranty.
4.
SW Cal. 200
(CONQUEST AUTOMATIC)
CHASE-DURER
9601 Wilshire Blvd. #1118
Beverly Hills, CA 90210 USA
Tel: 800.544.4365 / 310.550.7280
Fax: 310.550.0830
E-mail: Customer-Service@Chase-Durer.com
www.chase-durer.com
© Copyright 2007 CHASE-DURER LTD all rights reserved.
Loading...