Champion Pumps CP8NC Catalog
CP8NC
DISCHARGE 8” 125 lb., Flange Horizontal
LIQUID TEMPERATURE 104°F Continuous
MOTOR HOUSING Cast Iron, Class 30
VOLUTE Cast Iron, Class 30 with Bronze
wear ring
3 vane, enclosed type with
IMPELLER
SOLIDS HANDLING 3” spherical
SHAFT Stainless steel
SEAL PLATE Cast Iron, Class 30
PAINT Air dry enamel
SQUARE RINGS Buna-N
HARDWARE Stainless steel
SEAL
UPPER BEARING Single row, ball, oil lubricated
LOWER BEARING Double row, ball, oil lubricated
POWER CORD
MOTOR Class F Insulation, Oil Filled
THREE PHASE
MOISTURE SENSOR
TEMPERATURE
SENSOR
pump out vanes on back side,
Dynamically balanced, ISO
G6.3, Cast Iron, Class 30
Double mechanical, Oil Filled
pressure equalized reservoir,
inner seal Carbon/Ceramic/Buna-N
outer seal Silicon Carbide/Buna-N
25 Ft. Cord. Epoxy sealed
housing with secondary
Pressure grommet for sealing
and strain relief.
230/460 Volt. Dual Voltage.
Requires overload protection
to be included in control panel
Normally open (N/O),
requires relay in control panel
Normally closed (N/C),
requires relay in control panel
36, 48HP
Submersible Non-Clog
www.championpump.com
CP8NC36036,
CP8NC36046,
CP8NC48046
1150RPM, 60Hz
Description
Submersible non-clog sewage pump designed for typical
raw sewage applications.
Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100
CP8NC
36, 48HP
Submersible Non-Clog
www.championpump.com
NEMA
MODEL HP Hz Volts/Ph RPM
CP8NC36036 36 60 230/3 1150 E 90.0 434.0 2/3-3G G 1.34
CP8NC36046 36 60 460/3 1150 E 45.0 217.0 2/3-3G G 1.34
CP8NC48046 48 60 460/3 1150 E 65.0 290.0 2/3-3G G 1.34
Winding resistance ± 5% at terminal block. Rated operation at ± 10% voltage at motor.
Moisture and Temperature sensor cable for all models is 18/5 SOW, 0.476” O.D. ± .02”
Champion Pump Company, Inc • P.O. Box 528 • Ashland, OH 44805
Phone 419-281-4500 • toll free 800-659-4491 • fax 419-616-1100
START
CODE
FULL
LOAD
AMPS
LOCKED
ROTOR
AMPS
CORD SIZE
CORD
TYPE
CORD
O.D.
Loading...