Champion RW-72 User Manual

Page 1
Project Item No. Quantity
MODEL RW-72 WASHER
STANDARD FEATURES
• Heavy-duty stainless steel construction
• Double-skinned hinged door design
• Standard and custom wash racks
• Choice of tank heat: electric, infrared gas or steam
• Moisture resistant control gauges
• Easy to clean, dual filtration system
• Recirculating wash water
• Two (2) 15 Hp pumps
• Adjustable wash and rinse cycles
• Digital Control & Information Center
• 72 sheet pan capacity
• Fresh water sanitizing rinse
• Designed for pit or ramp installations
• Precision engineered spray arm assembly
• One year parts and labor warranty
MODEL RW-72
Cart, Cabinet, Rack
and Pan Washer
(Shown with optional
fold-away ramp)
OPTIONS
Additional Panwasher and Rackwasher Models:
M RW-36 M RW-54 M RW-66
Photo is for general visual representation only. Please refer to specifications for the latest detailed product information.
Champion Industries, Inc.
3765 Champion Blvd., Winston-Salem, NC 27105
Tel: 336/661-1556 Fax: 336/661-1979
Jordan Station, Ontario, Canada L0R 1S0
Tel: 800/263-5798 Fax: 905/562-4618
www.championindustries.com
(pdf) 8/16
DG015
Champion, an Ali Group brand
Page 2
MODEL RW-72
102"
98"
124"
Wa
Rotating
Washer Arm
Assemblies
Rinse Pump 12" Diameter
Vent
Cart, Cabinet, Rack and Pan Washer
Hot Water
Connection Rinse Tank
Electrical
Control Panel
Wash Thermometer
sh Pressure Gauge
Rinse Thermometer
MODEL RW-72 WASHER
Digital Control and Information Center
Wash Pumps
Wash Down Hose with Spray Nozzle
Overflow Connection
Drain Valve
Rotating
Wash Arm
Assemblies
38"
Door
Opening
74-1/2"
76"
Rinse Pump 12" Diameter
Vent
84"
Door
Opening
87-1/2"
103-1/2"
16"
Dimensions shown in inches
SPECIFICATIONS
Door
Double skinned stainless steel with exterior latch and inside
release handle.
Filter
Stainless steel, perforated, screen type.
Water Pump
Two (2) 15 Hp, 208/240/480 volt, 3 phase, 60 cycle with
output of 250 gallons per minute at 35 to 45 P.S.I. each.
Digital Control & Information Center
110 volt control circuit with push pad operation of “Power
On”, “Stop” and “Short, Medium or Long Wash Cycles”. A digital display indicates “Time Remaining” for each cycle. LED’s indicate wash, rinse and unload functions. A buzzer is also included to provide an audible indication of time to unload. A pre-programmed circuit board allows the push pad to be used as a “Diagnostic Center” by displaying “Error Codes” for ease of troubleshooting.
Gauges
Special moisture resistant gauges measure wash temperature,
rinse temperature and wash pressure.
Wash Tank
Stainless steel with electric, gas or steam heating,
thermostatically controlled, low water protected, sloped to drain with a 250 gallon capacity.
Pumped Rinse Tank
Stainless steel with electric, gas or steam heating to provide
180ºF/190ºF hot sanitizing rinse.
Racks
Constructed of stainless steel. Built to match specific washing
requirements.
90"
94"
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 800/263-5798 • Fax: 905/562-4618
Page 3
SPECIFICATIONS
MODEL RW-72 CART, CABINET,
RACK AND PAN WASHER
Cabinet
Door
MODEL RW-72 WASHER
Washer Floor
Recirculating Wash Tank
Wash Tank Filter
Wash Tank Fill Valve
Drain Valve
Wash Pump
Rotating Wash Hub & Spray Arm Assembly
Sanitizing Pumped Rinse Tank
Final Rinse Piping
Control & Information Center
Optional Rinse Hose
Steam Exhaust Vent
74-1/2" wide x 98" deep x 103-1/2" high. Clearance height 124". Standard door opening: 38" wide x 84" high. Wash chamber: 38" wide x 80" deep x 84" high. constructed of 12, 14 & 16 gauge, stainless steel. All seams tigwelded, cleaned and polished. Note: for pass-thru operation cabinet length is 108".
Standard right hand or optional left hand swing constructed of 14 and 16 gauge, stainless steel with integral stainless steel framework. Door double skinned for added strength. Equipped with door latch and inside release handle. Door is interlocked with limit switch to prevent machine operation while open.
Floor constructed of 12 gauge stainless steel formed sheets designed to provide maximum strength. Floor supports constructed of 3" x 3" x 1/4" stainless steel angle.
Heated by 208/240 at 480 Volt electric immersion heaters, 42 kW total, thermostatically controlled wash temperature with low water protection system. 250 gallon capacity. 14 gauge stainless steel, sloped to drain. Gas and steam heating options available.
Perforated, stainless steel screen type designed for increased effectiveness and easy cleaning without emptying wash tank.
Size 1" brass material, solenoid type, automatic.
Size 2" brass material, gate type for manual or electrically operated ball valve for an automatic option.
Two (2) 15 Hp, 208/240 or 480 volt, 3 phase, 60 cycle. Close coupled; Each pump delivers 250 gallons per minute at 35 to 45 psi, mounted on 12 gauge stainless steelformed channel base.
Water-driven stainless steel spray arm assembly with stainless steel jets,removable end caps and hand-operated, quick-release mechanism for easy cleaning and reassembly. Mounted on stainless steel base.
Stainless steel, 60 gallon capacity, with 208/240 or 480 Volt electric booster heaters, pumped rinse 42 kW total, to provide 180°/190° F hot sanitizing rinse. 1-1/2 Hp pump to provide 24 gallons per 30-second cycle. Gas and steam coil heating options available.
Stainless steel tubing with brass compression ttings and brass or optional stainless steel full cone rinse jets.
120 volt control circuit with push pad operation of “Power On,” “Stop” and Information “Short, Medium or Long Wash Cycles.” A digital display indicates “Time Remaining” for each cycle. LED’s in­dicate wash, rinse and unload functions. A buzzer is also included to provide an audible indication when the machine is ready to unload. A pre-programmed circuit board allows the push pad to be used as a “Diagnostic Center” by displaying “Error Codes” for ease of troubleshooting. Moisture resistant gauges measure Wash Temperature, Wash Pressure and Rinse Temperature.
Externally mounted spray hose with spray gun for easy cleaning and maintenance of machine.
Steam exhaust vent 12-7/8" diameter, consisting of 14 gauge rolled collar for PVC pipe connection mounted to the top of the machine. Machine pre-wired with control timer for the addition of a fan.
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 Tel: 800/263-5798 Fax: 905/562-4618
(1M) 8/16 Printed in U.S.A.
Champion, an Ali Group Company
Champion Industries, Inc.
3765 Chammpion Blvd., Winston-Salem, NC 27105
Tel: 336/661-1556 Fax: 336/661-1979
www.championindustries.com
Page 4
SPECIFICATIONS
MODEL RW-72 CART, CABINET,
RACK AND PAN WASHER
MODEL RW-72 WASHER
Optional Exhaust Fan
Optional Hood and Fan Assembly
Racks
Connections
Electrical Connections
575 voltage available in Canada
One (1) 12" diameter stainless steel fan, with 12-7/8" I.D. collar, mounted on washer to extract excess steam after final rinse cycle. 1/4 Hp TEFC or optional wash down duty motor, 120 volt, 1 phase, 1750 RPM, rated 500 CFM at .05" static pressure.
Stainless steel hood with 15" diameter stainless steel fan mounted over door to evacuate steam that escapes when door is opened. 1-1/2 Hp TEFC or optional wash down duty motor, 208/240 or 480 volt, 3 phase, 60 cycle, 3450 RPM, rated 2700 CFM at .08" static pressure.
(1) stainless steel sheet pan rack, standard. For custom racks, contact factory. Constructed of stainless steel formed angle, mig welded. Supplied with stainless steel casters and nylon wheels.
Water Inlet: 120°F, 1" NPT Water Drain: 2" NPT Overow: 1-1/4" NPT Electrical: Single point connection through knock out on electrical enclosure. Steam Heating Option: 3/4" NPT Natural or Propane Gas Heating Option: 3/4" NPT
Running Amps
Elec. Spec.
208 Volt
3 phase
240 Volt
3 phase
Electric Wash
Electric Booster
Steam Wash
Steam Booster
1
316 83 83
290 79 79
Infrared Gas Wash
Infrared Gas Booster
2
Certications
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 Tel: 800/263-5798 Fax: 905/562-4618
480 Volt
3 phase
1
Steam Supply: Consumption: 185 lbs./hr.
2
Gas Supply: Consumption: 180,000 BTU/hr.
UL and UL Sanitation Listed (all). CUL Listed.
146 41 41
Champion, an Ali Group Company
Champion Industries, Inc.
3765 Chammpion Blvd., Winston-Salem, NC 27105
Tel: 336/661-1556 Fax: 336/661-1979
www.championindustries.com
Loading...