Champion RW-54 User Manual

Project
Item No.
Quantity

MODEL RW-54 WASHER

STANDARD FEATURES

• Heavy-duty stainless steel construction

• 54 sheet pan capacity

• Easy to clean dual filtration system

• Adjustable wash and rinse cycles

• Moisture resistant control gauges

• Choice of tank heat:

electric, infrared gas or steam

• Fresh water sanitizing rinse

• Digital Control & Information Center

• 25 Hp wash pump

• Double skinned, hinged door design

• Self-contained water heater

• Recirculating wash water

• Precision engineered spray pattern

• One year parts and labor warranty

MODEL RW-54

Rack, Pan and

Utensil Washer

Shown with optional fold-away ramp

OPTIONS

Additional Panwasher and Rackwasher Models:

(1M) 12/15 Printed in U.S.A.

DG007

Photo is for general visual representation only.
Please refer to specifications for the latest
detailed product information.

RW-72RW-66RW-36

Champion Industries, Inc.

3765 Champion Blvd., Winston-Salem, NC 27105

Tel: [phone] Fax: [phone]

2674 N. Service Road,

Jordan Station, Ontario, Canada L0R 1S0

Tel: [phone] Fax: [phone]

www.championindustries.com

Champion, an Ali Group Company

MODEL RW-54

84"

80"

Wa

Rotating
Washer Arm
Assemblies

Rack, Pan and
Utensil Washer

Dimensions shown in inches

Hot Water

Connection

Electrical

Control Panel

Wash Thermometer

sh Pressure Gauge

MODEL RW-54 WASHER

Rinse Thermometer

Digital Control and

Information Center

Wash Down Hose
with Spray Nozzle

Wash Pump

Overflow Connection

Drain Valve

Opening

64"

67-1/2"

32"

Door

80"

84"

Rinse Tank

12" Diameter Vent

76-1/2"

Door

Opening

Rotating
Washer Arm
Assemblies

80"

14"

94"

SPECIFICATIONS

Machine Construction

12, 14, & 16 gauge stainless steel. All seams Tig welded.

Door

Double skinned stainless steel with exterior latch and

inside release handle.

Rotating Wash Hub & Spray Arm Assembly

Water driven, stainless steel, spray arm assembly with

124"

stainless steel jets, removable end caps and hand­operated, quick-release mechanism for easy cleaning
and reassembly. Mounted on stainless steel base.

Filter

Perforated stainless steel screen type. Double filtration

system for increased effectiveness and easy cleaning
without emptying the tank.

Water Pump

25 H.P., 208/240/480 volt, 3 phase, 60 cycle with output

of 430 gallons per minute at 40 to 50 P.S.I.

Digital Control & Information Center

120 volt control circuit with push pad operation of

“Power On”, “Stop” and “Short, Medium or Long Wash
Cycles”. A digital display indicates “Time Remaining”
for each cycle. LED’s indicate wash, rinse and unload
functions. A buzzer is also included to provide an
audible indication of time to unload. A pre-programmed
circuit board allows the push pad to be used as a
“Diagnostic Center” by displaying “Error Codes” for
ease of troubleshooting.

Gauges

Moisture resistant gauges measure wash temperature,

wash pressure and rinse temperature.

Wash Tank

Stainless steel with electric, infrared gas, live steamor

steamcoil heating, thermostatically controlled, low water
protected, sloped to drain with a 160-gallon capacity.

Rinse Tank

Stainless steel, 20 gallon capacity with 208/240 or 480

volt electric booster heaters. 18 kW total to provide
180°/19°F hot sanitizing rinse.

Racks

Constructed of stainless steel rod and formed angle,

heliarc welded.

Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.

Champion Industries, Inc., 3765 Champion Blvd., Winston-Salem, NC 27105 • 336/661-1556 • Fax: [phone] • www.championindustries.com

2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 800/263-5798 • Fax: [phone]