Page 1
Project
Item No.
Quantity
MODEL 2566 WASHER
STANDARD FEATURES
• Heavy-duty stainless steel construction
• 25 Hp waste pump
• Easy to clean dual filtration system
• Adjustable wash and rinse cycles
• Choice of tanks heat:
electric, infrared gas or steam
• Double skinned, hinged door design
• Digital Control & Information Center
• 66 sheet pan capacity
• Moisture resistant control gauges
• Self-contained water heater
• Recirculating wash water
• Fresh water sanitizing rinse
• Precision engineered spray patterns
• One year parts and labor warranty
MODEL 2566
Cart, Cabinet, Rack
and Pan Washer
OPTIONS
Additional Panwasher and Rackwasher Models:
1527 1536
(1M) 10/06 Printed in U.S.A.
DG015
2554 3072
(Shown with optional
fold-away ramp)
Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: 336/661-1556 Fax: 336/661-1979
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 905/562-4195 Fax: 905/562-4618
www.championindustries.com
Page 2
MODEL 2566
94"
90"
12" Diameter
Vent
Rotating
Wash Arm
Assemblies
Rinse Pump
70"
9
38"
Door
Opening
84" Door
Opening
R
87-1/2"
122"
14"
101-1/2"
H
ot Water
Connection
Rinse Tank
Electrical
Control Panel
Wash Thermometer
Wash Pressure Gauge
Rinse Thermometer
Digital Control and
Information Center
Wash Down Hose
with Spray Nozzle
Overflow Connection
Drain Valve
Wash Pump
R
73-1/2"
Cart, Cabinet,
Rack and Pan
Washer
MODEL 2566 WASHER
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
SPECIFICATIONS
Machine Construction
12, 14, & 16 gauge stainless steel.
All seams Tig welded.
Door
Double skinned stainless steel with
exterior latch and inside release handle.
Rotating Wash Hub & Spray Arm Assembly
Water driven, stainless steel, spray arm
assembly with stainless steel jets, removable
end caps and hand-operated, quick-release
mechanism for easy cleaning and reassembly.
Mounted on stainless steel base.
Filter
Perforated stainless steel screen type.
Double filtration system for increased
effectiveness and easy cleaning without
emptying the tank.
Water Pump
25 H.P., 208/240/480 volt, 3 phase,
60 cycle with output of 430 gallons
per minute at 40 to 50 P.S.I.
Digital Control & Information Center
120 volt control circuit with push pad
operation of “Power On”, “Stop” and “Short,
Medium or Long Wash Cycles”. A digital
display indicates “Time Remaining” for each
cycle. LED’s indicate wash, rinse and
unload functions. A buzzer is also included
to provide an audible indication of time to
unload. A pre-programmed circuit board
allows the push pad to be used as
a “Diagnostic Center” by displaying “Error
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Codes” for ease of troubleshooting.
Gauges
Moisture resistant gauges measure wash
temperature, wash pressure and rinse
temperature.
Wash Tank
Stainless steel with electric, gas, steam
or steam coil heating, thermostatically
controlled, low water protected, sloped
to drain with a 180-gallon capacity.
Rinse Tank
Stainless steel with one electric, infrared
gas or steam coil heating to provide
180°F/190°F hot sanitizing rinse.
Racks
Stainless steel built to match specific
washing requirements.
Dimensions shown in inches
Page 3
SPECIFICATIONS
MODEL 2566 CART, CABINET,
RACK AND PAN WASHER
Washer A
utomatic washing machine designed to wash and sanitize items commonly
used in the bakery, meat, poultry, candy and food service industries. Machine is
designed to be installed in a pit or used at floor level with a ramping system.
Cabinet 70" wide x 90" deep (100" with pass through option) x 101-1/2" high. Clearance
height: 122" when floor mounted, 108" when used in a pit. Standard door opening:
38" wide x 84" high. Wash chamber: 38" wide x 72" deep x 84" high. Constructed of
12, 14 & 16 gauge, type 304 #3 finish, stainless steel. All seams tig-welded. Seams,
where needed for water tight construction are continuously welded.
Door Standard right hand or optional left hand swing constructed of 14 and 16 gauge, type
304 #3, stainless steel with integral stainless steel framework. Door double skinned
for added strength. Equipped with door latch and inside release handle. Door is
interlocked with limit switch to prevent machine operation while open.
Washer Floor Floor constructed of 12 gauge stainless steel formed sheets designed to provide
maximum strength. Floor supports constructed of 2" x 2" x 1/4" stainless steel angle.
Recirculating Wash Tank Heated by 208/240 or 480 Volt electric immersion heaters, 42 kW total, thermostatically
controlled wash temperature with low water protection system. 180 gallon capacity.
14 gauge stainless steel, sloped to drain. Gas and steam heating options available.
Wash Tank Filter Perforated,stainless steel baskets. Designed for increased effectiveness and easy
cleaning without emptying wash tank.
Wash Tank Fill Valve Size 3/4" brass material, solenoid type for automatic.
Wash Tank Drain Valve Size 2" brass material, gate type for manual or electrically operated ball valve for
automatic option.
Wash Pump 25 H.P., 208/240 or 480 volt, 3 phase, 60 cycle. Close coupled; 430 gallons per
minute at 40 to 50 psi, mounted on 12 gauge stainless steel formed channel base.
Rotating Wash Hub & Water driven, stainless steel spray arm assembly with stainless steel jets removable
Spray Arm Assembly end caps and hand operated quick release mechanism for easy cleaning and
reassembly. Mounted on stainless steel base.
Sanitizing Pumped Rinse Stainless steel,14 gauge, 60 gallon capacity, supplied with 1-1/2 H.P. pump to provide
Tank 20 gallons of 180°/190° F. hot sanitizing rinse per 30 second cycle at 20 P.S.I.
Thermostatically controlled, low water protected with automatic fill. Available in
electric, gas or steam coil heating.
Final Rinse Piping Type 304 stainless steel tubing with brass compression fittings and brass or optional
stainless steel full cone rinse jets.
Control & Information Center 120 volt control circuit with push pad operation of “Power On,” “Stop” and
“Short, Medium or Long Wash Cycles.” A digital display indicates “Time Remaining”
for each cycle. LED’s indicate wash, rinse and unload functions. A buzzer is also
included to provide an audible indication when the machine is ready to unload. A preprogrammed circuit board allows the push pad to be used as a “Diagnostic Center”
by displaying “Error Codes” for ease of troubleshooting. Moisture resistant gauges
measure Wash Temperature, Wash Pressure and Rinse Temperature.
Optional Rinse Hose Externally mounted rinse hose with spray gun for easy cleaning and maintenance of
machine.
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 905/562-4195 Fax: 905/562-4618
(1M) 10/06 Printed in U.S.A.
Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: 336/661/1556 Fax: 336/661-1979
www.championindustries.com
Page 4
SPECIFICATIONS
MODEL 2566 CART, CABINET,
RACK AND PAN WASHER
Steam Exhaust Vent S
team exhaust vent 12-7/8" diameter, consisting of 14 gauge rolled stainless steel,
collar mounted to the top of the machine. Machine pre-wired with control timer for the
addition of a fan.
Optional Exhaust Fan 12" diameter exhaust fan mounted on washer to extract steam after rinse cycle.
Constructed for moisture laden air or other air stream contaminants. 500 CFM @
.05" static pressure. 1/4 H.P., 1750 RPM.
Optional Hood & Fan Stainless steel hood and fan assembly, mounted over door to evacuate
steam that escapes when door is opened. Fan specification is same as above.
Racks Customized to hold your specific items. Constructed of stainless steel rod and formed
angle, Mig welded. Supplied with stainless steel casters and nylon wheels.
Connections Water Inlet: 120° F, 1" NPT
Water Drain: 2" NPT
Overflow: 1-1/4" NPT
Electrical: Two point connection except 575 volt, which is single point.
Steam Heating Option: 3/4" NPT
Natural/Propane Gas Heating Option: 3/4" NPT
Services 120 Volt -1 phase, 5 running amps, 15 amp service, plus one of the following:
Running Amps
2
Elec. Spec.
208 Volt
3 phase
Electric Wash
Electric Booster
305
Steam Wash
Steam Booster
1
72
Infrared Gas Wash
Infrared Gas Booster
72
240 Volt
3 phase
480 Volt
3 phase
1
Steam Supply: Consumption: 345 lbs./hr. @ 15 psi minimum
2
Gas Supply: Consumption: 360,000 BTU/hr.
277
139
67
34
67
34
Certifications UL and UL Sanitation Listed (all). CUL Listed (electric and steam only).
Champion Industries, Inc.
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 905/562-4195 Fax: 905/562-4618
(1M) 10/06 Printed in U.S.A.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: 336/661/1556 Fax: 336/661-1979
www.championindustries.com
Loading...