Project
Item No.
Quantity
LD-20-PT WASHER
STANDARD FEATURES
• Heavy-duty stainless steel construction
• Pass-thru operation
• Heavy-duty 15 Hp pump
• 66" cabinet and a generous 20 pan capacity
• Recirculating wash water
• High velocity, stainless steel “V” jets
• Wash/rinse cycle of just 5 minutes
• Electric, gas or steam heat
• External wash down hose and spray gun
• Recirculating wash water
• Moisture resistant control gauges
• Digital Control & Information Center
• Self containing water heating
• Fresh water sanitizing rinse
• Removable, dual filtration system
• One-year parts and labor warranty
LD-20-PT
Pot, Pan and
Utensil Washer
OPTIONS
Tank Heat
Steam
Gas
Additional Lift Door and Split Door Models:
LD-12-PT LD-20 SD-20 SD-36
(1M) 1/06 Printed in U.S.A.
DG009
Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: 336/661-1556 Fax: 336/661-1979
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 905/562-4195 Fax: 905/562-4618
www.championindustries.com
Pot, Pan and
Utensil Washer
LD-20-PT
LD-20-PT WASHER
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
Dimensions shown in inches
28"
Door Opening
28-1/2"
Door
Opening
76-1/2"
81-1/2"
99"
34"
Lift
Height
36-1/4"
Wash Down
Hose with
Spray Nozzle
Hot Water
Connection
Wash Pump
Rinse Tank
Adjustable Legs
SPECIFICATIONS
Machine Construction
12, 14, & 16 gauge Stainless steel. All
seams tig welded, cleaned and polished.
Door
Stainless Steel, counter-balanced with
self-lubricating guides. Stainless steel
cables on nylon rollers with guards to
prevent jumping.
Spray Arm Assembly
Water driven, Stainless Steel spray arm
assembly with Stainless Steel jets,
removable end caps and hand operated
quick release mechanism for easy
cleaning and reassembly. Mounted on
Stainless Steel base.
Filter
Perforated, removable, Stainless Steel baskets.
Water Pump
15 Hp, 208/240 or 480 volt, 3 phase, 60
cycle with output of 250 gallons per
minute at 35 to 45 P.S.I.
Digital Control & Information Center
110 volt control circuit with push pad
operation of “Power On”, “Stop” and “Short,
Medium or Long Wash Cycles”. A digital
display indicates “Time Remaining” for
each cycle. LED’s indicate wash, rinse and
unload functions. A buzzer is also included
to provide an audible indication of time to
unload. A programmable controller allows
the push pad to be used as a “Diagnostic
Center” by displaying “Error Codes” for
ease of troubleshooting.
Gauges
Wash temperature, rinse temperature,
wash pressure. Special moisture
resistant design.
Wash Tank
Stainless Steel with electric, infrared gas
or steam coil heating. Thermostatically
controlled, low water protected, sloped to
drain 50 gallon capacity.
Booster Heater
Electric, infrared gas or steam coil heating
208/240 or 480 volt to provide 180°F/190°F
hot sanitizing rinse.
Racks
Stainless Steel rod, built to match
specific washing requirements.
66"
Drain Valve
12" Dia. Vent
Electrical
Control Panel
Wash Thermometer
Pressure Gauge
Rinse Thermometer
Digital Control and
Information Center
Overflow
Connection
73"
Access
Panel