EUCCW SERIES
EUCCW4, EUCCW6 and EUCCW8
Upright 29” Conveyor
Dual Rinse Dishwashing Machine
Champion, an Ali Group Company
STANDARD FEATURES
Project
Item No.
Quantity
• NEW Factory authorized startup
• ENERGY STAR® Qualified
• Exclusive Dual Rinse Technology
• All-purpose 29" wide peg belt
• Dish capacities up to 15,027 dishes per hour (NSF Certified)
• Automatic tank fill
• Chemical dispensing equipment
connection provisions
• Choice of tank heat: electric, steam
coils or direct steam injectors
• Common hot water connection
• Common drain connection
• Common electric connection (separate
connection required for optional electric
booster and blower-dryer)
• One piece stainless steel wash/rinse
manifold system, easy to remove
• Door safety switch
• Electric eye energy sentinel (idle pump shut-off)
• Easy-to-reach top-mounted controls
• Heavy-gauge stainless construction
• Low-water tank heat protection
• Push-button start-stop station – load end
• Recirculating flushing nozzles –
load end with prewash
• Rinse saver device
• Conveyor shut-off shelf – unload end
• Stainless steel enclosure panels – front & ends
• Vent fan control connection provided
OPTIONAL WORLD CLASS FEATURES
• Heat Recovery – redirects lost steam to heat
using less energy
EUCCW SERIES
Upright 29" Conveyor
Dual Rinse Dishwashing Machine
Photo is for general visual
representation only. Please refer
to specifications for the latest
detailed product information.
SPECIFIER STATEMENT
Specified unit will be Champion model EUCCW4,
EUCCW6 or EUCCW8 upright 29" conveyor water
saver dishwashing machine.
Features automatic tank fill, chemical dispensing
connection provisions, common water, drain and
electrical connections, door safety switch, low water
tank heat protection, rinse saver.
1 year parts and labor warranty.
The DualRinse feature offers the
Lowest Water/Utility/Chemical Consumption
as low as 57 GPH usage while circulating
as much as 400 gallons of water for
Consistently Good Results
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 905-562-4195 Fax: 905/562-4618
(pdf) 4/16
CH104
Champion Industries, Inc.
3765 Champion Boulevard, Winston-Salem, NC 27105 Tel:
336/661-1556 Fax: 336/661-1979
www.championindustries.com
Champion, an Ali Group Company
EUCCW SERIES
Upright 29" Conveyor
Dual Rinse
Dishwashing Machine
MODULAR SECTIONS: Right to Left Operation
EUCCW4
18-5/8"
[473]
39" [991]
CL
2
4' [1219]
4B
12" [305]
9'-4" CL-CL
[2845]
Overall Length “C”
5'-8"
[1727]
31-1/2"
[800]
Minimum For Screen Removal
Dimensions shown in inches and [millimeters]
[559]
1
4A
3
CL
29" [737]
Clearance
6" [152]
37-1/4"
[946]
6-1/4" [159]
Plumbing
Clearance
2'-1"
[635]
1'-10"
EUCCW SERIES UPRIGHT CONVEYORS
“B”
Unload
7" [178] 7" [178]
1/2 HP
36" [914]
10-1/2" [266]
2
TABLE A - Machine Connection
Machine Only - Electric Heat
Maximum
Overcurrent
Protective
Elec.
Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
208/60/3 171 200 200
240/60/3 149 175 175
480/60/3 74 90 90
4" [102]
4B
Device
4' [1219]
Wash
2'
[610]
Dual
Rinse
0.2
3
HP
5-1/2"
1
[140]
Wash
Machine-steam
Minimum
Supply Ckt.
Elec.
Specs.
Rated
Amps
Conductor
Ampacity
208/60/3 21 25 25
240/60/3 18 25 25
480/60/3 10 15 15
“A”
Load
2'-6"
[762]
Prewash
1
HPHP
Maximum
Overcurrent
Protective
Device
4" [102]
4A
3
1-5/8" [41]
19" [483]
Clear
38"
[965]
12" [305]
Plumbing
Clearance
100" [2540]
Door
Removal
95" [2413]
Doors Up
62" [1575]
Machine Height
Start/Stop
Notes:
• Load Section (A) Standard 5', contains
30" Prewash
• Prewash also available in a 48" HD section
• Non-standard load section available in
12" increments
• Minimum load length 5' (includes
30" prewash)
• Unload Section (B) Standard 5' contains
24" Aux.
TABLE B - Booster Connection
40°F/22°C Rise – 10kW Electric Built-in Booster
Maximum
Overcurrent
Protective
Device
Elec.
Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
208/60/3 28 35 35
240/60/3 24 30 30
480/60/3 12 15 15
70°F/39°C Rise - 18kW Electric Built-in Booster
Maximum
Overcurrent
Protective
Device
Elec.
Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
208/60/3 50 60 60
240/60/3 44 50 50
480/60/3 22 30 30
• Rinse and 36" belt, available in
12" increments
• Built in electric booster requires
a 5' minimum unload
• Built in steam booster requires
a minimum 6' unload
• Blow dryer section adds 4' to
overall length of machine
Contact Factory for additional voltages.
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., 3765 Champion Boulevard, Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
EUCCW SERIES
MODULAR SECTIONS: Right to Left Operation
Upright 29" Conveyor
Dual Rinse
Dishwashing Machine
Dimensions shown in inches and [millimeters]
EUCCW6
18-5/8"
[473]
39" [991]
CL
2
1/2 HP
36" [914]
4'
[1219]
12" [305]
“B”
Unload
7" [178]
5'-8"
2'-6"
[762]
PrewashDual
[1727]
“A”
Load
[102]
1
HP
[635]
4"
4A
7" [178]
4B
Overall Length “C”
2'
[610]
4"
[102]
4B
Rinse
0.2
HP
3'
[914]
Power
Rinse
3
HP
11'-4" CL-CL
6' [1829]
Wash/Rinse
[3454]
3
HP
31-1/2"
[800]
Minimum For Screen Removal
3'
[914]
5-1/2"
1
[140]
Wash
2'-1"
1'-10"
[559]
1
4A
3
6" [152]
CL
29" Clear
[737]
6-1/4" [159]
19"
[483]
Clear
38"
[965]
3
37-1/4"
[946]
12" [305]
Plumbing
Clearance
100" [2540]
Door
Removal
95" [2413]
Doors Up
62" [1575]
Machine
Height
Plumbing
Clearance
10-1/2"
2
[266]
TABLE A - Machine Connection
Machine Only - Electric Heat
Maximum
Overcurrent
Protective
Elec.
Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
208/60/3 183 250 250
240/60/3 158 200 200
480/60/3 80 100 100
Device
Machine-steam
Maximum
Overcurrent
Protective
Device
Elec.
Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
208/60/3 29 40 40
240/60/3 26 35 35
480/60/3 14 20 20
1-5/8"
[41]
Start/Stop
Notes:
• Load Section (A) Standard 5', contains
30" Prewash
• Prewash also available in a 48" HD section
• Non-standard load section available in
12" increments
• Minimum load length 5'
(includes 30" prewash)
• Unload Section (B) Standard 5'
contains 24" Aux.
TABLE B - Booster Connection
40°F/22°C Rise – 10kW Electric Built-in Booster
Maximum
Overcurrent
Protective
Device
Elec.
Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
208/60/3 28 35 35
240/60/3 24 30 30
480/60/3 12 15 15
70°F/39°C Rise - 18kW Electric Built-in Booster
Maximum
Overcurrent
Protective
Device
Elec.
Specs.
Rated
Amps
Minimum
Supply Ckt.
Conductor
Ampacity
208/60/3 50 60 60
240/60/3 44 50 50
480/60/3 22 30 30
• Rinse and 36" belt, available in
12" increments
• Built in electric booster requires
a 5' minimum unload
• Built in steam booster requires
a minimum 6' unload
• Blow dryer section adds 4' to
overall length of machine
Contact Factory for additional voltages.
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., 3765 Champion Boulevard, Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
EUCCW SERIES
Upright 29" Conveyor
Dual Rinse
Dishwashing Machine
MODULAR SECTIONS: Right to Left Operation
EUCCW SERIES UPRIGHT CONVEYORS
Dimensions shown in inches and [millimeters]
EUCCW8
18-5/8"
[473]
CL
39" [991]
2
1/2 HP
36" [914]
4' [1219]
12" [305]
“B”
Unload
7" [178]
4B
4" [102]
4B
13'-4" CL-CL
[4064]
Overall Length “C”
8' [2438]
Wash/Rinse
2'
[610] [1219] [1219]
Dual
Rinse
0.2HP3
HP
4'
Power
Rinse
4'
1
Wash
3
HP
5'-8"
[1727]
31-1/2"
[800]
Minimum For Screen Removal
Load
2'-6"
5-1/2"
[140]
[762]
Prewash
1
HP
“A”
[102]
4"
2'-1"
[635]
1'-10"
[559]
4A
7" [178]
3
1
4A
3
CL
29" [737]
19" [483]
Clear
[965]
Clear
38"
6" [152]
37-1/4"
[946]
6-1/4" [159]
12" [305]
Plumbing
Clearance
100" [2540]
Door
Removal
95" [2413]
Doors Up
62" [1575]
Machine
Height
Plumbing
Clearance
10-1/2" [266]
TABLE A - Machine Connection
Machine Only - Electric Heat
Supply Ckt.
Elec.
Specs.
208/60/3 183 250 250
240/60/3 158 200 200
480/60/3 80 100 100
TABLE B - Booster Connection
40°F/22°C Rise – 10 kW Electric built-in booster
Elec.
Specs.
208/60/3 28 35 35
240/60/3 24 30 30
480/60/3 12 15 15
Champion Industries, Inc., 3765 Champion Boulevard, Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
Rated
Amps
Rated
Amps
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Conductor
Supply Ckt.
Conductor
2
Machine-steam
Minimum
Ampacity
Minimum
Ampacity
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Minimum
Overcurrent
Protective
Device
Minimum
Overcurrent
Protective
Device
Minimum
Supply Ckt.
Elec.
Specs.
208/60/3 29 40 40
240/60/3 26 35 35
480/60/3 14 20 20
70°F/39°C Rise – 18kW Electric built-in booster
Elec.
Specs.
208/60/3 50 60 60
240/60/3 44 50 50
480/60/3 22 30 30
Contact Factory for additional voltages.
Rated
Amps
Rated
Amps
Conductor
Ampacity
Minimum
Supply Ckt.
Conductor
Ampacity
Minimum
Overcurrent
Protective
Device
Minimum
Overcurrent
Protective
Device
1-5/8"
[41]
Start/Stop
Notes:
• Load Section (A) Standard 5', contains
30" Prewash
• Prewash also available in a 48" HD section
• Non-standard load section available in
12" increments
• Minimum load length 5'
(includes 30" prewash)
• Unload Section (B) Standard 5'
contains 24" Aux.
• Rinse and 36" belt, available in
12" increments
• Built in electric booster requires a
5' minimum unload
• Built in steam booster requires a
minimum 6' unload
• Blow dryer section adds 4' to overall
length of machine
EUCCW SERIES
Upright 29" Conveyor
Dual Rinse
Dishwashing Machine
Shipping weight crated: 150 lbs./ft.[68kg./m.]
Height with doors up: 95"
Height to remove doors: 100"
SPECIFICATIONS
Ca pacities EUCCW4 EUCCW6 EUCCW8
Dishes per hr. (NSF rated) 9,965 13,445 15,027
Conveyor speed (ft./min.) 6.3 8.5 9.5
Motor horsepower
Drive 1/2 Hp 1/2 Hp 1/2 Hp
Prewash 30" [762] 1 Hp 1 Hp 1 Hp
Prewash 48" [1219] 3 Hp 3 Hp 3 Hp
Wash 3 Hp 3 Hp 3 Hp
Power Rinse* N/A 3 Hp 3 Hp
Auxiliary Rinse 1/5 Hp 1/5 Hp 1/5 Hp
Water consumption
Gal. per hr. (max. use) 58 57 58
Temperatures °F
Wash (min.) 160 150 150
Power Rinse (min.)* N/A 160 160
Auxiliary Rinse (min.) 165 165 165
Final rinse (min.) 180 180 180
Heating
Tank heat Steam Electric
Wash tank 125 lbs./hr. 25 kW
Wash tank (EUCCW4) 225 lbs./hr. 45 kW
Rinse tank * 100 lbs./hr. 20 kW
Auxiliary rinse 50 lbs./hr. 10 kW
Electric booster 10 10 10
(kW required for 40°F rise)
Electric booster 18 18 18
(kW required for 70°F rise)
Steam booster 50 50 50
(lbs./hr. required for 40°F rise)
Steam booster 90 90 90
(lbs./hr. required for 70°F rise)
Venting
Minimum CFM, load end 300
Minimum CFM, unload end 800
*EUCCW4 has no power rinse tank
Utilities EUCCW4
1
Electrical Connection
A Machine connection (see table A)
B Booster connection (see table A)
2
Hot Water
3/4" NPT 180°F hot water connection.
(For machine without built-in booster)
3
Drain
2" NPT connection, 62 gpm max flow rate
4
Vents
A Load end: 300 CFM 1/4" S.P.
B Unload end: 800 CFM 1/4" S.P. With blower-dryer,
increase room ventilation by 600 CFM.
Utilities EUCCW6
1
Electrical Connection
Contact factory for specific machine electrical requirements
NOTE: Electric booster connection – contact Factory
2
Hot Water
3/4" NPT 180°F hot water connection.
(For machine without built-in booster)
3
Drain
2" NPT connection, 62 gpm max flow rate
4
Vents
A Load end: 300 CFM 1/4" S.P.
B Unload end: 800 CFM 1/4" S.P. With blower-dryer,
increase room ventilation by 600 CFM.
Utilities EUCCW8
1
Electrical Connection
Contact factory for specific machine electrical requirements
NOTE: Electric booster connection – contact Factory
2
Hot Water
3/4" NPT 180°F hot water connection.
(For machine without built-in booster)
3
Drain
2" NPT connection, 62 gpm max flow rate
4
Vents
A Load end: 300 CFM 1/4" S.P.
B Unload end: 800 CFM 1/4" S.P. With blower-dryer,
increase room ventilation by 600 CFM.
Booster connections may vary. Contact the Factory.
Standard Voltages (Specify choice): 208/60/3, 240/60/3, and
480/60/3. Available in 3-phase only. For non-standard 3-phase voltages,
contact the Factory.
Plumbing Notes Because of the variation in house-supplied water
pressure, a water pressure regulating valve (PRV) is needed (water
PRV is standard with a booster). Steam PRV’s may be required for
pressure higher than 30 psi. The PRVs can either be purchased from
Champion or obtained locally.
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., 3765 Champion Boulevard, Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
Warning Plumbing and electrical connections should be made by
qualified personnel who will observe all the applicable plumbing,
sanitary, safety codes and the National Electrical Code.
Note Water Hammer Arrestor (meeting ASSE-1010 standard or
equivalent) to be supplied (by others) in common water supply line
at service connection.
Venting Notes
Fabricated duct size: 3-7/8" x 23-7/8" (outside dimensions)
Champion, an Ali Group Company
EUCCW SERIES
Upright 29" Conveyor
Dual Rinse
Dishwashing Machine
Control Panel Digital Gauges
EUCCW SERIES UPRIGHT CONVEYORS
OPTIONS & ACCESSORIES
□ Tank heat; choices of electric, steam coil or
steam injectors
□ Booster Heaters – stainless steel
(completely inter-plumbed, controls are
inter-wired)
□ Electric: (40°F rise or 70°F rise)
□ Steam: (40°F or 70°F rise)
□ 48" Blower Dryer, electric or steam (add 4' to
overall length)
□ Belts: standard peg belt, flat belt, thermal tray
belt, silverware belt, belts with upper cross rods,
and other select combination belts
□ Start/Stop station, unload end
□ Back panels, stainless steel
□ Cold water thermostat (for pre-wash)
□ External scrap bucket on 48" pre-wash
(standard on 30" pre-wash)
□ External scrap bucket on wash tank
□ Insulated hoods, lower panels
□ Motor pumps, 2 or 3 Hp optional in lieu of 1 Hp
on pre-wash
□ Bumper rail, machine mounted
□ Steam pressure regulating valve (unmounted
□ Drain water tempering kit (mounted)
□ Insulated hinged door
□ Shock arrestor (water)
Heat Recovery –
Redirects lost steam to heat using less energy.
Heated 110°F water
travels back to booster
Water leaves
booster at
180°F+
and travels to
nal rinse arms
□ Drain interlocks
□ Heat Recovery Unit redirects lost steam to
heat using less energy
� NEW Champion ION scale prevention system
Booster
60°F incoming water
to machine.
Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.
Champion Industries, Inc., 3765 Champion Boulevard, Winston-Salem, NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618
(pdf) 4/16 Printed in U.S.A.
Champion Industries, Inc.
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 905/562-4195 Fax: 905/562-4618
Champion Industries, Inc.
3765 Champion Blvd., Winston-Salem, NC 27105
Tel: 336/661-1556 Fax: 336/661-1979
www.championindustries.com
Champion, an Ali Group Company
Loading...