Cgv COMLINE 2A+ User notes

- Automatically connects (no need of manual intervention) two video or RGB sources to your TV
set.

- Allows you to record one or the other source on your VCR with automatic connection.

- 100% compatible 16/9.

1 - INSTALLATION

- Connect the "OUTPUT (TV)" scart socket of your COMline 2A+ to your TV set with the scart cable
included.
Using suitable cables (21-PIN scart/scart cable): connect to the "VCR / C+" socket the source N°1 (VCR,
DVB-T receiver, digital or analog satellite, DVD...).

- Connect to the "AUX (TNT, DVD, SAT...)" socket the source N°2 (DVB-T receiver, digital or analog
satellite, DVD, VCR).

- Plug the 12V power adaptor into the front of the COMline 2A+.

2 - HOW TO USE

- Switch ON the video source which you want to watch on your television set. COMline 2A+ will automa­tically establish a connection towards this one.

- When you switch OFF your source N°1, the television set will show your source N°2 automatically and
vice versa.

- If your video device does not have slow switching, please connect it in priority on the "VCR / C+" soc­ket.

- "Hi-Fi OUTPUT": You can connect your video appliances to your Hi-Fi system with a "3.5 Jack
mm/RCA" cable (not supplied).

- To record on your VCR the appliance connected to "AUX (TNT, DVD, SAT...)", just switch it on. It will be
automatically routed to the VCR.

- To record the TV (connected on "OUTPUT (TV)") just switch off the appliance connected to "AUX (TNT,
DVD, SAT...)".

3- TECHNICAL FEATURES

Adaptator : Power adaptator 230V/12V-50Hz.
Diaphoty : >50 dB
Dimming of the RGB signals: < 0,5 dB
2 RGB fully-wired scart connectors
Commutation of all video, audio, RGB, SC, between both scart sockets.

AUTOMATIC COMMUTATOR-2 INPUTS WITH SCART SOCKETS

COMline 2A+

COMPAGNIE GENERALE DE VIDEOTECHNIQUE

OSTWALD - www.cgv.fr