Central Machinery 46769 User Manual
ELECTRIC DRAIN CLEANER
46769
SET UP AND OPERATING INSTRUCTIONS
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2002 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of Harbor
Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements,
actual product may differ slightly from the product described herein. Tools required for assembly and service
may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
SPECIFICATIONS
Electrical Requirements 115 V, 60 Hz, 1/3 HP
8.3 Start Up Amps, 4.7 No Load Amps
Power Switch Steel Toggle Switch
Normal – Off - Unbind
Overall Dimensions 20” L x 14” W x 20-1/2” H
Drum Dimensions 13” Diameter x 8” Wide
Drain Pipe Capacity 2” to 4” Diameter
Cutter Accessories Arrow Head, Boring Gimlet,
1-1/2” U-Cutter, 1-1/4” Side Cutter Blade
Construction 1” & 1-1/4” Square Steel Tubing
3/16” Thick Steel Plate
Rubber & PVC
Cable Size/Length 1/2” Diameter x 50’ Long
Weight 70.2 Pounds
Note: Due to the environment this tool is used in, it must be powered by a 3 prong grounded
GFCI (Ground Fault Circuit Interrupter) protected circuit or outlet.
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product’s serial number in the back of the manual near the assembly diagram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
SAFETY WARNINGS AND PRECAUTIONS
KEEP WORK AREA CLEAN AND DRY. 1. Cluttered, damp or wet work areas invite
injuries.
KEEP CHILDREN AWAY FROM WORK AREA. 2. Do not allow children to handle
this product.
STORE IDLE EQUIPMENT. 3. When not in use, tools and equipment should be stored
in a dry location to inhibit rust. Always lock up tools and equipment and keep out
of reach of children.
DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR 4.
DRUGS. Read warning labels on prescriptions to determine if your judgment or
reflexes are impaired while taking drugs. If there is any doubt, do not attempt to
use this product.
INDUSTRIAL APPLICATIONS MUST FOLLOW OSHA REQUIREMENTS.5.
Rev 01/03; 09/03; 02/06; 03/06
SKU 46769 For technical questions, please call 1-800-444-3353. Page 2
DO NOT OVERREACH. 6. Keep proper footing and balance at all times to prevent
tripping, falling, back injury, etcetera.
STAY ALERT. 7. Watch what you are doing at all times. Use common sense. Do not
use this product when you are tired or distracted from the job at hand.
CHECK FOR DAMAGED PARTS. 8. Before using this product, carefully check that it
will operate properly and perform its intended function. Check for damaged parts
and any other conditions that may affect the operation of this product. Replace or
repair damaged or worn parts immediately.
REPLACEMENT PARTS AND ACCESSORIES. 9. When servicing, use only identi-
cal replacement parts. Only use accessories intended for use with this product.
Approved accessories are available from Harbor Freight Tools.
MAINTAIN THIS PRODUCT WITH CARE. 10. Keep this tool clean and dry for better
performance. For your safety, service and maintenance should be performed regu-
larly by a qualified technician.
USE THE RIGHT PRODUCT FOR THE RIGHT JOB. 11. There are certain applications
for which this product was designed. Do not use small equipment, tools or attach-
ments to do the work of larger industrial equipment, tools or attachments. Do not
use this product for a purpose for which it was not intended.
GUARD AGAINST ELECTRIC SHOCK. 12. Do not submerge the Motor Housing (8)
in water or other liquids. Always prevent body contact with grounded surfaces such
as pipes, radiators, ranges, refrigerators, etcetera.
Do not operate the Electric Drain Cleaner if the operator or machine is standing in
water. To comply with the National Electric Code (NFPA70), and to provide additional
protection from the risk of electrical shock, the Electric Drain Cleaner must only be
connected to a receptacle that is protected by a Ground Fault Circuit Interrupter
(GFCI).
PEOPLE WITH PACEMAKERS SHOULD CONSULT THEIR PHYSICIAN(S) BE-13.
FORE USE. Electromagnetic fields in close proximity to heart pacemaker could
cause pacemaker interference or pacemaker failure.
REDUCE THE RISK OF FIRE AND/OR EXPLOSION. 14. Sparks inside the Motor as-
sembly can ignite flammable vapors, liquids, and dust. Do not use the Electric Drain
Cleaner in the presence of any flammable, combustible, or explosive substances.
PREVENT THE CABLE FROM WHIPPING BY PLACING THE DRAIN CLEANER 15.
AS CLOSE TO THE DRAIN LINE AS POSSIBLE (A MAXIMUM OF 2 FEET OF
CABLE SHOULD BE EXPOSED).
DO NOT USE THE ELECTRIC DRAIN CLEANER IN A LINE CONTAINING CHEMI-16.
CAL DRAIN CLEANERS. Exposure to these chemicals can cause injury to the
operator and/or damage the machine.
SKU 46769 For technical questions, please call 1-800-444-3353. Page 3
DRESS SAFELY. 17. Nonskid footwear or safety shoes should be used when work-
ing with this product. Do not wear loose clothing or jewelry as they can become
caught in moving parts. Wear a protective hair covering to prevent long hair from
becoming caught in moving parts. If wearing a long-sleeve shirt, roll sleeves up
above elbows.
USE EYE, HAND, AND BREATHING PROTECTION. 18. Wear ANSI-approved splash-
resistant safety goggles, NIOSH-approved dust mask/respirator, and heavy-duty
LEATHER gloves during use. Use care near the sharp edges of the drum.
USE HEAVY-DUTY LEATHER GLOVES ONLY. Cloth gloves can become caught between the rotating coils of the Cable (37), resulting in
loss of fingers.
This product contains or produces a chemical known to the State of California 19.
to cause cancer and birth defects (or other reproductive harm).
(California Health & Safety Code § 25249.5, et seq.)
DO NOT USE ANY EXTENSION CORD ON THIS ITEM.20.
GUARD AGAINST CABLE BREAKAGE. 21. Before each use, check the cable for
kinks or any damage. Never use a damaged cable. Protect the cable from rust
by maintaining and lubricating it in accord with the maintenance section and chart
near the end of the manual.
AVOID DRAIN LINE DAMAGE. 22. Some city drain line systems may have pipes that
are too fragile for this machine. If you are going to probe into unfamiliar plumbing
with this machine, first stop and contact your sewer line authority or a local plumber
for advice.
THE WARNINGS AND PRECAUTIONS DISCUSSED IN THIS MANUAL CANNOT 23.
COVER ALL POSSIBLE CONDITIONS AND SITUATIONS THAT MAY OCCUR.
The operator must understand that common sense and caution are factors that
cannot be built into this product, but must be supplied by the operator.
UNPACKING
When unpacking, check to make sure all parts shown on page 8 are included. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown on
the cover of this manual as soon as possible.
REV 09/03
SKU 46769 For technical questions, please call 1-800-444-3353. Page 4
Loading...