CENTRAL BRASS 80047-UA4 User Manual
Central Brass
C O M P A N Y
MODEL NO. 80047-UA4
SINK FIXTURE
Brecksville, Ohio 44141
Phone: (216) 883-0220 Fax: (440) 526-5745
www.CentralBrass.com
The wall mounted sink tting is designed with a
solid cast brass body with replaceable seats. The
anges are all brass and have 1/2-inch female pipe
connections. The inlet supply location is adjustable
by rotating the ange to obtain a 1/4-inch center
variation. The 14-inch spout has a water saving
aerator that limits the ow. The stems are all brass
with a double O-Ring seal and rubber seat washer.
The canopy handles are zinc die cast with a chrome
plated nish. The faucet and anges are polished
and copper, nickel, and chrome plated.
Flow Rate: 2.0 GPM @ 60 psi
ADA Compliant and Meets ASME A112.18.1M
Certied by IAPMO R&T to NSF/ANSI 61
ADA COMPLIANT
Installation Drawing
04-09-09
Central Brass
C O M P A N Y
MODEL NO. 80047-UA4
SINK FIXTURE
Brecksville, Ohio 44141
Phone: (216) 883-0220 Fax: (440) 526-5745
www.CentralBrass.com
# Part # Description
1 2831-CP Brass Faucet Body
2 1028-Y Nylong Gasket
3 184-A Celcon Retainer
4 183-A Rubber Seal
5 182 Ceramic Disc - Lower
6 181 Ceramic Disc - Upper
7 352-S Brass Stem
8 180 Celcon Washer
9 1038-E14 O-Ring
10 352-B Brass Bonnet
11 352-SS Brass Stop
12 352-CR Crescent Ring
ADA COMPLIANT
Parts Breakdown
# Part # Description
13 523-C Handle Indexed “C”
13 523-H Handle Indexed “H”
14 107-F Brass Phillips Head Screw
15 1038-KN O-Ring
16 166-F Stainless Steel Snap Ring
17 PF-782-DES Brass Spout Nut
18 PF-363-MA Brass Swivel Spout
19 30-M Female Aerator
20 2807 Flange
21 PF-2843-49 Brass Hex Spout Nut
22 PF-256-L Brass Spud
23 940-TRN Washer
24 SU-352-L Left Thread Stem Assembly
24 SU-352-R Right Thread Stem Assembly
25 SU-2807 Brass Flange Assembly
04-09-09
Loading...