CENTRAL BRASS 80047-UA1 User Manual

Brecksville, Ohio 44141

Central Brass

C O M P A N Y

Phone: [phone] Fax: [phone]

www.CentralBrass.com

The wall mounted sink tting is designed with a solid cast
brass body with replaceable seats. The anges are all

brass and have 1/2-inch female pipe connections. The

inlet supply location is adjustable by rotating the ange

to obtain a 1/4-inch center variation. The 8-inch spout

has a water saving aerator that limits the ow. The
stems are all brass with a double O-Ring seal and rub-

ber seat washer. The canopy handles are zinc die cast

with a chrome plated nish. The faucet and anges are

polished and copper, nickel, and chrome plated.

Flow Rate: 2.0 GPM @ 60 psi
ADA Compliant and Meets ASME A112.18.1M

Certied by IAPMO R&T to NSF/ANSI 61

MODEL NO. 80047-UA1

SINK FIXTURE

Installation Drawing

04-09-09

Brecksville, Ohio 44141

Central Brass

C O M P A N Y

Phone: [phone] Fax: [phone]

www.CentralBrass.com

MODEL NO. 80047-UA1

SINK FIXTURE

Parts Breakdown

# Part # Description

1 2831-CP Brass Faucet Body

2 1028-Y Nylong Gasket

3 184-A Celcon Retainer

4 183-A Rubber Seal

5 182 Ceramic Disc - Lower

6 181 Ceramic Disc - Upper

7 352-S Brass Stem

8 180 Celcon Washer

9 1038-E14 O-Ring

10 352-B Brass Bonnet

11 352-SS Brass Stop

12 352-CR Crescent Ring

# Part # Description

13 523-C Handle Indexed “C”

13 523-H Handle Indexed “H”

14 107-F Brass Phillips Head Screw

15 1038-KN O-Ring

16 166-F Stainless Steel Snap Ring

17 PF-782-DES Brass Spout Nut

18 PF-363-RA Brass Swivel Spout

19 30-M Female Aerator

20 2807 Flange

21 PF-2843-49 Brass Hex Spout Nut

22 PF-256-L Brass Spud

23 940-TRN Washer

24 SU-352-L Left Thread Stem Assembly

24 SU-352-R Right Thread Stem Assembly

25 SU-2807 Brass Flange Assembly

The parts listed in the parts breakdown above may not be
offered separately as replacement parts. Please review the

Replacement Parts page for the authorized replacement parts

that are available for this item.

04-09-09