CENTRAL BRASS 6066 Installation Manual

TWO-VALVE

BATH FILLER, SHOWER &

BATH & SHOWER

Cast Brass Body

6" Centers, I.P. Unions, Compression Stems, Replaceable Seats

6056 Series Bath V alve only
6066 Series Bath Filler V alve only with T win Ell & 3/4 IPS Diverter
6076 Series Bath & Shower V alve same as 6066 wIth Shower Head, Arm & Flange
6086 Series Bath Filler V alve with 1/2 IPS Brass Spout
6266 Series Shower V alve with Shower Head, Arm & Flange

CENTRAL BRASS MFG CO

2950 East 55th Street, Cleveland, Ohio 44127

Phone: [phone] Fax: [phone] Email: sales @CentralBrass.com

031403 I-6056

www.CentralBrass.com

INSTALLATION INSTRUCTIONS

Roughing In Instructions

1. Locate and install valve assembly as shown.

2. Connect hot and cold supply lines.

3. Fabricate and install line for showerhead and spout.

4. Anchor fittings to studs in proper location.

5. T est for operation and leakage before finishing wall.

6. Install protectors on all exposed fittings.

3/4 IPS Diverter Spout

NOTE: Flush waterlines to

remove debris before

installation.

Finishing Instructions

1. Remove fitting protectors.

2. Apply putty as required to prevent water damage to wall.

3. Install finished trim.

4. T est for operation and leakage.

CENTRAL BRASS MFG CO

2950 East 55th Street, Cleveland, Ohio 44127

Phone: [phone] Fax: [phone] Email: sales @CentralBrass.com

031403 I-6056

www.CentralBrass.com