CENTRAL BRASS 3127-DA User Manual

MODEL NOS.

Central Brass

C O M P A N Y

3127-DA 3127-DAV

Brecksville, Ohio 44141

Phone: [phone] Fax: [phone]

www.CentralBrass.com

The slow closing widespread faucet has individual cast brass

bodies connected to a cast brass spout with exible tubes.

The chrome plated brass push button handles are used to
actuate the faucet and to make the external adjustments to
the cycle time. The button is then locked at the time setting
with a set screw. The faucet on time is set at the factory at
approximately 3-1/2 seconds. Longer cycle time is possible
with internal adjustments. All of the internal parts are brass
or stainless steel. The seals and O-Rings are rubber. The

spout is tted with a water saving aerator that limits the ow

rate, also available with a vandal resistant water saving aera-

tor ( V sufx). The stopper and guide assembly can be easily

removed for cleaning.

Flow Rate: 0.5 GPM @ 60 psi
ASME A112.18.1M
Meets ANSI/NSF Standard 61, Section 9, for Lead

WIDESPREAD SLOW CLOSING

LAVATORY FAUCET

Installation Drawing

04-08-09

MODEL NOS.

Central Brass

C O M P A N Y

3127-DA 3127-DAV

Brecksville, Ohio 44141

Phone: [phone] Fax: [phone]

www.CentralBrass.com

WIDESPREAD SLOW CLOSING

LAVATORY FAUCET

Parts Breakdown

The parts listed in the parts breakdown above
may not be offered separately as replacement
parts. Please review the Replacement Parts
page for the authorized replacement parts that
are available for this item.

04-08-09