CENTRAL BRASS 1137-DA-Q User Manual

MODEL NO. 1137-DA

Central Brass

C O M P A N Y

1137-DA-Q 81137-DA

Brecksville, Ohio 44141

Phone: [phone] Fax: [phone]

www.CentralBrass.com

O-Ring Compression 1/4-Turn Compression Ceramic Units

1137-DA 1137-DA-Q 81137-DA

The lavatory centerset is designed with a solid cast brass body with shanks located on four inch centers
for supply connections and mounting. The stems are all brass, with a double O-Ring seal and rubber seat
washer (for compression stems) or ceramic sealing discs (for ceramic units). The canopy handles are zinc

die cast with a chrome plated nish. The faucet body is polished and copper, nickel, and chrome plated.
The faucet is tted with a water saving aerator that limits the ow rate. The pop up drain is brass with a
chrome plated nish. The stopper and guide assembly can be easily removed for cleaning.

Flow Rate: 2.0 GPM @ 60 psi
ADA Compliant and Meets ASME A112.18.1M

Certied by IAPMO R&T to NSF/ANSI 61

with POP-UP DRAIN

Installation Drawing

CENTERSET LAVATORY FITTING

01-16-09

MODEL NO. 1137-DA

Central Brass

C O M P A N Y

1137-DA-Q 81137-DA

Brecksville, Ohio 44141

Phone: [phone] Fax: [phone]

www.CentralBrass.com

Handle variations available

Faucets with lever, wrist or elbow
handles with compression or ceramic
stem cartridges are ADA compliant.

ELS - Sufx

Wrist 4-inch

EL - Sufx

Elbow 6-inch

G-4147 (4-inch)
G-4149 (6-inch)

CENTERSET LAVATORY FITTING

with POP-UP DRAIN

Prex

10, 18, 20, 28
Villager Lever

K-512-02 (chrome)
K-512-15 (white)

 If faucet has lever handles, use one Hot and one Cold stem assemblies

01-16-09