CENTRAL BRASS 101137 Installation Manual
Centerset Faucet
1137 - Series
1138 - Series
4-Inch Centers
Cast Brass Body
81137 - Series
101137 - Series
181137 - Series
201137 - Series
281137 - Series
Faucets with lever, wrist or elbow
handles and compression or ceramic
stem cartridges are ADA compliant.
CENTRAL BRASS MFG CO
2950 East 55th Street, Cleveland, Ohio 44127
Phone: 216-883-0220 Fax: 216-883-0875 Email: sales @CentralBrass.com
031303 I-1137
www.CentralBrass.com
Certified to
ANSI/NSF 61 Section9
INSTALLATION INSTRUCTIONS
80 - Silver Crown Handle Suffix
GUIDE FOR INSTALLING CENTERSET
1. Apply a layer of sof t putty (plumbers set) to underside of faucet body . Insert threaded faucet
shanks down through holes in lavatory .
2. From underside assemble steel washer (54) and locknut (7133-AL) on each shank and tighten
securely .
3. Connect faucet to water supply lines as indicated by hot and cold handles. Brass coupling nuts
(4015-BAR) are provided.
4. Turn on supply lines. Check all connections for leakage.
5. Turn on hot and cold water for one minute to flush out dirt and sediment that might have
accumulated during installation.
6. Install aerator onto end of spout.
CENTRAL BRASS MFG CO
2950 East 55th Street, Cleveland, Ohio 44127
Phone: 216-883-0220 Fax: 216-883-0875 Email: sales @CentralBrass.com
031303 I-1137
www.CentralBrass.com
Loading...