www.cel-.com
Cel-Fi GO M is optimized for mobile
applications such as trucks, boats, and
RVs. It features the IntelliBoost™ technology
which allows it to automatically adjust to the
fast changing cellular network conditions
as you move. ONLY when the signal is poor,
will the Intelliboost maximizes gain while
boosting thus preventing any potential
degradation of existing cellular service.
Basic Functionality
The Cel-Fi GO M connects to an external Donor Antenna to draw in
a cellular signal from the macro network. The Cel-Fi GO M Smart
Signal Booster nds the appropriate cellular signal, per the product’s
conguration, improves the signal, and amplies it. Improved
service is provided to the user via the Server Antenna.
Note: A Stationary version (“GO X”) of the product is available. Go to
cel-.com for details.
Cel-Fi WAVE Mobile App
The Cel-Fi WAVE app provides a User Interface to Cel-Fi systems.
The app’s dashboard shows the system “Boost” value. A numeric
representation mapped to the amount of Signal Gain the system
is providing. Higher is better, with nine (9) being the highest value.
Cel-Fi WAVE and Cel-Fi GO M
Your Cel-Fi GO M will automatically select the strongest cellular
signal to boost. However, you may manually congure the system
preferences using Cel-Fi WAVE. Connect to Cel-Fi GO M with a
bluetooth enabled mobile device, and manage the boost settings.
NEMA 4 Rating
The Cel-Fi GO M is NEMA 4 rated, and can be used both indoors
and outdoors.
The NEMA 4 rating provides the following advantages:
• A degree of protection against ingress of solid foreign objects
(falling dirt and windblown dust)
• A degree of protection from the ingress of water (rain, sleet,
snow, splashing water, and hose directed water)
• Equipment will be undamaged by the external formation of ice
on the enclosure
qsg_GO-M-Eng_17-0309
ISSUE MEANING ACTION
Continual Blinking
GREEN
Unit is operational,
but not attaching to a
network to boost.
• Make sure both antennas are connected
properly and are appropriate for the
desired frequencies to boost.
• Make sure the selected operator to
relay is available at your location. This
can be checked with the Cel-Fi WAVE
application. If the service is not available,
it cannot be boosted.
Solid RED LED Unit is not
operational.
• Unplug and reinsert power.
• If restart has no effect, contact vendor for
remedy.
Troubleshooting
LED MEANING
Solid GREEN The unit is working properly and boosting properly.
Blinking GREEN Unit is scanning for networks to boost.
Blinking RED The unit is in an error condition. Use the Cel-Fi WAVE app to
check the error code meaning and remedy.
Solid RED The unit has a hardware error and is not booting up normally.
Cel-Fi GO M features an LED on the top face to indicate the
unit’s state:
Note: In mobile usage, it is normal for the Cel-Fi GO M to uctuate between
scanning and boosting. The Cel-Fi GO M automatically adjusts its boost
behavior based on available signal.
User Interface
The following antennas are authorized to be used with Cel-Fi GO M
Smart Signal Booster:
Antenna Kitting
MODEL DESCRIPTION FREQUENCY
A41-V21-100
Mobile Mag Mount 698-960 // 1710-2700 MHz
CERTIFICATION BAND SUPPORT
FCC, Australia 2/4/5/12/13/28
DONOR SERVER
3
MODEL DESCRIPTION FREQUENCY
A41-V21-101
Mobile Mag Mount 698-960 // 1710-2700 MHz
CERTIFICATION BAND SUPPORT
CE 1/3/5/7/8/20
DONOR SERVER
3
MODEL DESCRIPTION FREQUENCY
A41-V30-100
Patch Antenna 698-960 // 1710-2700 MHz
CERTIFICATION BAND SUPPORT
FCC, CE 1/3/5/7/8/20/2/4/5/12/13/28
DONOR SERVER
3
Additional Cel-Fi Antenna options are available at www.cel-.com/antennas
IN THE BOX
IN THE MOBILE KIT
External Magnetic
Mount (Mag Mount)
Antenna
(used as the donor)
Power
Supply
Interior
Patch Server
Antenna
Main Unit
Included in the Mobile Kit (MK) version:
Cel-Fi GO M
Quick Start Guide
Smart Signal Booster
™
Cel-Fi GO M Smart Signal Booster
Place the Donor Antenna on the vehicle. Make sure you consider the
entire system and required cable lengths.
TIPS AND TECHNIQUES
• Install antenna at least 12 inches from any other antennas
for best performance
• Antenna should be free of obstructions
• Antenna should be away from windows (including sunroof
or other openings)
• Install 8 inches away from any people
• For best performance make sure there is 50cm of metal
around th e base of the antenna.
Install Server Antenna in the cab where coverage is needed.
TIPS AND TECHNIQUES
• For best results, install Donor and Server Antennas such
that there is substantial material between the antennas.
This will create isolation and allow the system to perform at
higher gain without oscillation or feedback.
• Keep Donor and Server Antennas separated/isolated from
each other for best performance.
• The power supply may not be NEMA 4 rated.
DONOR ANTENNA
Install Donor Antenna
I
Install Server Antenna
2
SERVER ANTENNA
DONOR ANTENNA
4
Connect Donor & Server Antennas
to the Cel-Fi GO M Unit
3
Mount Cel-Fi GO M
Find a good mounting location
in your vehicle. Location should
have airow (for cooling) and
be secure from contact with
external objects.
Make sure the unit is within
cable range of the 12V power
supply on your vehicle.
Best to make sure all cable
lengths support the intended
mounting location BEFORE
permanent mounting.
CEL-FI GO
Specifications:
Frequency Support Multiple variations of the product are available with
different frequency support.
Model:
G32-2/4/5/12/13M
Band Name Downlink Uplink
2 1900 PCS 1930 1990 1850 1910
4 AWS-1 2110 2155 1710 1755
5 850 869 894 824 849
12 700 a 729 746 699 716
13 700 c 746 756 777 787
Model:
G32-1/3/5/7/8/20M
Band Name Downlink Uplink
1 2100 2110 2170 1920 1980
3 1800+ 1805 1880 1710 1785
5 850 869 894 824 849
7 2600 2620 2690 2500 2570
8 900 925 960 880 915
20 800 DD 791 821 832 862
Dimensions
272.5 mm 96.5 mm 43.5 mm 850 g
Length Width Height Weight
Gain Up to 65dB system gain
Environmental Operating Temp: 0 - 65C
Relative Humidity: 95%
Power 10dBm/5MHz (16dBm per band)
Antenna Connectors SMA-Female
Certications 3GPP TS 25.143 Rel.10
(All variants) 3GPP TS 36.143 Rel.10
RoHS 2
BQB (Bluetooth)
NEMA-4
(G32-2/4/5/12/13 FCC
variants only) ISED
(G32-1/3/5/7/8/20 IEC 62368-1:2004
variants only) EN 301 489-1 v2.1.1
EN 301 489-17 v3.1.1
EN 301 489-23 v1.5.1
EN 301 908-1 v11.1.1
EN 301 908-11 v11.1.1
EN 301 908-15 v11.1.1
EN 300 328 v2.1.1
EN 62311 (2008)
Regulation (EC) 1275/2008 (Standby and Off mode)
Regulation (EC) 278/2009 (External Power Supply)
Cel-Fi GO M Installation
DONOR ANTENNA
SERVER ANTENNA
DONOR ANTENNA
CEL-FI GO
SERVER ANTENNA
DO NOT plug in at this time.
DONOR ANTENNA
5
Plug in Cel-Fi GO M
12V POWER SUPPLY
SERVER ANTENNA
CEL-FI GO
Cel-Fi GO M Smart Signal Booster www.cel-.com
Loading...