Celestron reTRACE 44850, reTRACE 44851, reTRACE Lite 44850, reTRACE Lite 44851 Instruction Manual

ENGLISH

INSTRUCTION MANUAL

MODEL 44850 / 44851

Know your reTrace Lite

5

9

10

1

2

11

6

7

8

13

1. Scroll Key

2. Change Settings Key

3. Power Key

4. Set Key

5. Battery Status Icon

6. Directional Arrows (360°: 16 points)

7. Digital Compass Icon

8. Waypoint Icons

- Personal

- Favorite

- Attractions

- Target

- Parking

9. Latitude and Longitude

10. Satellite Locked Icon

11. Degree (Azimuth) Icon

12. Digital Readout (distance or compass heading)

13. Units of Measure: Yard, Mile, Meter, Kilometer

Icons Defined

3

LOW BATTERY VERY LOW BATTERY

When the battery is at ‘very low’ setting, the icon will blink
every ½ second and will continue until you have 1 minute
before the power is completely drained and the unit will
turn off.

Satellite Lock Icon

When the icon is blinking, the unit is attempting to lock onto a
satellite. When it stops blinking, the satellite is locked in.

Latitude and Longitude Display

If there is no satellite fix, the screen will display as a series of
dashes. How to read: Top line is the Latitude reading.
If “–“precedes the numbers , it is read as South. Bottom
line is Longitude reading. If “–” precedes the numbers,
it is read as West.

Distance & Azimuth (degrees)

Maximum distance is up to 999 miles.

Battery Icon:

2/3 BATTERY = 2.2V~1.8V

FULL BATTERY 2/3 BATTERY

Units of Measure

Yard, mile, meter, kilometer. To change the units of measure
from English (Yards/Miles) to Metric (Meters/Kilometers), press
the ‘Change Settings’ key while in one of the Waypoint modes
(will not work in Compass mode). The units displayed will
automatically switch back and forth each time you press the
‘Change Settings’ key. The distance will display up to 999 miles
or 999 kilometers maximum, depending on your setting choice.