Celestron Cosmos User Manual [it]

BINOCULARS | JUMELLE
BINOCULARES | FERNGLAS BINOCOLI
ENGLISH ......................................................2
FRANÇAIS ....................................................12
ESPAÑOL .....................................................22
DEUTSCH ..................................................... 32
ITALIANO .....................................................42
Thank you for purchasing Celestron COSMOS™ Tree of Life binoculars. COSMOS™ introduced us to the abundant, natural beauty of the universe we live in. We hope that these binoculars help you continue to discover your world.
There’s no better way to appreciate nature, wildlife, or landscapes than with a pair of binoculars. We can view subtle details, like the petals of wildflowers, or massive geological features like the jagged edges of a distant mountain. Binoculars also help us observe the behavior of wildlife from a safe distance, without disturbing the animals. With your Tree of Life binoculars, you can study birds, deer, insects, reptiles, and more. Try taking your binoculars out at night to reveal unseen details in the night sky, craters on the Moon and the Orion Nebula.
Get ready to see a new world impossible to discern with the naked eye. Your explorations begin now!
English
celestron cosmos™ tree of life Binoculars
Eyepiece
Rainguard
Objective Lens Caps
WARN ING: Viewing the Sun may cause permanent eye damage. Do not
view the Sun with your binoculars or even with the naked eye.
2 I English
Diopter
Adjustment
Objective
Lens
Eyecup
Focus Wheel
Fig. 1
Logo Plate / Tripod Adapter Thread (42 mm only)
adjusting the interpupillary distance (ipd)
The interpupillary distance, or the distance between the pupils, varies from person to person. The binocular must be correctly aligned (adjusted) to the distance between your pupils to achieve a single, clear image. To adjust this distance, lift the binocular up to your eyes (using both hands) and look through them at an object in the distance. Move the two barrels (halves) of the binocular closer together or further apart until you see a single, clear image (Fig. 2). Check that the interpupillary distance is set correctly every time you use your binocular.
Fig. 2
English I 3
setting the diopter / focusing
To ensure a crisp, sharp image the focusing system of the binocular must be set to compensate for any differences in your eyesight. This is achieved by setting the diopter (located on the right eyepiece) before use. To set the binocular to your eyesight follow the instructions below.
1. View an object in the distance through the binocular.
2. Cover the right objective lens with your hand or the objective lens cap.
3. Rotate the focus wheel until the image viewed with your left eye is clear and sharp.
4. Cover the left objective lens with your hand or objective lens cap.
5. Viewing the same object, adjust the diopter ring until the image viewed with your right eye is clear and sharp.
4 I English
6. Your binocular is now adjusted to your eyes and focusing on any object can now be achieved by simply turning the focus wheel.
TIp: Eyeglasses worn for nearsightedness should be worn when using
binoculars as you may not be able to obtain focus at infinity without them.
Diopter
Adjustment
Ring
Focus Wheel
Fig. 3
eyecup adjustment
The COSMOS™ Tree of Life feature twist-up eyecups to accommodate both eyeglass and non-eyeglass wearers. If you do not wear eyeglasses, twist the eyecups counterclockwise until they reach the up position. If you wear eyeglasses, make sure that the eyecups are in the down position to obtain the maximum field of view. The eyecups can be set at positions between fully up and down which may suit some users better.
Fig. 4
English I 5
tripod adaptaBility
The 42 mm version of the COSMOS™ Tree of Life binocular features built-in threads that allow the binocular to be attached to a tripod using a binocular tripod adapter. These threads can be accessed by unscrewing the logo plate found on the front of the hinge (Fig. 5). To attach the binocular to a tripod, thread the adapter into the binocular and attach the other end of the adapter to a photographic tripod.
Waterproof / fogproof
The COSMOS™ Tree of Life binoculars are waterproof and filled with dry nitrogen gas to prevent the housing from fogging internally.
6 I English
Mounting the binocular on a tripod allows for added stability and comfort during prolonged viewing.
Fig. 5
care and storage
Your Celestron binocular will provide you years of dependable service if it is cared for and stored properly.
1. Protect the binocular from impact and do not force any of the moving parts beyond their limits.
2. Protect the optics of your binocular by putting on all lens caps when not in use.
3. Store your binocular in a cool, dry place whenever possible.
4. When storing for an extended period of time, place the binocular in a plastic bag or airtight container with a desiccant.
5. Do not leave the binocular in a car on a hot/ sunny day or near anything that generates heat as this may cause damage.
6. Clean any dust, dirt or water that may get on the binocular or inside moving parts as soon as possible to prevent any unforeseen damage.
English I 7
cleaning
Proper cleaning of the lenses is essential to maintaining the optical integrity of your binocular. Dirty lenses diminish the amount of light transmitted through the binocular and your overall viewing experience.
1. Remove any dust on the lenses with a soft lens brush or can of pressurized air.
2. Remove any fingerprints, stains or smudges from the lens surface with a soft, clean lens
service and repair
If warranty problems arise or repairs are necessary, contact the Celestron customer service department if you live in the United States or Canada. If you live outside of these countries, please contact the dealer you
8 I English
cloth or lens tissue by rubbing in a circular motion. Start in the middle of the lens and work your way to the edges. Breathe lightly on the lens to provide moisture if needed.
3. For a more thorough cleaning we recommend the use of a lens/optics cleaning kit available at most photo or optical shops. Follow the directions supplied with the cleaning kit for best results.
purchased your binocular from or the Celestron distributor in your country. A list of our distributors can be found on our website, www.celestron.com
Warranty
Your binocular is covered under the Celestron Limited Lifetime Warranty. Celestron warrants these binoculars to be free from defects in materials and workmanship for the binoculars’ usable lifetime to the original owner. Celestron will repair or replace the binoculars which, upon inspection by Celestron, are found to be defective in materials or workmanship and within the definitions of the limits described below.
This warranty does not cover products that have been subject to abuse, misuse, physically damaged, altered, or had unauthorized repairs or modifications. This warranty does not cover defects due to normal wear and tear and other conditions.
This warranty is valid to U.S.A. and Canadian customers who have purchased their binocular from an authorized Celestron dealer in the
U.S.A. or Canada. For products purchased outside of the U.S.A. or Canada please contact your local Celestron Distributor or authorized Dealer for applicable warranty information. Additional warranty information and eligibility details can be found on the Celestron website.
This product is designed and intended for use by those 14 years of age and older.
Product design and specifications are subject to change without prior notification.
For complete specifications and product information:
www.celestron.com
2835 Columbia Street • Torrance, CA 90503 U.S.A Tel: 800.421.9649
English I 9
Bienvenue
Merci d’avoir acheté les jumelles Cosmos Tree of Life de Celestron. Cosmos nous a fait découvrir la beauté naturelle et abondante de l’univers où nous vivons. Nous espérons que ces jumelles vous permettront de continuer à découvrir votre univers.
Il n’y a pas de meilleure façon d’apprécier la nature, la faune ou les paysages qu’avec des jumelles. Nous pouvons observer des détails subtils, comme les pétales de fleurs sauvages, ou des caractéristiques géologiques d’envergure comme les contours irréguliers d’une montagne lointaine. Les jumelles nous aident également à observer à bonne distance le comportement de la faune, sans déranger les animaux. Avec vos jumelles Tree of Life (signifiant Arbre de vie), vous pouvez étudier les oiseaux, cerfs, insectes, reptiles et plus encore. Essayez de prendre vos jumelles de nuit pour déceler des détails invisibles dans le ciel nocturne, des cratères sur la lune et la nébuleuse d’Orion.
Préparez-vous à observer un nouveau monde imperceptible à l’œil nu. Vos explorations commencent dès maintenant!
FRAnÇAis
jumelles cosmos™ de celestron
Oculaire lentille capuchon
Objectif lentille capuchon
AVERTISSEMENT: Ne jamais regarder le soleil pendant l’utilisation de
vos jumelles. Regarder vers le soleil peut causer des lésions oculaires permanentes.
12 I FRAnÇAis
Réglage
Dioptrique
Objectif
lentille
Oculaire
Œilleton
Concentrez­roues
Fig. 1
Plaque de logo / Adaptateur de trépied filetage (42 mm seulement)
rÉglage de l’Écart interpupillaire
L’écart interpupillaire, ou la distance entre les pupilles, varie d’une personne à l’autre. Les jumelles doivent être correctement alignées (ajusté) à la distance entre vos pupilles afin de créer une seule image claire. Pour régler cette distance, soulevez les jumelles jusqu’à vos yeux (en utilisant les deux mains) et regardez à travers eux un objet distant. Déplacez les deux barillets (moitiés) des jumelles le plus près possible ou éloigné jusqu’à ce que vous voyiez une seule image claire (Fig. 2). Vérifiez que l’écart interpupillaire soit défini correctement chaque fois que vous utilisez vos jumelles.
Fig. 2
FRAnÇAis I 13
rÉglage du dioptre/focalisation
Afin d’assurer une image nette, le système de focalisation de jumelles doit être réglé pour compenser les différences éventuelles de votre vision. Ceci est réalisé en réglant le dioptre (situé sur l’oculaire droit) avant utilisation. Pour régler les jumelles à votre vision, suivez les instructions ci-dessous.
1. Visualisez un objet distant à travers les jumelles.
2. Couvrez la lentille droite avec votre main ou le capuchon d’objectif.
3. Tournez la molette de focalisation jusqu’à ce que l’image avec votre œil gauche soit claire et nette.
4. Couvrez la lentille gauche avec votre main ou le capuchon d’objectif.
5. Visualisez le même objet, ajustez la bague de réglage dioptrique
14 I FRAnÇAis
jusqu’à ce que l’image avec votre œil droit soit claire et nette.
6. Les jumelles sont maintenant réglé pour vos yeux et la focalisation de n’importe quel objet peut maintenant être obtenue en tournant simplement la molette de focalisation.
ASTucE: Les lunettes de vision pour la myopie devraient être portées lors
de l’utilisation de jumelles puisque vous ne pourrez peut-être pas être en mesure d’obtenir la mise au point à l’infini sans celles-ci.
Bague de réglage
dioptrique
Molette de focalisation
Fig. 3
Loading...
+ 36 hidden pages