Cecilware FE75N, FE300, FE200, CL200, CL100N User Manual

...

Coffee Urns

FE75N, FE100N, FE200, FE300,

CL75N, CL100N, CL200 Series

Operator Manual

Grindmaster-Cecilware

4003 Collins Lane, Louisville, KY 40245 USA Phone: 502.425.4776 Toll Free: 800.695.4500 Fax: 502.425.4664 Web: gmcw.com Email: info@gmcw.com

Safety Information..................2

Rough-In Drawings .................3

Electrical Speciﬁcations...........5

Installation...............................5

Priming ....................................6

Operation ................................6

Cleaning...................................7

Adjustments ............................7

Maintenance ...........................9

Parts Diagram........................12

Parts List.................................15

Wiring Diagram.....................16

Thank you for purchasing this quality urn. For your safety and the safety of others, read all warnings and the operator manual before installing or using the product. Properly instruct all operators. Keep training records. For future reference, record serial number here:

Table of Contents

Printed in USA

0516 Form # CW-326-01

Part # 390-00070

Grindmaster-Cecilware provides the industry’s BEST warranty. Visit gmcw.com for warranty terms and conditions.

Model FE300

Model CL100N

GB Series Cecilware

For safe and proper operation, the appliance must be placed in a stable, vertical position.

To reduce risk of serious burns or scalding, do not place hand or other body parts under dispenser or container while product is brewing.

Always unplug unit from power supply before servicing.

Hot liquid in brew basket could cause burns. Remove with care.

Surfaces are hot and can cause burns.

CAUTION

To reduce risk of electrical shock, do not remove or open cover. No user-serviceable parts inside. Repair should be done by authorized service personnel only.

The appliance is not intended for outdoor use.

Do not clean with pressurized water or use in an area where pressurized water may be used.

Cleaning and maintenance shall be made only by properly trained persons with supervision.

This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Do not alter or deform the power cord or plug in any way! Altering or deforming the plug may cause electrical shock, damage unit and will void warranty.

To reduce risk of explosion or ﬁre, do not use near combustibles.

WARNING

Safety Information

2 Cecilware

Coffee Urns

Important Safety Information

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

For your safety and the safety of others, read all warnings and the operator manual before installing or using the product.

DANGER: This term warns the user of imminent hazard that will result in serious injury or death. WARNING: This term refers to a potential hazard or unsafe practice, which could result in serious injury or death. CAUTION: This term refers to a potential hazard or unsafe practice, which could result in minor or moderate

injury. NOTICE: This term refers to information that needs special attention or must be fully understood.

Use only on a circuit that is properly protected and capable of the rated load.

Electronically ground the chassis.

Follow national and local electrical codes.

Do not use extension cord.

This equipment must be installed in compliance with applicable Federal, State, and/or Local plumbing codes having jurisdiction. This product requires an approved back ﬂow prevention water device, such as a double check valve, to be installed between the machine and the water supply.

NOTICE

Coffee Urns Cecilware

Rough-In Drawings

FE75N Single 3 Gallon Urn, Adjustable By-pass, Automatic Agitator, and Solid State Timer

CL75N Single 3 Gallon Urn, Adjustable By-pass, Push-Button Agitator, and Electro-Mechanical Timer

FE100N Twin 3 Gallon Urn, Adjustable By-pass, Automatic Agitator, and Solid State Timer

CL100N Twin 3 Gallon Urn, Adjustable By-pass, Push-Button Agitator, and Electro-Mechanical Timer

29.1

19.3

F O

3.5

NN10A

10.1

2.5

4.0

14.016.0 5.4

29.1

19.3

4.0

28.0

5.4

3.5

NN10A

10.1

2.5

14.0

4 Cecilware

Coffee Urns

Rough-In Drawings (continued)

FE200N Single 6 Gallon Urn, Adjustable By-pass, Automatic Agitator, and Solid State Timer

CL200N Single 6 Gallon Urn, Adjustable By-pass, Push-Button Agitator, and Electro-Mechanical Timer

FE300N Twin 10 Gallon Urn, Adjustable By-pass, Automatic Agitator, and Solid State Timer

31.2

21.2

4.0

3.5

NN10A

10.1

2.5

32.0 5.4

16.0

34.5

23.4

4.0

36.1 5.4

NN10A

3.5

9.1

2.5

18.0

Coffee Urns Cecilware

Installation

Unpacking Instructions

Carefully unpack the machine and inspect immediately for shipping damage. The packaging may contain unattached parts. Your machine was shipped in a carton designed to give it maximum protection in normal handling. It was thoroughly inspected before leaving the factory. In case of damage, contact the shipper, not Grindmaster-Cecilware.

NOTICE: The person installing this appliance is

responsible for ensuring that electric and water connections meet the requirements of the national electric code, national plumbing code, and any local ordinances.

See Rough-in Drawings for approximate dimensions and locations of electric and water input.

Mechanical Installation

NOTICE: Do not turn thermostat on until all

installation instructions have been followed.

1. Inspect unit to see if any damage occurred in shipment.

2. Remove the urn from the packing material. The four legs, faucets, and vent cap drain are packed separately with urn.

3. Install legs by tilting urn on its side and screwing legs into urn leg supports until hand tight.

4. Carefully right unit and install in its permanent location, being sure to leave at least 6" on right side of urn for access to controls. Position urn so that the faucets drip into a drip trough or drain receptacle of some type.

5. Level urn by adjusting legs. Then attach faucets and install vent cap drain.

6. Cover(s) are shipped with knob(s) on inside to prevent damage. Simply unscrew and reverse.

WARNING: ELECTRIC SHOCK HAZARD!

Installation of this appliance should be performed by qualiﬁed service personnel only. Improper installation could result in electrocution.

CAUTION

These urns are heavy pieces of equipment. It is recommended that moving or lifting the unit be done by two people to avoid injury.

MODEL VOLTS KILOWATTS AMPS

1 PHASE 3 PHASE 1 PHASE 3 PHASE

3 WIRE 4 WIRE

FE75N, CL75N

120/240

120/208 5.3 4.5 26 12

FE100N 120/240 6 8 34 20

120/208 8 6 29 17

CL100N 120/240 7 8 29 20

120/208 5.3 6 26 17

FE200N, CL200N 120/240 10 10 42 24

120/208 7.5 7.5 38 22

FE300N

120/240

120/208

11.3

MODEL WIRE SIZE

1 PHASE 3 PHASE

FE75N, CL75N, CL100N (2) 10 AWG + GND

(3) 10 AWG + GND

FE100-N (2) 8 AWG + GND (3) 8 AWG + GND FE200-N, CL200-N (2) 6 AWG + GND (3) 8 AWG + GND FE300-N - (3) 10 AWG + GND

Neutral and Ground Wires # 14 AWG min. Note: Field wiring must be suitable for 75° C. Use copper wire only for power supply connections. GROUNDING: ON ALL URNS, CONNECT A GROUND WIRE TO GROUNDING LUG TO COMPLY WITH LOCAL ELECTRICAL CODES (14 AWG MIN. 75° C)

Recommended Wire Size For Field-Wiring Urns US models only. Consult factory for export model information..

Electrical Speciﬁcations

Information below provided for US models only. Check rating marking on urn nameplate. Consult factory for export model information.

6 Cecilware

Coffee Urns

Water Hook-up

NOTICE:

Urn should be connected to cold water supply

1. The automatic coffee urn is equipped with a ¼"

Flare water inlet ﬁtting which is located on the back of the unit.

2. Provide shut-off valve and union in supply line near

urn.

3. Minimum inlet pressure at urn should be 30 PSI.

4. Maximum inlet pressure recommended at 70 PSI.

5. Copper ﬂex tubing should be used for valve

connections.

6. To ensure pressure at the urn of at least 30 PSI, use

3/8" OD tubing for short runs, 1/2" OD tubing for longer runs, and larger size tubing for unusually long runs. Be sure other appliances will not reduce water pressure excessively.

7. Turn on the water supply line and check for leaks.

NOTE: For the best tasting coffee, add a ﬁltering system to the water supply line to eliminate any taste and/or odor from the water. NOTE: In areas with extremely hard water, a water softener must be installed in order to prevent mineral deposits that could result in malfunctioning of the equipment and in order not to void the warranty.

Electrical Hook-up

NOTICE: This equipment must be installed in compliance

with applicable Federal, State and/or Local electrical codes having jurisdiction. Do not use extension cords. Make sure that the outlet the urn plugs into is grounded.

1. Check rating marking on urn nameplate to be sure

electric lines match voltage, phase, and amperage requirements of urn. Select the proper cord and cord grip for electrical rating of the urn.

2. Urn body MUST be grounded. A grounding

terminal is provided for this purpose.

3. Use only copper wire to connect this urn.

NOTE: THERMOSTAT MUST BE IN THE "OFF" POSITION.

1. Open water supply line valve to urn.

2. Turn on or plug in the power supply to the urn. Water compartment will begin to ﬁll automatically. Do not power up the urn when the water line is off.

3. Wait until water is visible in center gauge glass (lefthand gauge glass on 3-gallon single urns). Then turn thermostat knob to 10; thermostat pilot light shows heater is on. Urn jacket will continue to ﬁll automatically until water reaches the proper level.

4. When indicator on dial thermometer approaches the "W" in BREW zone, 195°F (92°C), urn is ready to brew coffee.

5. In high altitude locations (over 5000 ft. above sea level), thermostat may have to be lowered to prevent boiling.

6. Brew and discard at least one batch of water into each liner. Check that the ﬁll level is correct. See the

Adjustments section if changes are needed.

Operation

1. Place ﬁlter paper in brew basket with designated amount of coffee grounds. Coffee experts recommend from 6 to 10 ounces of coffee per gallon of water. Use fresh urn grind or drip grind coffee spread evenly on ﬁlter for proper extraction. Make certain you have a level bed of coffee. Consult your coffee supplier for exact brewing speciﬁcations.

2. Water should be heated to 195°F (92°C) before brewing coffee.

3. While brewing, leave cover on urn to preserve aroma and prevent excessive steaming. Total contact time for urn grind should be approximately 4-6 minutes. When the brew is ﬁnished, allow one to two minutes for the coffee to drip from the basket.

4. When the drip period is complete, center the spray arm and remove the basket to throw away the grounds. Replace the liner cover to keep the coffee hot. Never pour coffee back through spent grounds.

• Urns with automatic agitator (FE series), blend coffee automatically at end of brewing cycle. Press and hold agitator BLEND switch for additional blending.

• If urn has a manual agitator (CL series), press and hold agitator BLEND switch for 20 seconds after brewing cycle to blend coffee.

5. Coffee is ready to serve.

6. Hold coffee at 185°-190°F (85°-88°C) (about 8 on thermostat). Brewed coffee should not be held for longer than one (1) hour and should never be reheated.

WARNING: ELECTRIC SHOCK HAZARD!

Installation of this appliance should be performed by qualiﬁed service personnel only. Improper installation could result in electrocution.

Installation (continued) Priming

WARNING: ELECTROCUTION HAZARD!

Never use the ground conductor as a neutral. This could cause electrocution.

CAUTION: BURN HAZARD

Water used for brewing coffee is very hot. Use caution when brewing, pouring, or transporting coffee. Accidental spills may result in severe burns. Use caution when disposing grounds.

+ 14 hidden pages

Cecilware FE75N, FE300, FE200, CL200, CL100N User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual