CDVI CDV-91 User Manual

2 -Wire Intercom System

USER MANUAL

Model: CDV-91

-1-

1.Parts and Functions

Rainy Cover

Camera Lens

Night View LED

Speaker

Nameplate

Call Button

Microphone

90 mm

176 mm

23 mm

2.Terminal Descriptions

BUS

PL

S1+ S2+ S-

1 2

ON

12

ON

MIC adjustment

Lock Control Jumper

Doorstation Code DIP

Main Connect Port

1 2 3

SPK adjustment

-2-

•

Lock Control Jumper:

To select the lock type: see 5.2.1 , 5.2.2

•

Door Station Code DIP:

Total 4 door stations can be supported,see 6.1

•

Main Connect Port:

To connect the bus line and the electronic locks.

•BUS: Connect to the bus line, no polarity.

• PL: External lock power input, connect to the power positive(power +).

• S1+, S2+: Lock power(+) output, to connect 2 locks.

• S-: Lock power(-) output, connect to the power(-) input of locks.

3.Specications

Power Supply : DC 24V (supplied by PS1-24V or PS5-24V)

Power Consumption: Standby 50mA; Working status 200mA

Camera: Pinhole Sharp Color CCD; 420 TV Lines

Unlocking time: 1-9S, set by monitor

Lock Power supply: 12Vdc, 300mA(Internal Power)

Temperature: -100C~+450C

Wiring: 2 wires (non-polarity)

Dimension: 176(H)×90(W)×24(D)mm

4.Mounting

4.1 Mounting Without Rainy Cover

160-165cm

1

2

1 2 3 4

-3-

4.2 Mounting With Rainy Cover

160-165cm

1

2

1 2 3 4

4.3 Placing Name Label

Move the plastic cover away to open the transparent name label cover, insert a name paper, then put
the plastic cover back to the panel.

name label

12

ON