CDIDI CD4627, CD4626, CD4625, CD4624, CD4623 Datasheet

...
23 MILS
15 MILS
15 MILS
23 MILS
• 1N4614 THRU 1N4627 AVAILABLE IN JANHC AND JANKC
PER MIL-PRF-19500/435
• ZENER DIODE CHIPS
• ALL JUNCTIONS COMPLETELY PROTECTED WITH SILICON DIOXIDE
• ELECTRICALLY EQUIVALENT TO 1N4614 THRU 1N4627
• 0.5 WATT CAPABILITY WITH PROPER HEAT SINKING
DESIGN DATA
METALLIZATION:
Top: (Anode)......................Al
Back: (Cathode)............. ..Au
AL THICKNESS............25,000
Å Min
GOLD THICKNESS... .....4,000 Å Min
CHIP THICKNESS............. .....10 Mils
CIRCUIT LAYOUT DATA:
For Zener operation, cathode must be operated positive with respect to anode.
TOLERANCES: ALL Dimensions +
2 mils
MAXIMUM RATINGS
Operating Temperatures: -65°C to +175°C Storage Temperatures: -65°C to +175°C Forward Voltage @ 200 mA: 1.5 Volts maximum
ELECTRICAL CHARACTERISTICS @ 25°C, unless otherwise specified.
NOMINAL ZENER MAXIMUM MAXIMUM REVERSE
TYPE ZENER TEST ZENER LEAKAGE CURRENT
NUMBER VOLTAGE CURRENT IMPEDANCE
VZ @ I
ZT
I
ZT
ZZT@ I
ZT
1R@ V
R
(Note 1) (Note 2)
VOLTS
µ
A OHMS
µ
A VOLTS
CD4614 1.8 250 1200 7.5 1 CD4615 2.0 250 1250 5.0 1
CD4616 2.2 250 1300 4.0 1 CD4617 2.4 250 1400 2.0 1
CD4618 2.7 250 1500 1.0 1 CD4619 3.0 250 1600 0.8 1
CD4620 3.3 250 1650 7.5 1.5 CD4621 3.6 250 1700 7.5 2
CD4622 3.9 250 1650 5.0 2 CD4623 4.3 250 1600 4.0 2
CD4624 4.7 250 1550 10.0 3 CD4625 5.1 250 1500 10.0 3
CD4626 5.6 250 1400 10.0 4 CD4627 6.2 250 1200 10.0 5
CD4614
thru
CD4627
BACKSIDE IS CATHODE
FIGURE 1
NOTE 1 Zener voltage range equals nominal Zener voltage + 5% for no suffix types.
Zener voltage is read using a pulse measurement, 10 milliseconds maximum.
"C" suffix = +
2% tolerance and "D" suffix = + 1% tolerance.
NOTE 2 Zener impedance is derived by superimposing on lZTA
60Hz rms a.c. current equal to 10% of lZT.
22 COREY STREET, MELROSE, MASSACHUSETTS 02176 PHONE (781) 665-1071 FAX (781) 665-7379 WEBSITE: http://www.cdi-diodes.com E-mail: mail@cdi-diodes.com
CD4614 thru CD4627
.1 .2 .5 1 2 5 10 20 50 100
OPERATING CURRENT I
ZT (mA)
FIGURE 3
ZENER IMPEDANCE VS. OPERATING CURRENT
ZENER IMPEDANCE ZZT (OHMS)
1000
500 400 300
200
100
50 40
30 20
10
5 4
3 2
1
5.1 VOLT
6.2 VOLT
3.3 VOLT
Loading...