CDA PC50 Manual For Installation, Use And Maintenance

1

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY

T : 01949 862 012 F : 01949 862 003 E : [e-mail] W : www.cda.eu

PC50 American Style Fridge
Freezer

Manual for Installation, Use and Maintenance

2

Important

The CDA Group Ltd cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please

note that CDA reserve the right to invalidate the guarantee supplied with this product following incorrect installation or misuse

of the appliance.

This appliance is not designed to be used by people (including children) with reduced physical, sensorial or mental capacity, or

who lack experience or knowledge about it, unless they have had supervision or instructions on how to use the appliance by

someone who is responsible for their safety.

Under no circumstances should any external covers be removed for servicing or maintenance except by suitably qualified

personnel.

Appliance information:

Please enter the details on the appliance rating plate below for reference, to assist CDA Customer Care in the event of a fault with

your appliance and to register your appliance for guarantee purposes.

Appliance Model

Serial Number

CE Declarations of Conformity:

This appliance has been designed, constructed and marketed in compliance with safety requirements of EEC Directive 2006/95/
EEC (Low voltage) and requirements of EMC Directive 2004/108/EEC.

This appliance has been manufactured to the strictest standards and complies with all applicable legislation, including Electrical

safety (LVD) and Electromagnetic interference compatibility (EMC). Parts intended to come into contact with food conform to

EEC/89/109.4

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE

2002/96/EC.

At the end of its working life, the product must not be disposed of as urban waste. The refrigeration system contains insulating

gases and refrigerants, which require specialised waste disposal. The valuable materials contained in this appliance can be recycle.

It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service.

Before disposing of an old appliance, remove the latch or bolt lock to avoid the risk of child entrapment.

Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving

from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and

resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a crossed-out

wheeled dustbin.

3

Important

• Never store inflammable or explosive items and strong corrosive acids or alkalis in the appliance.

• This is a household appliance, which is produced in accordance with the national standard. It is intended for food storage only,

not for storage of blood, medicine and biological products.

• To prevent risk of fire, keep the appliance away from petrol or any other inflammables.

• To prevent risk of electromagnetic interference or other accidents, do not place a microwave oven on top of the refrigerator

or use any electric appliance inside the refrigerator.

• Do not allow children to play with or near the appliance.

• The internal surface of freezer compartment is very cold when the appliance is running. Do not touch the surface especially

when hands are wet.

• Do not splash water onto the appliance. Keep it away from places of high humidity that may have adverse effect on the

electric insulation performance.

• This appliance is designed to be used in ambient temperatures between 16 and 38˚C. Use outside of this range may cause the

appliance to fail.

In the event of a power failure, leave the door closed as much as possible to maintain the internal working temperature.

Should the power failure continue for a prolonged period, you should take steps to protect the contents of the appliance

against a rise in temperature. The appliance will remember the selected temperature settings and revert to these settings

once the power is restored.

4

Before first use

You must allow the fridge to settle for at least twenty four hours

prior to switching the power on.

It is recommended that you clean the interior of the appliance prior to first

use, using a solution of bicarbonate of soda and warm

water and then thoroughly drying the interior.

The fridge may have an odour to it at first use. This will disappear as the

appliance cools.

Do not load the appliance with food until it reaches the required

temperature

Please note:

The appliance will work continuously until it comes down to the correct

temperature.

If the appliance is switched off, you should allow five minutes before

switching it on again to prevent unnecessary damage to the

compressor.

The fridge and freezer shelves can be moved according to storage

requirements.

To move the shelf, pull the shelf outwards until the shelf stops

(approximately one third out) then lift up the front section slightly and pull

the shelf out. To replace, slide the shelf back into the slot, and then lower the

front section before pushing fully back into position.

fig. 1

5

Use

Fridge

• Never put liquids in the refrigerator uncovered.

• Never put hot foods in the refrigerator. Warm food should be allowed to cool to room temperature before being put into

the refrigerator.

• Nothing should rest against the rear wall of the refrigerator, as this will cause frost and possible condensation problems which

will be difficult to remove.

• Make sure food is clean and any extra water is wiped away before putting into the fridge.

• Wrap or cover food before putting into the fridge. This will help prevent the loss of moisture, keep food fresh and avoid

unpleasant odours.

• Sort foods prior to storing. Any foods to be used soon should be stored at the front of the shelf to prevent deterioration

caused by the door being open for prolonged periods.

• Do not overfill the fridge. There should be sufficient space between the foods to allow the cool air to circulate.

• Thawing frozen foods in the fridge compartment will help to keep the temperature low and save energy.

Freezer

• The freezer compartments are designed to store only frozen food.

• Never put hot or warm foods in the freezer, allow them to cool fully before putting them into the freezer.

• Follow the instructions on the food packaging for storage of frozen food. If no information is provided, foods should not be

stored for more than three months after the purchase date.

• Store food in small packages (ideally less than 2.5kg). This reduces the freezing time and improves the quality of the food

after thawing.

• Wrap food before putting into the freezer. To stop the wrapping sticking together, ensure it is dry.

• Label the food before freezing with information including type of food and dates of storage and expiry.

• Once food is thawed, it must not be refrozen unless it has been completely cooked. Only defrost as much food as is required

to prevent wastage.

• Bottled or canned drinks should not be stored in the freezer compartments as they could explode.

• Check the rating plate to confirm the maximum amount of fresh food that can be frozen within a 24 hour period.

• Do not attempt to freeze more than the maximum amount.

• To freeze fresh food more quickly, switch on the quick freeze function a few hours prior to placing the food in the freezer.

• Do not use the quick freeze function for more than 48 hours. Use over the recommended time will place unnecessary strain

on the refrigeration system..

6

Control panel

Setting the freezer temperature

Touch the freezer temperature key (1). The freezer section and the freezer temperature on the display will flash.

Then touch the freezer temperature key again. The temperature will cycle on the display with each touch of the key
from -16º to -24º before returning to -16º.

Once the required temperature is shown on the display, the freezer temperature will set after five seconds’ delay.

Setting the fridge temperature

Touch the fridge temperature key (2) so that the fridge section and the fridge temperature on the display flash.

Then touch the fridge temperature key again. The temperature will cycle on the display with each touch of the key
from 8º to 2º before returning to 8º.

Once the required temperature is shown on the display, the fridge temperature will set after five seconds’ delay.

Additional modes

The appliance is equipped with a number of additional modes to offer different benefits. These functions are

detailed below and can be selected by touching the mode key (3) until the required symbol shows on the display.

Quick freeze function

The quick freeze function can be used to freeze large quantities of fresh food as quickly as possible. This function can
be set for specific durations before switching off automatically for convenience.

To switch on the quick freeze function, touch the mode key (3) until the quick freeze symbol flashes on the display.

Then touch the OK key (4) within five seconds to confirm the selection. The quick freeze symbol will show on the
display until the quick freeze function switches off and the freezer temperature will be set to -24º. If the OK key is
not touched within five seconds, the freezer will revert to normal operation.

To switch off the quick freeze function, repeat the steps above. Once the function is switched off, the symbol will no

longer show on the display and the appliance will return to the temperatures set previously.

IMPORTANT Do not use the quick freeze function for more than 48 hours

fig. 2

1. Freezer temperature key

2. Fridge temperature key

3. Mode key

4. OK & lock/unlock key

1 2

3 4

7

Quick refrigeration function

The quick refrigeration function can be used to maintain the fridge temperature when large quantities of fresh food

are introduced into the fridge.

To switch on the quick refrigeration function, touch the mode key (3) until the quick refrigeration symbol flashes on

the display. Then touch the OK key (4) within five seconds to confirm the selection. The quick refrigeration symbol
will show on the display until the quick refrigeration function switches off and the fridge temperature will be set to
2º. If the OK key is not touched within five seconds, the fridge will revert to normal operation.

To switch off the quick refrigeration function, repeat the steps above. Once the function is switched off, the symbol

will no longer show on the display and the appliance will return to the temperatures set previously.

Vacation mode

This appliance is equipped with a vacation mode function, which will set the freezer to -15º and the fridge to 7º,
maintaining frozen food during a holiday without requiring the fridge to work to very low temperatures.

To switch on the vacation function, touch the mode key (3) until the vacation symbol flashes on the display. Then

touch the OK key (4) within five seconds to confirm the selection. The vacation symbol will show on the display
until the vacation function switches off and the fridge and freezer temperatures will be set to 7º and -15º. If the OK
key is not touched within five seconds, the appliance will revert to normal operation.

To switch off the vacation function, repeat the steps above. Once the function is switched off, the symbol will no

longer show on the display and the appliance will return to the temperatures set previously.

Energy saving mode

At first switch on, the fridge will work in energy saving mode, setting the freezer temperature to -18º and the fridge

temperature to 5º, reducing energy consumption.

To switch on the energy saving function, touch the mode key (3) until the energy saving symbol flashes on the

display. Then touch the OK key (4) within five seconds to confirm the selection. The energy saving symbol will show
on the display until the energy saving function switches off and the fridge and freezer temperatures will be set to 5º
and -18º. If the OK key is not touched within five seconds, the appliance will revert to normal operation.

To switch off the energy saving function, repeat the steps above. Once the function is switched off, the symbol will

no longer show on the display and the appliance will return to the temperatures set previously.

OK & lock/unlock key

The fridge is equipped with a safety key lock to prevent accidental reprogramming of the fridge. The key lock

switches on automatically one minute after the last key touch or after one minute’s continuous key press.

To switch the safety key lock on or off, touch and hold the OK key (4) for three seconds. When the lock is on, the

display will show the lock symbol.

Please note:

The centre of the control panel display shows an animation when the compressor is running, or static when the compressor is not
running. This is normal and does not constitute a fault.

8

Installation And Ventilation

This appliance must never be installed close to heat sources i.e.

heating elements, cookers or in damp places

Failure to provide adequate ventilation can lead to increased running

costs and premature failure and may invalidate the warranty provided

with the product.

• Ensure ventilation openings are kept clear.

• Do not use a multi-purpose socket alongside other appliances.

• Do not tilt the fridge beyond 45º

• Do not exert excessive pressure on the appliance.

• Place the refrigerator in a well-ventilated position, away from heat

sources, damp and direct sunlight.

• Ensure that a gap of no less than 30cm is left above the appliance

and that the gap around the outside is no less than 10cm.

fig. 3

750

1760

902

9

Care and cleaning

IMPORTANT: Turn off the ice maker using the ice off key on the control panel before removing the ice compartment

for cleaning.

Always disconnect the appliance from the power before any cleaning or maintenance.

• The refrigerator and freezer sections should be cleaned using a solution of bicarbonate of soda and lukewarm water.

• Do not use abrasive products or detergents. After washing, rinse and dry thoroughly.

• Clean the shelves and balconies separately by hand using soap and water. Do not put them in the dishwasher.

• The evaporating tray and water drain hole (at the back of the refrigerator compartment) should be cleaned periodically to

prevent the defrosted water from collecting inside the refrigerator compartment. The drainplug can be used to clear the

drain hole.

• Once cleaning is complete, then reconnect the power.

• If the appliance is not used for prolonged periods of time, unplug and clean the appliance. The doors should be left

slightly open to prevent the formation of mildew and smell.

This appliance must never be installed close to heat sources, e.g. heating elements, cookers or in damp places.

• The plug should be fully accessible at all times.

• To ensure the appliance is level, you should use the height adjustable feet at the front of the appliance.

• The cooling system at the rear of the appliance must not touch the rear wall.

• The appliance must be installed with adequate ventilation. Ensure that there is 15 cm clearance above the appliance, and that

there is space between the rear of the appliance and the wall.

10

Troubleshooting

If you have any problems with your appliance, you should check the troubleshooting prior to calling CDA Customer Care to

prevent unnecessary service calls and potential cost.

If the appliance is not working

• Check there is power to the appliance:

• The house fuses are intact and the fuse in the plug has not blown.

• The plug socket is functioning fine. To check this, plug another electrical appliance in to see if the socket is working.

The appliance is working, but not very well

• The appliance is not overloaded

• The thermostat is set to an appropriate temperature

• The doors are closing properly

• The cooling system at the rear of the appliance is clean and free of dust, and not touching the rear wall.

• There is enough ventilation at the side and rear walls

The appliance is noisy

• The appliance is level and stable

• The side and rear walls are clear, and there is nothing resting on the appliance

• The cooling gas in the refrigerator will make a slight bubbling noise, even when the compressor is not running.

• It is normal for the ice and water dispenser to make noise during the ice making process and dispensing. This does not

constitute a fault.

There is water in the lower part of the refrigerator compartment

• The drain hole in the channel at the back of the compartment is clear

Please note:

The LED lighting cannot be replaced without a service call. If the light fails, contact CDA Customer Care.

In the event of a power cut lasting longer than one hour, the ice cubes in the ice compartment may start to defrost. When the

power returns, the ice may refreeze together which could damage the ice system. To prevent this, remove the ice in the ice

compartment in the event of a power failure.

11

Electrical information

Warning! This appliance must be earthed.

The mains lead of this appliance has been fitted with a BS 1363A 13 amp fused plug. To change a fuse in this type of plug,

follow the steps below:

1. Remove the fuse cover and fuse.

2. Fit replacement 13A fuse, ASTA approved to BS 1362 type, into the fuse cover.

3. Replace fuse cover.

Important: Do not use the appliance without the fuse cover in position.

How to connect an alternative plug

If the fitted plug is not suitable for your socket outlet, then it should be cut off and disposed of safely to avoid possible

shock hazard. A suitable alternative plug of at least 13 Amp rating to BS 1363 should be used.

As the colours of the wires in the mains lead of this appliance may not correspond with the

coloured markings identifying the terminals in your plug, proceed as follows:-

• The wire which is coloured GREEN and YELLOW must be connected to the terminal which is marked with letter (E) or

by the Earth symbol

or coloured GREEN and YELLOW.

• The wire which is coloured BLUE must be connected to the terminal which is marked with the letter (N), or

coloured BLACK.

• The wire which is coloured BROWN must be connected to the terminal which is marked with the letter (L) or

coloured RED.

If in doubt regarding the electrical connection of this appliance, consult a qualified electrician. Do not shorten the

supply cable, the appliance may require removing for servicing.

N.B. Ensure that the plug socket is situated in an easily accessible place.

If the power supply cord is damaged, it must replaced by a CDA authorised agent.

12

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY

T : 01949 862 012 F : 01949 862 003 E : [e-mail] W : www.cda.eu

To contact our Customer Care Department, or for Service,

please contact us on the details below.