C.B.S. Scientific ACGT-27940 User Manual

Continuously Adjustable Gel Casters

ACGT-16520
ACGT-21826
ACGT-27940

INSTRUCTION MANUAL

1.1 General Information

3 different sizes of these versatile Adjustable Gel Casters are available to t our complete
line of horizontal gel trays. These Casters can also be used to t any other vendors gel
trays within the limits of each size. Please refer to the chart on the reverse side to see the
dimensions and number of gel trays each caster can hold. The gel tray is sandwiched
between 2 rubber gaskets using an adjustable gate that can be locked into place using
nger cams. A convenient cutout on the base can be used to carry the caster or to hang it
when not in use.

1.2 Unpacking and Components

Please verify that your unit comes complete with the following components:

Continuously Adjustable Gel Casters

AGCT-16520, AGCT-21826, AGCT-27940

Complete System

• Adjustable caster with leveling base and cut-out for handling
and storage

• 2 rubber gaskets

• Replacement gaskets, set of 2

• Single (AGCT-16520) or dual (AGCT-21826 or AGCT-27940)
nger cams

1.3 Instructions for Use

1. With cam levers in horizon-

tal position slide adjustable
gate far enough away from
stationary gasket to t your
gel tray(s).

2. Place gel tray in position
against stationary gasket as
shown at right.

2

Continuously Adjustable Gel Casters 10-23-13