CatEye HL-EL462RC-H operation manual

HL-EL462RC-H

Manual

Before using the light, read this
manual thoroughly and keep it for
future reference.

ENG

Before Initial Use

This unit is shipped
with a small charge
to check the light. Be
sure to charge it before
use, according to the
instructions “HOW TO
CHARGE”.

Light unit

Taillight integrated
cartridge battery
(BA-2.6-R)

Helmet mountUSB cable

(MICRO USB)

Copyright© 2017 CATEYE Co., Ltd.
EL462RCH-171211 2

WARNING!!!

• Be sure to direct the light beam downward so
the driver approaching does not get dazzled.

• Before your trip, please make sure the light is
firmly mounted to the bracket and it lights up.

• Always attention to the remaining battery
power by checking the indicator periodically
while using.

CAUTION!

• Do not place it within children’s reach.

• In preparation for unexpected battery shutoff,
we recommend you carry a spare cartridge
battery and light.

• This product is water-resistant under normal
daily use and can be used in the rain. Howev­er, do not intentionally submerge it in water.

• If the light unit or parts become dirty with
mud, etc., clean with a soft cloth which is
moistened with mild soap. Never apply paint
thinner, benzine or alcohol; damage will
result.

LITHIUM-ION BATTERIES

Cautions on recharging

• Avoid charging in direct sunlight or in a
vehicle parked under direct sunlight, and
make sure to charge only when the ambient
temperature is between 41°F and 104 °F
(5 and 40°C).

• Before charging, be sure that no dust or
other foreign objects attach to the USB
plug.

• Do not subject the light to vibrations while
charging.

• Once charging is complete, be sure to
disconnect the USB plug.

Cautions in use

• Charging, discharging, and storing in high
temperatures will cause the rechargeable
battery to deteriorate faster. Do not place
the light inside a vehicle or near a heater.

• When the operating time decreases signifi­cantly, the battery life is close to an end.
Replace the cartridge battery with a new one.

Cautions on storage

• Cool and dry storage is recommended.
For long period storage, it is important
to charge the battery 30 minutes every 6
months.

• When you store the cartridge battery alone,
be sure to install the cap. Otherwise, dam
age or a fire may be caused by short circuit.

Cautions for dispose

Dispose of used cartridge batteries appropri­ately according to local regulations.

-

1 HOW TO CHARGE

USB cable

2

1

Standard charging time

Approx. 6 h

1. Connect the light unit to your PC or a com­mercial USB battery charger using the USB

cable. (Fig 1
The switch indicator turns on and charging
starts.

Indicator light:
Illuminated in red
Indicator light: Off

* When your PC is in sleep state, the unit can-

not be charged.

1

– 2).

To PC or USB
battery charger

Charge jack cover

(

USB 2.0

)

Charging

Charging is completed

2 HOW TO MOUNT TO A HELMET

B

1

A

1.

Securely fasten the helmet mount to the front
part of the helmet, wrapping the bracket strap
through the air vents on the helmet. (Fig 2

A

The bracket strap can be attached
either vertically or horizontally.

2. Mount the light unit onto the helmet mount.

)

(

2

Bracket strap

)

1

Optional

Charging on the cradle

Cartridge battery

Fast charging cradle 2

IN OUT

OUT

OUT

IN

MICRO USB USB

* We recommend using 500+mAH (USB2.0)

USB battery charger.

* If using the Fast charging cradle2 (optional),

the indicator on the cradle turns on.

2. After charging is completed, remove the USB
cable, and install the charge jack cover.

* Charging and lighting times are approximate

values, and will vary by environmental and
user conditions.

* The optional cradle2 not only lets you charge

the battery by itself, but also gives you the
option of using it as a mobile battery.

2

3

3. Wear the helmet and adjust the angle of the
beam. (

)

3

4. To remove the light unit, pull out it forward
while pressing down on the release button

(

).

4

CAUTION!:
Check the screw on the bracket periodically,
and use it without any loosing. (

OUT

Light unit

Remove

Release button

B

OUT

IN

4

)

3 SWITCH OPERATION (SWITCHING THE LIGHTING MODE

CO

., LTD.

)

Press the switch on the light unit or on the cartridge battery to turn the light on/off or to select the lighting mode.

When you turn the light on, it lights up in the last lighting mode you used. (Mode memory function)

C

FRONT

Switch

(indicator)

OFF

Press and hold

ON

Approx.

10 h

Approx.

18 h

Approx.

9 h

Press and

C

Middle

Low HyperConstant

hold

REAR

Switch

(Red lens)

OFF

High

Double-click

Click

Press and

hold

C

Click

ON

C

Approx.

3 h

High Flashing

Approx.

25 h

Click

Constant Flashing

Remaining battery capacity

When the switch (indicator) lights up, there is little remaining battery power. Please charge as soon as possible.

HOW TO REPLACE THE CARTRIDGE

4

BATTER

Turn the cartridge battery counterclockwise to remove from the unit.
To install, screw the cartridge battery into the light unit until it clicks.

Remove Install

Cartridge battery

SPARE / OPTIONAL PARTS

5341831N

Helmet mount

5342730

USB cable

5342720

Fast charging cradle
(USB cable attached)

(CRA-001)(MICRO USB)

SPECIFICATIONS

Light source High-intensity LED x 1
Cartridge battery BA-2.6-R : Li-ion 3.6v 2600 mAH
Charge Micro USB plug
Operating time * Average runtime at 20˚C.

FRONT High : Approx. 3 hours

REAR Constant : Approx. 25 hours

FRONT / REAR High / Constant : Approx. 3 hours

Standard charging time Approx. 6 hours (USB2.0)

Temperature range

Recharge/discharge
number of times

Dimensions/weight

* The specifications and design are subject to change without notice.

Middle : Approx. 10 hours
Low : Approx. 18 hours
HyperConstant : Approx. 9 hours
Flashing : Approx. 150 hours
* When the rear light is turned off.

Flashing : Approx. 250 hours
* When the front light is turned off.

Flashing / Constant : Approx. 30 hours
* When both lights are turned on.

Charging : 41˚F – 104˚F (5˚C – 40˚C)
Operating : 14˚F – 104˚F (-10˚C – 40˚C)

About 300 times
(until the rated capacity drops to 70%)

4-63/64” x 1-43/64” x 1-15/64” (127 x 42.5 x 31 mm) / 3.83 oz
(108.5 g) (Including the cartridge battery)

LIMITED WARRANTY

5342620

Fast charging cradle 2
(USB cable attached)

(CRA-002)

5342681

Cartridge battery
(Li-ion3.6v 3400mAH)

5342890

Taillight integrated
cartridge battery
(Li-ion3.6v 2600mAH)

(BA-2.6-R)

5342710

Cartridge battery
(Li-ion3.6v 2200mAH)

(BA-2.2)(BA-3.4)

2-year Warranty: Light unit only
(Deterioration of the cartridge battery is out of warranty)

CatEye products are warranted to be free of defects from materials and workmanship for
a period of 2 years from original purchase. If the product fails to work during normal use,
CatEye will repair or replace the defect at no charge. Service must be performed by CatEye
or an authorized retailer. To return the product, pack it carefully and enclose the warranty
certificate (proof of purchase) with instruction for repair. Please write or type your name
and address clearly on the warranty certificate. Insurance, handling and transportation
charges to CatEye shall be borne by person desiring service.
For UK and REPUBLIC OF IRELAND consumers, please return to the place of purchase.
This does not affect your statutory rights.

2-8-25, Kuwazu, Higashi Sumiyoshi-ku,
Osaka 546-0041 Japan
Attn: CATEYE Customer Service Section
Phone : [phone]
Fax : [phone]
E-mail : [e-mail]
URL : http://www.cateye.com

[For US Customers]
CATEYE AMERICA, INC.

2825 Wilderness Place Suite 1200, Boulder CO 80301-5494 USA
Phone : [phone]
Toll Free : 800.5CATEYE
Fax : [phone]
E-mail : [e-mail]

Approx.

Approx.

150 h

250 h