How it Works
Cat
Loading...
317 GC
Table of contents
Loading...

Cat 317 GC Technical Specifications

317 GC
Hydraulic Excavator
Technical Specifications
Congurations and features may vary by region. Please consult your Cat® dealer for availability in your area.

Table of Contents

Specications ..............................................................................................2
Standard and Optional Equipment ...........................................................................25
Dealer Installed Kits and Attachments .......................................................................27
317 GC Hydraulic Excavator Specifications

Engine

Engine Model Cat® C3.6
Net Power – ISO 9249 89 kW 119 hp
Engine Power – ISO 14396 90 kW 121 hp
Bore 98 mm 4 in
Stroke 120 mm 5 in
Displacement 3.6 L 220 in
• Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
• No engine power derate required below 3000 m (9,840 ft) altitude.
• Advertised power is tested per the standard shown in effect at the time of manufacture.
• Net power advertised is the power available at the ywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
• Engine speed at 2,400 rpm.
3

Swing Mechanism

Swing Speed 8.7 rpm
Maximum Swing Torque 61 kN·m 44,990 lbf-ft

Weights

Operating Weight 17 200 kg 38,000 lb
• Long undercarriage, Reach boom, R3.1 (10'2") stick, GD 0.76 m (0.99 yd3) bucket, 600 mm (24") triple grouser shoes and 3.05 mt (6,720 lb) counterweight.

Track

Standard Track Shoes Width 600 mm 24 in
Optional Track Shoes Width 700 mm 28 in
Number of Shoes (each side) 44
Number of Track Rollers (each side) 7
Number of Carrier Rollers (each side) 2

Drive

Gradeability 35°/70%
Maximum Travel Speed 5.3 km/h 3.3 mph
Maximum Drawbar Pull – LongUndercarriage
157 kN 35,295 lbf

Hydraulic System

Main System – Maximum Flow – Implement
Maximum Pressure – Equipment 35 000 kPa 5,075 psi
Maximum Pressure – Travel 35 000 kPa 5,075 psi
Maximum Pressure – Swing 25 800 kPa 3,741 psi
Boom Cylinder – Bore 110 mm 4.3 in
Boom Cylinder – Stroke 1193 mm 47.0 in
Stick Cylinder – Bore 120 mm 4.7 in
Stick Cylinder – Stroke 1331 mm 52.4 in
Bucket Cylinder – Bore 105 mm 4.1 in
Bucket Cylinder – Stroke 1039 mm 40.9 in
296 L/min 78 gal/min

Service Refill Capacities

Fuel Tank Capacity 271 L 71.6 gal
Cooling System 22 L 5.8 gal
Engine Oil 11 L 2.9 gal
Final Drive (each) 6 L 1.6 gal
Hydraulic System (including tank) 94 L 24.8 gal
Hydraulic Tank 87 L 23.0 gal
DEF Tank 22 L 5.9 gal
3

Standards

Brakes ISO 10265:2008
Cab/ROPS ISO 12117-2:2008
Cab/FOGS ISO 10262:1998

Sound Performance

ISO 6395 (external) 101 dB(A)
ISO 6396 (inside cab) 70 dB(A)
• When properly installed and maintained, the cab offered by Caterpillar, when tested with doors and windows closed according to ANSI/SAE J1166 OCT98, meets OSHA and MSHArequirements for operator sound exposure limits in effectat time of manufacture.
• Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/ windows open) for extended periods or in a noisy environment.
2

Operating Weights and Ground Pressures

317 GC Hydraulic Excavator Specifications
Base Machine Configurations
600 mm (24")
Triple Grouser Shoes
Ground
Weight
Pressure Weight Weight
600 mm (24")
Rubber Shoe
700 mm (28")
Triple Grouser Shoes
Ground
Pressure
Base machine with 3.05 mt (6,720 lb) Counterweight andLongUndercarriage kg (lb) kPa (psi) kg (lb) kg (lb) kPa (psi)
Reach Boom + R2.6 (8'6") Stick + 0.76 m
Reach Boom + R2.9 m (9'6") Stick + 0.76 m
Reach Boom + R3.1 m (10'2") Stick + 0.76 m
3
(0.99 yd3) GD Bucket
3
(0.99 yd3) GD Bucket
3
(0.99 yd3) GD Bucket
17 200
(37,800)
17 200
(38,000)
17 200
(38,000)
40.6
(5.9)
40.8
(5.9)
40.8
(5.9)
17 500
(38,600)
17 600
(38,800)
17 600
(38,800)
17 400
(38,300)
17 500
(38,500)
17 500
(38,500)
35.3
(5.1)
35.4
(5.1)
35.4
(5.1)
Base machine with 3.57 mt (7,870 lb) Counterweight and Long Undercarriage
Reach Boom + R2.6 (8'6") Stick + 0.76 m
Reach Boom + R2.9 m (9'6") Stick + 0.76 m
Reach Boom + R2.9 m (9'6") Thumb Ready Stick + 0.76 m
Reach Boom + R3.1 m (10'2") Stick + 0.76 m
All operating weights include a 90% fuel tank with 75 kg (165 lb) operator.
3
(0.99 yd3) GD Bucket
3
(0.99 yd3) GD Bucket
3
(0.99yd3) GD Bucket
3
(0.99 yd3) GD Bucket
17 700
(39,000)
17 700
(39,100)
17 800
(39,300)
17 700
(39,100)
41.8
(6.1)
42.0
(6.1)
42.2
(6.1)
42.0
(6.1)
18 000
(39,800)
18 100
(39,900)
18 200
(40,200)
18 100
(39,900)
17 900
(39,500)
18 000
(39,600)
18 100
(39,900)
18 000
(39,700)
36.3
(5.3)
36.5
(5.3)
36.7
(5.3)
36.5
(5.3)
3
317 GC Hydraulic Excavator Specifications

Major Component Weights

kg lb
Base Machine (with counterweight, upper frame [including swing frame], long undercarriage – does not include boom, stick, bucket, boom cylinders, stick cylinder, bucket cylinders, tracks, 90% fuel tank and75 kg [165 lb] operator).
With 3.05 mt (6,720 lb) Counterweight 11 430 25,200
With 3.57 mt (7,870 lb) Counterweight 11 950 26,350
Track Shoes:
600 mm (24") Triple Grouser Track Shoes 2340 5,160
600 mm (24") Rubber Track Shoe 2710 5,980
700 mm (28") Triple Grouser Track Shoes with Additional Steps 2580 5,680
Two Boom Cylinders 300 670
Weight of 90% Fuel Tank and 75 kg (165 lb) Operator 300 660
Counterweights:
3.05 mt (6,720 lb) Counterweight 3050 6,720
3.57 mt (7,870 lb) Counterweight 3570 7,870
Swing Frame 1690 3,720
Undercarriage:
Base Frame with Long Undercarriage 3900 8,600
Boom (including lines, pins, stick cylinder):
Reach Boom 5.1 m (16'9") 1320 2,910
Sticks (including lines, pins, bucket cylinder, bucket linkage):
Reach Stick R2.6 (8'6") 810 1,780
Reach Stick R2.9 m (9'6") 880 1,930
Thumb Ready Stick R2.9 m (9'6") 980 2,160
Reach Stick R3.1 m (10'2") 880 1,940
Buckets (without linkage):
3
(0.81 yd3) GD Bucket 740 1,630
0.62 m
3
(0.99 yd3) GD Bucket 640 1,410
0.76 m
3
(1.19 yd3) GD Bucket 730 1,600
0.91 m
3
(0.81 yd3) SD Bucket 680 1,510
0.62 m
3
(0.99 yd3) SD Bucket 740 1,630
0.76 m
3
(1.19 yd3) SD Bucket 820 1,800
0.91 m
Quick Coupler:
Pin Grabber Quick Coupler 260 580
4
317 GC Hydraulic Excavator Specifications
43

Dimensions

All dimensions are approximate and may vary depending on bucket selection.
1
6
5
9
10
7 8
2
Boom Option Reach Boom
5.1 m (16'9")
Stick Options Reach Stick Reach Stick Thumb Ready Stick Reach Stick
R2.6 (8'6") R2.9 (9'6") R2.9 (9'6") R3.1 (10'2")
Machine Height:
1
Top of Cab Height 2930 mm 9'7" 2930 mm 9'7" 2930 mm 9'7" 2930 mm 9'7"
Top of FOGS Height 3070 mm 10'1" 3070 mm 10'1" 3070 mm 10'1" 3070 mm 10'1"
Handrails Height 2940 mm 9'8" 2940 mm 9'8" 2940 mm 9'8" 2940 mm 9'8"
With Boom/Stick/Bucket Installed (withstick cylinder lines)
With Boom/Stick Installed (withstickcylinder lines)
With Boom Installed (withstickcylinderlines)
Machine Height (with 600 mm [24"] RubberShoe):
Top of Cab Height 2980 mm 9'9" 2980 mm 9'9" 2980 mm 9'9" 2980 mm 9'9"
Top of FOGS Height 3120 mm 10'3" 3120 mm 10'3" 3120 mm 10'3" 3120 mm 10'3"
Handrails Height 3000 mm 9'10" 3000 mm 9'10" 3000 mm 9'10" 3000 mm 9'10"
With Boom/Stick/Bucket Installed (withstick cylinder lines)
With Boom/Stick Installed (withstickcylinder lines)
With Boom Installed (withstickcylinderlines)
Machine Length:
2
With Boom/Stick/Bucket Installed (withstick cylinder lines)
With Boom/Stick Installed (withstickcylinder lines)
With Boom Installed (withstickcylinderlines)
Bucket Type GD GD GD GD
Bucket Capacity 1.00 m
Bucket Tip Radius 1300 mm 4'3" 1050 mm 3'5" 1050 mm 3'5" 1300 mm 4'3"
2980 mm 9'9" 3030 mm 9'11" 3030 mm 9'11" 3120 mm 10'3"
2870 mm 9'5" 2910 mm 9'7" 2910 mm 9'7" 2970 mm 9'9"
2460 mm 8'1" 2460 mm 8'1" 2460 mm 8'1" 2460 mm 8'1"
3040 mm 10'0" 3040 mm 10'0" 3040 mm 10'0" 3040 mm 10'0"
2930 mm 9'7" 2970 mm 9'9" 2970 mm 9'9" 3030 mm 9'11"
2520 mm 8'3" 2520 mm 8'3" 2520 mm 8'3" 2520 mm 8'3"
8550 mm 28'1" 8570 mm 28'1" 8570 mm 28'1" 8570 mm 28'1"
8520 mm 27'11" 8550 mm 28'1" 8550 mm 28'1" 8560 mm 28'1"
7560 mm 24'10" 7560 mm 24'10" 7560 mm 24'10" 7560 mm 24'10"
3
1.31 yd30.76 m30.99 yd30.76 m30.99 yd31.00 m31.31 yd
(continued on next page)
3
5
317 GC Hydraulic Excavator Specifications
43
Dimensions (continued)
All dimensions are approximate and may vary depending on bucket selection.
1
6
5
9
10
7 8
2
Boom Option Reach Boom
5.1 m (16'9")
Stick Options Reach Stick Reach Stick Thumb Ready Stick Reach Stick
R2.6 (8'6") R2.9 (9'6") R2.9 (9'6") R3.1 (10'2")
Upperframe Width 2540 mm 8'4" 2540 mm 8'4" 2540 mm 8'4" 2540 mm 8'4"
3
Tail Swing Radius:
4
3.05 mt (6,720 lb) Counterweight 2500 mm 8'2" 2500 mm 8'2" 2500 mm 8'2" 2500 mm 8'2"
3.57 mt (7,870 lb) Counterweight 2500 mm 8'2" 2500 mm 8'2" 2500 mm 8'2" 2500 mm 8'2"
Counterweight Clearance 1010 mm 3'4" 1010 mm 3'4" 1010 mm 3'4" 1010 mm 3'4"
5
Ground Clearance 430 mm 1'5" 430 mm 1'5" 430 mm 1'5" 430 mm 1'5"
6
Length to Center of Rollers 3170 mm 10'5" 3170 mm 10'5" 3170 mm 10'5" 3170 mm 10'5"
7
Track Length 3970 mm 13'0" 3970 mm 13'0" 3970 mm 13'0" 3970 mm 13'0"
8
Track Gauge 1990 mm 6'6" 1990 mm 6'6" 1990 mm 6'6" 1990 mm 6'6"
9
Undercarriage Width:
10
600 mm (24") Shoes 2590 mm 8'6" 2590 mm 8'6" 2590 mm 8'6" 2590 mm 8'6"
600 mm (24") Rubber Shoe 2590 mm 8'6" 2590 mm 8'6" 2590 mm 8'6" 2590 mm 8'6"
700 mm (28") Shoes (with steps) 2690 mm 8'10" 2690 mm 8'10" 2690 mm 8'10" 2690 mm 8'10"
Bucket Type GD GD GD GD
3
Bucket Capacity 1.00 m
Bucket Tip Radius 1300 mm 4'3" 1050 mm 3'5" 1050 mm 3'5" 1300 mm 4'3"
1.31 yd30.76 m30.99 yd30.76 m30.99 yd31.00 m31.31 yd
3
6
317 GC Hydraulic Excavator Specifications
Meters
R3.1 (10'2")
05101520253035 Feet
Feet

Working Ranges

All dimensions are approximate and may vary depending on bucket selection.
10
30
9
8
25
7
20
6
5
15
10
10
15
20
3
4
3
2
5
1
0
0
1
5
2
7
3
1
4
5
6
7
4
5
2
8
01234567891011 –1
R2.9 (9'6")
R2.6 (8'6")
Meters
6
Boom Option Reach Boom
5.1 m (16'9")
Stick Options Reach Stick Reach Stick Thumb Ready Stick Reach Stick
R2.6 (8'6") R2.9 (9'6") R2.9 (9'6") R3.1 (10'2")
Maximum Digging Depth 6100 mm 20'0" 6400 mm 21'0" 6400 mm 21'0" 6600 mm 21'8"
1
Maximum Reach at Ground Line 8790 mm 28'10" 9010 mm 29'7" 9010 mm 29'7" 9200 mm 30'2"
2
Maximum Cutting Height 8940 mm 29'4" 8900 mm 29'2" 8900 mm 29'2" 8990 mm 29'6"
3
Maximum Loading Height 6270 mm 20'7" 6280 mm 20'7" 6280 mm 20'7" 6370 mm 20'11"
4
Minimum Loading Height 2290 mm 7'6" 1990 mm 6'6" 1990 mm 6'6" 1790 mm 5'10"
5
Maximum Depth Cut for 2440 mm (8'0")
6
5880 mm 19'3" 6170 mm 20'3" 6170 mm 20'3" 6380 mm 20'11"
LevelBottom
Maximum Vertical Wall Digging Depth 4980 mm 16'4" 4960 mm 16'3" 4960 mm 16'3" 5150 mm 16'11"
7
Minimum Working Equipment Radius 2980 mm 9'9" 2940 mm 9'8" 2940 mm 9'8" 2930 mm 9'7"
8
Bucket Digging Force (ISO) 123 kN 27,650 lbf 123 kN 27,650 lbf 123 kN 27,650 lbf 123 kN 27,650 lbf
Stick Digging Force (ISO) 80 kN 17,980 lbf 75 kN 16,860 lbf 75 kN 16,860 lbf 71 kN 15,960 lbf
Bucket Type GD GD GD GD
3
Bucket Capacity 1.00 m
1.31 yd30.76 m30.99 yd30.76 m30.99 yd31.00 m31.31 yd
Bucket Tip Radius 1300 mm 4'3" 1050 mm 3'5" 1050 mm 3'5" 1300 mm 4'3"
3
7
317 GC Hydraulic Excavator Specifications
Reach Boom Lift Capacities – Counterweight: 3.05 mt (6,720 lb) – without Bucket
2.6 m (8'6") 5.1 m (16'9")
R2.6
1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0"
7500 mm kg *3350 *3350 4770
25'0" lb *7,700 *7,700 *7,450 *7,450 15'1"
6000 mm kg *3600 3350 *2950 *2950 6190
20'0" lb *6,650 6,650 *6,450 *6,450 20'0"
4500 mm kg *4650 *4650 *4300 3300 *2850 2550 7020
15'0" lb *10,050 *10,050 *9,450 7,100 *6,200 5,700 22'10"
3000 mm kg *8900 8850 *5900 4850 *4850 3200 *2900 2300 7450
10'0" lb *18,900 *18,900 *12,700 10,450 *10,500 6,850 *6,300 5,050 24'4"
1500 mm kg *7250 4500 4900 3050 *3500 2200 *3050 2200 7560
5'0" lb *15,600 9,700 10,550 6,500 *6,750 4,800 24'9"
0 mm kg *6200 *6200 7350 4300 4800 2900 *3450 2200 7370
0'0" lb *14,200 *14,200 15,800 9,250 10,300 6,300 *7,600 4,850 24'2"
–1500 mm kg *5650 *5650 *10 050 7750 7300 4250 4750 2900 3950 2450 6850
–5'0" lb *12,650 *12,650 *22,950 16,650 15,650 9,100 10,150 6,200 8,700 5,350 22'4"
–3000 mm kg *9900 *9900 *10 750 7900 7350 4300 4900 3000 5900
–10'0" lb *22,300 *22,300 *23,250 16,950 15,750 9,200 10,950 6,650 19'2"
–4500 mm kg *7750 *7750 *5450 4900 4240
–15'0" lb *16,400 *16,400 *11,900 11,250 13'6"
600 mm (24 in) Triple Grouser Track Shoes
1990 mm (6'6") 3970 mm (13'0")
3170 mm (10'5")
Reach Boom Lift Capacities – Counterweight: 3.05 mt (6,720 lb) – without Bucket
mm ft/in
2.6 m (8'6") 5.1 m (16'9")
R2.6
1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0"
7500 mm kg *3350 *3350 4770
25'0" lb *7,700 *7,700 *7,450 *7,450 15'1"
6000 mm kg *3600 3400 *2950 *2950 6190
20'0" lb *6,650 *6,650 *6,450 *6,450 20'0"
4500 mm kg *4650 *4650 *4300 3400 *2850 2600 7020
15'0" lb *10,050 *10,050 *9,450 7,250 *6,200 5,800 22'10"
3000 mm kg *8900 *8900 *5900 4950 *4850 3250 *2900 2350 7450
10'0" lb *18,900 *18,900 *12,700 10,600 *10,500 6,950 *6,300 5,150 24'4"
1500 mm kg *7250 4600 5000 3100 *3500 2250 *3050 2250 7560
5'0" lb *15,600 9,900 10,750 6,650 *6,750 4,900 24'9"
0 mm kg *6200 *6200 7500 4400 4900 3000 *3450 2250 7370
0'0" lb *14,200 *14,200 16,150 9,450 10,500 6,400 *7,600 4,950 24'2"
–1500 mm kg *5650 *5650 *10 050 7900 7450 4350 4850 2950 4050 2500 6850
–5'0" lb *12,650 *12,650 *22,950 17,000 15,950 9,300 10,400 6,300 8,900 5,450 22'4"
–3000 mm kg *9900 *9900 *10 750 8050 *7450 4350 5000 3050 5900
–10'0" lb *22,300 *22,300 *23,250 17,250 *16,050 9,400 11,150 6,800 19'2"
–4500 mm kg *7750 *7750 *5450 5000 4240
–15'0" lb *16,400 *16,400 *11,900 11,450 13'6"
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.
Theydo not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.
Lift capacity stays with ±5% for all available track shoes.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
600 mm (24") Rubber Track Shoe
1990 mm (6'6") 3970 mm (13'0")
ISO 10567
3170 mm (10'5")
mm ft/in
8
317 GC Hydraulic Excavator Specifications
Reach Boom Lift Capacities – Counterweight: 3.05 mt (6,720 lb) – without Bucket
2.6 m (8'6") 5.1 m (16'9")
R2.6
1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0"
7500 mm kg *3350 *3350 4770
25'0" lb *7,700 *7,700 *7,450 *7,450 15'1"
6000 mm kg *3600 3400 *2950 *2950 6190
20'0" lb *6,650 *6,650 *6,450 *6,450 20'0"
4500 mm kg *4650 *4650 *4300 3350 *2850 2600 7020
15'0" lb *10,050 *10,050 *9,450 7,200 *6,200 5,750 22'10"
3000 mm kg *8900 *8900 *5900 4900 *4850 3250 *2900 2300 7450
10'0" lb *18,900 *18,900 *12,700 10,550 *10,500 6,950 *6,300 5,100 24'4"
1500 mm kg *7250 4550 4950 3100 *3500 2250 *3050 2200 7560
5'0" lb *15,600 9,850 10,700 6,600 *6,750 4,850 24'9"
0 mm kg *6200 *6200 7450 4350 4850 2950 *3450 2250 7370
0'0" lb *14,200 *14,200 16,000 9,400 10,400 6,350 *7,600 4,950 24'2"
–1500 mm kg *5650 *5650 *10 050 7850 7400 4300 4800 2900 4000 2450 6850
–5'0" lb *12,650 *12,650 *22,950 16,850 15,850 9,250 10,300 6,250 8,800 5,400 22'4"
–3000 mm kg *9900 *9900 *10 750 8000 7450 4350 5000 3050 5900
–10'0" lb *22,300 *22,300 *23,250 17,150 15,950 9,350 11,100 6,750 19'2"
–4500 mm kg *7750 *7750 *5450 4950 4240
–15'0" lb *16,400 *16,400 *11,900 11,350 13'6"
700 mm (28") Triple Grouser Track Shoes
1990 mm (6'6") 3970 mm (13'0")
3170 mm (10'5")
Reach Boom Lift Capacities – Counterweight: 3.05 mt (6,720 lb) – without Bucket
mm ft/in
2.9 m (9'6") 5.1 m (16'9")
R2.9
1500 mm/5'0" 3000 mm/10'0" 4500 mm/15'0" 6000 mm/20'0" 7500 mm/25'0"
7500 mm kg *2950 *2950 5100
25'0" lb *6,600 *6,600 16'2"
6000 mm kg *3650 3400 *2650 *2650 6450
20'0" lb *7,450 7,250 *5,900 *5,900 20'11"
4500 mm kg *4050 3350 *2600 2450 7240
15'0" lb *8,850 7,150 *5,700 5,400 23'7"
3000 mm kg *8000 *8000 *5550 4900 *4600 3200 *3350 2250 *2700 2200 7660
10'0" lb *17,050 *17,050 *11,950 10,500 *10,000 6,850 *6,200 4,800 *5,850 4,800 25'1"
1500 mm kg *6950 *6950 *6950 4500 4900 3000 3500 2200 *2900 2050 7780
5'0" lb *16,650 *16,650 *14,950 9,750 10,550 6,500 7,550 4,700 *6,300 4,550 25'5"
0 mm kg *6950 *6950 7350 4300 4750 2900 3450 2150 *3250 2100 7590
0'0" lb *15,950 *15,950 15,750 9,200 10,200 6,200 *7,150 4,600 24'10"
–1500 mm kg *5650 *5650 *10 000 7650 7250 4200 4700 2850 3750 2300 7080
–5'0" lb *12,550 *12,550 *22,750 16,450 15,500 9,000 10,100 6,100 8,200 5,000 23'2"
–3000 mm kg *9250 *9250 *11 150 7750 7250 4200 4700 2850 4550 2750 6160
–10'0" lb *20,750 *20,750 *24,050 16,700 15,600 9,050 10,150 6,150 10,100 6,150 20'1"
–4500 mm kg *8550 8050 *5750 4400 *5550 4250 4610
–15'0" lb *18,200 17,300 *12,200 9,700 14'9"
* Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.
Theydo not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.
Lift capacity stays with ±5% for all available track shoes.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.
600 mm (24 in) Triple Grouser Track Shoes
1990 mm (6'6") 3970 mm (13'0")
ISO 10567
3170 mm (10'5")
mm ft/in
9
Loading...
+ 18 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use