Casio XJ-SC215, XJ-S47, XJ-S57, XJ-S52, XJ-S42 User Manual

...

DATA PROJECTOR

XJ-SC210/XJ-SC215 XJ-S32/XJ-S37 XJ-S42/XJ-S47 XJ-S52/XJ-S57

* USB Port Equipped Models

User’s Guide

z Be sure to read the precautions in the

separate User’s Guide (Basic Operation). For details about setting up the projector and lamp replacement, see the User’s Guide (Basic Operation).

z Be sure to keep all user documentation handy

for future reference.

* * *

• DLP is a registered trademark of Texas Instruments of the United States.

• Microsoft, Windows, and Windows Vista are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries.

• Other company and product names may be registered product names or trademarks of their respective owners.

• The contents of this User’s Guide are subject to change without notice.

• Copying of this manual, either in part or its entirety is forbidden. You are allowed to use this manual for your own personal use. Any other use is forbidden without the permission of CASIO COMPUTER CO., LTD.

• CASIO COMPUTER CO., LTD. shall not be held liable for any lost profits or claims from third parties arising out of the use of this product or this manual.

• CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to loss of data due to malfunction or maintenance of this product, or any other reason.

• The sample screens shown in this manual are for illustrative purposes only, and may not be exactly the same as the screens actually produced by the product.

About this manual... .......................................................................................... 4

USB Port Equipped Model Users................................................................................. 4

Operation During Projection ..........................................5

Image Operations During Projection ................................................................. 5

Adjusting Image Brightness ......................................................................................... 5

Selecting the Color Mode............................................................................................. 6

Zooming an Image .......................................................................................................6

Momentarily Cutting Off the Input Source Image ......................................................... 7

Freezing an Image .......................................................................................................7

Displaying a Pointer in the Projected Image ................................................................ 8

Changing the aspect ratio of the projected image ....................................................... 9

Eco Mode ........................................................................................................ 10

Using the [FUNC] Key ..................................................................................... 10

Configuring Advanced Projector Settings.................. 11

Basic Setup Menu Operations ........................................................................ 11

Displaying the Setup Menu ........................................................................................ 11

Configuring Setup Menu Settings .............................................................................. 11

Basic Setup Menu Example....................................................................................... 12

Password Protecting the Projector.................................................................. 14

Inputting a Password ................................................................................................. 14

Using the Password Feature...................................................................................... 14

Entering the Password when Turning On the Projector .............................................16

Restoring Projector Settings to Their Initial Factory Defaults.......................... 17

Setup Menu Contents ..................................................................................... 18

Image Adjustment 1 Main Menu ................................................................................ 19

Image Adjustment 2 Main Menu ................................................................................ 20

Volume Adjustment Main Menu ................................................................................. 21

Screen Settings Main Menu.......................................................................................22

Input Settings Main Menu .......................................................................................... 24

Option Settings 1 Main Menu..................................................................................... 25

Option Settings 2 Main Menu..................................................................................... 26

USB Settings Main Menu Items (USB Port Equipped Models Only).......................... 28

Operational Info Main Menu....................................................................................... 28

Restore All Defaults Main Menu.................................................................................29

Appendix........................................................................ 30

Remote Controller Signal Range .................................................................... 30

Projection Distance and Screen Size.............................................................. 31

Aspect Ratio Setting and Projection Image during RGB Input........................ 32

Supported Signals ........................................................................................... 33

About this manual...

z This manual assumes that you are already familiar with the contents of the separate

“User’s Guide (Basic Operation)”.

z All of the operations in this manual are explained using the remote controller that comes

with the projector. The following key operations can also be performed on the projector instead of the remote controller: [MENU], [S], [T], [X], [W], [ENTER], [ESC], [ ], [INPUT], [AUTO], [ZOOM +], [ZOOM –], [FOCUS S], [FOCUS T].

To perform this remote controller operation:

[ENTER] Button in the center of the cursor keys

[ZOOM +], [ZOOM –] [ZOOM] button in combination with the [X] and [W] (or [S] and

[FOCUS S], [FOCUS T]

USB Port Equipped Model Users

This manual does not include information about using the XJ-SC215/XJ-S37/XJ-S47/XJ-S57 model projector while a USB device is connected to its USB port. For details about connecting USB devices to the projector and procedures you need to perform to project images from a USB device, see “USB Function Guide” on the bundled CD-ROM.

Use this projector button:

[T]) buttons

[FOCUS] button in combination with the [S] and [T] (or [X] and [W]) buttons

Operation During Projection

This section explains the various types of operations you can perform while the projector is projecting an image.

Image Operations During Projection

You can perform the following operations while projecting an image.

z Image brightness adjustment z Color mode selection z Image zooming z Momentary cut off of the input source image and projection of a black or blue screen, or

a logo

z Image freeze z Pointer display in the projected image z Aspect ratio switching

Adjusting Image Brightness

Note

(for USB port equipped model users)

Use the setup menu (page 11) to adjust image brightness when you have an external device connected to the projector’s USB port.

To adjust image brightness

Press the [BRIGHT] key.

z This displays the brightness adjustment window.

Use the [W] and [X] keys to adjust image brightness.

To hide the window, press the [ESC] key.

Selecting the Color Mode

You can select from among five different color mode settings to optimize the projected image in accordance with image contents and projection conditions.

To change the color mode

Press the [COLOR MODE] key.

z This displays the color mode selection window. The currently selected color mode is the

one whose button is selected (filled in).

Use the [T] and [S] keys to move the highlighting to the color mode you want

to select, and then press the [ENTER] key.

z This will select the button next to the highlighted color mode name. z For details on what each color mode does, see “Color Mode” under “Image Adjustment 1

Main Menu” on page 19.

To hide the window, press the [ESC] key.

Zooming an Image

Press the [D-ZOOM +] key.

z This will enlarge the center of the projected image one step.

To zoom in on the center of the projected image more, press the [D-ZOOM +]

key again. To zoom out, press the [D-ZOOM –] key.

z Each press of [D-ZOOM +] zooms in (increases the zoom factor), while [D-ZOOM –]

zooms out. Holding down either key continuously scrolls the zoom factor.

While an image is zoomed, use [S], [T], [W], and [X] to scroll the view to

other parts of the image.

To exit the zoom operation, press the [ESC] key.

Momentarily Cutting Off the Input Source Image

Press the [BLANK] key.

z This temporarily cuts off the image from the input source and projects a black screen in

its place.

To resume projection of the image from the input source, press the [BLANK] key

(or [ESC] key).

Note

You can specify projection of a black screen or blue screen, or a logo. For details, see “Blank Screen” under “Screen Settings Main Menu” on page 23.

Freezing an Image

Pressing the [FREEZE] key freezes the projected image.

To freeze the projected image

While an image is being projected from an input source, press the [FREEZE]

key.

z This will capture the image that is on the screen at the moment you press [FREEZE]

and stores it in projector memory. That image remains projected on the screen.

To restore projection of the image from an input source, press the [ESC] key.

Displaying a Pointer in the Projected Image

You can select from among different pointer styles, including various arrow styles, for display in the projected image. Pointers can be used during a presentation to indicate or highlight a specific part of the image.

Note

Depending on the pointer style you are using, the pointer may not display properly when you are using keystone correction. If this happens, use the [KEYSTONE +] and [KEYSTONE –] keys to change the keystone correction value to zero.

To display a pointer in the image

Press the [POINTER] key.

z This will cause a pointer to appear in the image. z You also can use the setup menu to specify the pointer type that appears first when you

press the [POINTER] key. For details, see “Pointer” under “Option Settings 2 Main Menu” on page 26.

Use the cursor keys to move the pointer to the location you want.

z Holding down a cursor key moves the cursor at high speed.

To modify the pointer as described below, press the [STYLE] key.

For this pointer type: Pressing [STYLE] will change it like this:

J J

Toggle between flashing and not flashing

To select the pointer type

Press the [POINTER] key to display the pointer.

Keep pressing the [POINTER] key until the pointer you want is displayed.

z Each press of the [POINTER] key cycles through the available pointer types.

To clear the pointer from the image

Press the [ESC] key.

Changing the aspect ratio of the projected image

Press the [ASPECT] key to change the aspect ratio of the projected image. How the aspect ratio changes depends on the current input source.

Input Source Pressing [ASPECT] will do this:

VIDEO or component Toggles the aspect ratio of the image between 4:3 and 16:9. When the

RGB Toggles the aspect ratio of the image between 4:3 and “Maintain”.

Note

z For details about how the aspect ratio setting affects the projected image when the

input source is RGB, see “Aspect Ratio Setting and Projection Image during RGB Input” (page 32).

z You also can change the aspect ratio setting using the setup menu. For details, see

“Aspect Ratio” under “Screen Settings Main Menu” on page 22.

input source is a component signal with an aspect ratio of 16:9, the projection aspect ratio also will become 16:9 automatically and pressing the [ASPECT] key will not change it.

Selecting 4:3 will project with an aspect ratio of 4:3, regardless of the input source aspect ratio. Selecting “Maintain” will project while maintaining the aspect ratio of the input source.

Important!

Note that enlarging or reducing the size of an image using the [ASPECT] key for commercial purposes or public presentation may infringe on the legally protected copyright of the copyright holder of the original material.

Eco Mode

Turning on the Eco Mode reduces lamp brightness to save power. The projector’s cooling fan also operates at a slower speed while the Eco Mode is turned on, which results in quieter operation. Turn on the Eco Mode when your priority is quieter operation. Turn off the Eco Mode when your priority is maximum brightness.

To turn the Eco Mode on or off

Press [ECO] to toggle the Eco Mode on and off.

Note

(for USB port equipped model users)

Use the setup menu (page 11) to select the lamp mode when you have an external device connected to the projector’s USB port.

Using the [FUNC] Key

Pressing the [FUNC] key displays the menu shown below.

You can use this menu to perform the operations described below.

z Adjust image brightness

Highlight “Brightness” and then press the [ENTER] key.

• This performs the same operation as pressing the [BRIGHT] key ( key) described on page 5.

z Turn the Eco Mode on or off

Highlight “Eco Mode” and then press the [ENTER] key.

• This performs the same operation as pressing the [ECO] key ( page 10.

z Select the aspect ratio of the projected image

Highlight “Aspect Ratio” and then press the [ENTER] key.

• This performs the same operation as pressing the [ASPECT] key ( page 9.

key) described on



Note

(for USB port equipped model users)

When you have an external device connected to the projector’s USB port, use the [FUNC], [ ], [ “USB Function Guide” on the bundled CD-ROM.

], and [] keys to control the connected device. For details, see the

Configuring Advanced Projector Settings

Your projector has a setup menu that you can use to configure advanced settings.

Basic Setup Menu Operations

Displaying the Setup Menu

Pressing the [MENU] key displays the menu shown below in the center of the projection screen.

Main menu

The main menu includes nine (10 on the USB port equipped models) main menu items. The currently selected main menu item is the one that is highlighted.

Sub-menu

The sub-menu shows each individual setting under each main menu item, and its current setting.

Guidance text

Guidance text provides a brief description of the main key operations available for the operation you are currently performing.

To exit the setup menu

Press the [MENU] key.

Configuring Setup Menu Settings

Press the [MENU] key to display the setup menu.

Use the [T] and [S] keys to select the main menu item you want by

highlighting it.

Press the [ENTER] key.

Use the [T] and [S] keys to select the sub-menu item you want by highlighting

it.

Perform the required operation on the selected sub-menu item screen.

z The guidance text explains the operations you need to perform to configure each setting.

To return to the main menu from the sub-menu, press the [ESC] key.

To exit the setup menu, press the [MENU] key.

+ 24 hidden pages