Casio XJ-ST155, XJ-H1700, XJ-H1650, XJ-H1750, XJ-ST145 User Manual

EFS

DATA PROJECTOR

XJ-H1600/XJ-H1650

XJ-H1700/XJ-H1750

XJ-ST145*/XJ-ST155

* USB port models * Modèles à port USB * Modelos con puerto USB

English

Setup Guide

Be sure to keep all user documentation handy for future reference.

Français

Guide d’installation

Conservez la documentation à portée de main pour toute référence future.

Español

Guía de configuración

Asegúrese de tener a mano toda la documentación del usuario para futuras consultas.

• Some models covered by this User’s Guide may not be available in certain geographic areas.

• Certains modèles couverts par ce mode d’emploi peuvent ne pas être commercialisés dans certaines zones géographiques.

• Algunos modelos cubiertos por esta Guía del usuario pueden no estar disponibles en determinadas áreas geográficas.

Contents

Safety Precautions ..................................... E-1

Operating Precautions ............................... E-7

About the Light Source Unit...........................E-7

Laser Precautions ..........................................E-7

Other Precautions ..........................................E-8

Precaution when Handling the

Projector after Use .........................................E-9

Stowing the Projector in the Carrying Bag.....E-9

Cleaning the Projector....................................E-9

Unpacking ................................................. E-10

General Guide ........................................... E-11

Getting Ready ........................................... E-12

Loading Remote Controller Batteries...........E-12

Setting Up the Projector...............................E-12

Setup Precautions........................................E-13

Changing the Projector Elevation Angle ......E-13

Connecting a Computer to the Projector.....E-14

Starting and Stopping Projection ............E-15

To start projection ....................................... E-15

To turn off the projector .............................. E-15

Using the CD-ROM ...................................E-16

To view the contents of a

User’s Guide (PDF)...................................... E-16

Indicators ...................................................E-17

Troubleshooting ........................................E-18

Main Specifications...................................E-20

z DLP is a registered trademark of Texas Instruments Incorporated of the United States. z Microsoft, Windows, Windows Vista, and PowerPoint are registered trademarks or trademarks of Microsoft

Corporation in the United States and other countries.

z HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of

HDMI Licensing, LLC.

z Apple and Macintosh are registered trademarks of Apple Inc. of the United States. z Adobe and Reader are registered trademarks of Adobe Systems Incorporated. z XGA is a registered trademark of IBM Corporation of the United States. z ArcSoft and the ArcSoft logo are trademarks or registered trademarks of ArcSoft, Inc. in the United States

and other countries.

z Other company and product names may be registered trademarks or trademarks of their respective

owners.

z The contents of this User’s Guide are subject to change without notice. z Copying of this manual, either in part or its entirety, is forbidden. You are allowed to use this manual for your

own personal use. Any other use is forbidden without the permission of CASIO COMPUTER CO., LTD.

z CASIO COMPUTER CO., LTD. shall not be held liable for any lost profits or claims from third parties arising

out of the use of this product or this manual.

z CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to loss of data caused

by malfunction or maintenance of this product, or any other reason.

z The sample screens shown in this manual are for illustrative purposes only, and may not be exactly the

same as the screens actually produced by the product.

z Unless specifically stated otherwise, all illustrations in this manual show the XJ-H1650.

Safety Precautions

Thank you for selecting this CASIO product. Be sure to read these “Safety Precautions” before trying to use it. After reading this User’s Guide, keep it in a safe place for future reference.

About safety symbols

Various symbols are used in this User’s Guide and on the product itself to ensure safe use, and to protect you and others against the risk of injury and against material damage. The meaning of each of the symbols is explained below.

Danger

Warning

Caution

Icon Examples

A triangle indicates a situation against which you need to exercise caution. The example shown

’

here indicates you should take precaution against electric shock.

A circle with a line through it indicates information about an action that you should not perform. The specific action is indicated by the figure inside the circle. The example shown here means

disassembly is prohibited. A black circle indicates information about an action that you must perform. The specific action

is indicated by the figure inside the circle. The example shown here indicates you must unplug

the power cord from the power outlet.

This symbol indicates information that, if ignored or applied incorrectly, creates the risk of death or serious personal injury.

This symbol indicates information that, if ignored or applied incorrectly, could possibly create the risk of death or serious personal injury.

This symbol indicates information that, if ignored or applied incorrectly, could possibly create the risk of personal injury or material damage.

Precautions During Use

Warning

● Smoke, odor, heat, and other abnormalities

Should you ever notice smoke, strange

odor, or any other abnormality, immediately stop using the projector. Continued use creates the risk of fire and electric shock. Immediately perform the

following steps. Unplug the projector. Contact your original dealer or authorized

CASIO service center.

● Malfunction

Immediately stop using the projector if

E-1

the screen appears abnormal, or if any other abnormal operation occurs even though you are operating the projector correctly. Continued use creates the risk of fire and electric shock. Immediately

perform the following steps. Turn off the projector. Unplug the projector. Contact your original dealer or authorized

CASIO service center.

Safety Precautions

● Power cord

Misuse of the power cord creates the risk

• Be sure to use only the accessories that come

• Make sure that you use a power source with the

• Do not overload a power outlet with too many

• Do not locate the power cord near a stove.

• Do not use the power cord that comes with the

• Do not share the outlet supplying power to the

• Never use the power cord while it is still bundled

• Use a conveniently located power outlet that you

• Never place heavy objects on the power cord

• Make sure the power cord is not pinched

• Never try to modify the power cord, allow it to

• Do not twist the power cord or pull on it.

• When using this projector in the country where

of fire and electric shock. Make sure that you always observe the following precautions.

with the projector.

same voltage as that specified for the projector.

devices.

projector with any other device.

projector with other devices. If you are using an extension cord, make sure that the ampere rating of the extension cord is compatible with the power consumption value of this projector.

together.

can reach easily when you need to unplug the projector.

A damaged power cord creates the risk of fire and electric shock. Make sure that you always observe the following precautions.

and never expose it to heat.

between the wall and the rack or table where the projector is located, and never cover the power cord with a cushion or other object.

become damaged, or subject it to excessive bending.

Never touch the power cord or plug while your hands are wet. Doing so creates the risk of electric shock.

you purchased it, be sure to use the power cord that came with it. Whenever using the projector in another country, be sure to purchase and use a power cord that is rated for the voltage of that country. Also make sure that you are aware of the Safety Standards that apply in that country.

When going out, make sure the projector is in a location away from pets and other animals, and unplug the power plug from the power outlet. A power cord damaged by chewing can cause shorts, and creates the risk of fire.

● Water and foreign matter

Never allow water to get on the projector.

+ % %

● Disassembly and modification

Be sure to leave all internal inspection, adjustment, and repair up to your original dealer or authorized CASIO service center.

● Dropping and impact

Water creates the risk of fire and electric

shock.

Never place a vase or any other container

of water on top of the projector. Water

creates the risk of fire and electric shock.

Water or other liquid, or foreign matter

(metal, etc.) getting into the projector

creates the risk of fire and electric shock.

Should anything get inside the projector,

immediately perform the following steps.

Turn off the projector. Unplug the projector. Contact your original dealer or authorized

CASIO service center.

Never try to take the projector apart or

modify it in any way. The projector

contains a large number of high-voltage

components that create the risk of

electric shock and burn injury. Also, note

that problems caused by unauthorized

projector disassembly or modification are

not covered by the warranty and are not

eligible for repair by CASIO.

Continued use of the projector after it has

been damaged by dropping or other

mistreatment creates the risk of fire and

electric shock. Immediately perform the

following steps. Turn off the projector.

Unplug the projector. Contact your original dealer or authorized

CASIO service center.

E-2

Safety Precautions

● Disposal by burning

Never try to dispose of the projector by

● Looking into the lens or vents while

● Blocking the vents

• Allow at least 30cm (11.8 inches) between the

• Do not insert the projector into any space where

• Never cover the projector with a blanket or any

• Locate the projector on a firm, flat surface during

• Never stand the projector up on either end during

● Projector cabinet

’

● Cleaning

burning it. Doing so can cause an explosion, which creates the risk of fire and personal injury.

light source unit is on

Never look directly into the lens or vents while light source unit is on. The strong light emitted by the projector creates the risk of eye damage.

Never allow the vents to become blocked. Doing so causes internal heat build up, which creates the risk of fire and breakdown of the projector. Touching the projector while it is hot creates the risk of burn injury. Make sure that you always observe the following precautions.

projector and walls.

air circulation is poor.

similar item.

use. Never use the projector while it is on a carpet, blanket, towel, seat cushion, or other pliable surface.

use.

Never open the projector’s cabinet. Doing so creates the risk of electric shock.

Before cleaning the projector, be sure to turn it off and unplug it from the power outlet. Failure to do so creates the risk of electric shock.

● Intake-exhaust vents

The intake-exhaust vents become very hot while the projector is running. Never touch them. Doing so creates the risk of burn injury. The areas near the intake-exhaust vents also become quite hot. Never locate objects made of plastic or other heat-sensitive materials near or under the projector. Doing so creates the risk of deformation and discoloration of the object.

● Lens cover

Be sure to remove the lens cover before turning on the projector. Never leave the lens cover attached while the projector is in use.

● Location

Never locate the projector in any of the following types of locations. Doing so creates the risk of fire and electric shock.

• Near an area subject to strong vibration

• An area subject to large amounts of moisture or dust

• In a kitchen or other area exposed to oil smoke

• Near a heater, on a heated carpet, or in an area exposed to direct sunlight

• An area subject to temperature extremes (Operating temperature range is 5°C to 35°C (41°F to 95°F)).

● Heavy objects

Never place heavy objects on the projector or climb on top of the projector. Doing so creates the risk of fire and electric shock.

● Water

Never locate the projector in a bathroom or anywhere else there is the chance that it will be splashed with water.

● Unstable location

Never place the projector on an unstable

surface or on a high shelf. Doing so can cause it to fall, creating the risk of personal injury.

E-3

Safety Precautions

● Using the projector on a base with casters

Whenever using the projector on a base that has casters, make sure that you lock the casters when not moving the base.

● Lightening

During a lightening storm, do not touch the plug of the projector’s power cord.

● Remote controller

Never try to take the remote controller

● Radio waves emitted by the wireless

• If you are using a pace maker or any other

apart or modify it in any way. Doing so creates the risk of electric shock, burn injury, and other personal injury. Be sure to leave all internal inspection, adjustment, and repair up to your original dealer or authorized CASIO service center.

Never allow the remote controller to become wet. Water creates the risk of fire and electric shock.

adapter (which is provided with some projector models)

Never use this product inside of an aircraft or medical facility, or in any other location where use of such devices is prohibited. Radio waves can have an effect on the operation of electronic equipment and medical equipment, and cause accidents.

Do not use this product in the vicinity of high-precision electronic instruments or electronic devices that handle weak radio signals. Radio waves can have an effect on the operation of such equipment, and cause accidents.

electronic medical device, be sure to consult your physician or device manufacturer before using this product.

Caution

● Power cord

Misuse of the power cord creates the risk

• When unplugging the power cord, always grasp

• Insert the plug into the power outlet as far as it

• After using the projector, unplug it from the

• Unplug the projector from the power outlet if you

• At least once a year, unplug the power plug and

• Never use detergent to clean the power cord,

• Before moving the projector, be sure to turn it off

● Backup of important data

● During projection, make sure there is

An object in front of the lens creates the risk of fire.

● Lens effect

Never have an aquarium or any other object that produces a lens effect in front of the projector while the light source unit is on. Such an object creates the risk of fire.

● Lens

Never touch the lens with your hand.

● Wireless adapter (provided with some

of fire and electric shock. Make sure that you always observe the following precautions.

the plug, and do not pull on the power cord.

will go.

power outlet.

do not plan to use it for a long time.

use a dry cloth or vacuum cleaner to clear dust from the area around the prongs of the power plug.

especially the power plug and jack.

and unplug it from the power outlet first.

Be sure to keep separate written records of all data stored in projector memory. Memory data can be lost due to breakdown, maintenance, etc.

nothing in front of the lens blocking the light.

projector models)

Keep the wireless adapter out of the reach of small children. Accidental swallowing of a wireless adapter can interfere with proper breathing and create a life-threatening situation.

E-4

Safety Precautions

Battery Precautions

Danger

Should liquid leaking from an alkaline battery get into the eyes, immediately take

the following steps.

Do not rub the eyes! Wash the eyes with clean

water. Contact a physician immediately. Failure to

take immediate action can lead to loss of eyesight.

Warning

Misuse of batteries can cause them to leak and stain the area around them, or to explode, creating the risk of fire and personal injury. Make sure that you always observe the following precautions.

• Never try to take batteries apart and do

Misuse of batteries can cause them to leak and stain the area around them, or to explode, creating the risk of fire and personal injury. Make sure that you always observe the following precaution.

not allow them to become shorted.

• Never expose batteries to heat or throw them into fire.

• Never mix old batteries and new ones.

• Never mix batteries of different types.

• Never try to charge batteries.

• Take care that batteries are oriented correctly when you load them.

Caution

• Use only the type of batteries that is specified for the remote controller.

Lens Cover (XJ-ST145 and XJ-ST155 only)

Warning

The lens cover of this Data Projector uses

a magnetic attachment. Because of this, it should not be used in the vicinity of anyone wearing a pacemaker or any other electric medical device. Should any problem arise, move the lens cover away from the person experiencing the problem and consult a physician.

Caution

Keep the lens cover away from floppy disks, magnetic cards, magnetic tapes, prepaid cards, checks, and any other media that uses magnetic recording. The lens cover can corrupt data recorded on magnetic media.

Other

Caution

Allowing dust to build up inside the projector for long periods without cleaning creates the risk of fire and breakdown. Contact your original dealer or authorized CASIO service center once a year about having the interior of the projector cleaned. Note that you will be charged for cleaning.

● Dead batteries

Be sure to remove batteries from the remote controller as soon as they go dead.

• Remove batteries from the remote

● Disposing of batteries

Make sure that you dispose of used batteries in accordance with the rules and regulations in your local area.

controller if you do not plan to use it for a long time.

E-5

Safety Precautions

3D Glasses

Warning

3D images should not be viewed by the

• Individuals with heart disease

• Individuals with a history of photodermatosis

• Individuals with epileptic tendencies

• When you are in poor physical condition

• When you feel you are losing your health

• Should you ever experience fatigue, loss of

• Should the 3D image ever start appearing double

types of individuals described below. Doing so creates the risk of loss of health.

Caution

Do not view 3D images if you are experiencing any of the symptoms described below.

health, or abnormal feelings while watching 3D images, stop watching. Continued watching could damage your health.

or lose its three-dimensionality, stop watching. Continued watching can cause eye fatigue.

Avoid watching 3D images for very long periods. Doing so can cause eye fatigue.

Be sure to observe the following precautions when watching 3D images.

The normal minimum age for viewing 3D images is six. When 3D images are being watched by a small child, a competent adult should be on hand to monitor the child, to ensure that the 3D images are suitable for the child, that the child does not watch the 3D images for too long an uninterrupted period, etc.

● Take care about nearby people and objects.

Viewing 3D images can interfere with distance judgment, so you should take care about nearby people and objects when extending your arms or making sudden movements. Failure to do so creates the risk of material damage and personal injury.

● Use 3D glasses when viewing 3D images.

Watching 3D images without 3D glasses can cause eye fatigue. Always use the specified 3D glasses whenever viewing 3D images.

● You need to wear your glasses or any other devices you normally use for vision correction.

If you normally wear glasses or contact lenses, you should be wearing them when you watch 3D images with the 3D glasses. Failure to do so creates the risk of eye fatigue or abnormal vision.

E-6

+ 18 hidden pages