Casio SK650 User Manual
EFS
Dual Projection System
Dual Projection System
XJ-SK650
XJ-SK650
English
Setup Guide
Français
Guide d’installation
Español
Guía de configuración
Be sure to read the precautions in the “YA-S10 Setup
Guide” that comes with the Dual Projection System.
Be sure to keep all user documentation handy for future
reference.
To obtain the latest version of this manual visit the
website at the URL below.
http://world.casio.com/manual/projector/
Veuillez lire les précautions dans le « Guide d’installation
de la YA-S10 » fourni avec le Système de projection double.
Conservez la documentation à portée de main pour toute
référence future.
Pour obtenir la toute dernière version de ce manuel,
consultez le site à l’adresse suivante.
http://world.casio.com/manual/projector/
Asegúrese de leer las precauciones en la “Guía de
configuración de YA-S10” suministrada con el Sistema de
proyección dual.
Asegúrese de tener a mano toda la documentación del
usuario para futuras consultas.
Para obtener la versión más reciente de este manual,
visite nuestro sitio web en la siguiente URL.
http://world.casio.com/manual/projector/
Contents
XJ-SK650 Overview.................................... E-2
Unpacking ......................................................E-2
General Guide ................................................E-3
Getting Ready ............................................. E-4
Installation Location .......................................E-4
Wiring .............................................................E-7
Preparing the Remote Controllers..................E-8
Configuring the Initial Settings of
the Two Projectors ........................................ E-8
Configuring Initial Control Box Settings ...... E-10
Adjusting the Positions of
the Two Projectors ...................................... E-11
Product Specifications .............................E-15
Terms and Conventions
In this manual, the entire XJ-SK650 Dual Projection System (the two projectors, Geometric Correction
Box, and the cabinet in which everything is contained) is referred to as the “Projector System”.
User Documentation
This manual explains how to set up the XJ-SK650 Dual Projection System, and shows how to configure
the initial settings of the two projectors.
After completing the setup procedures described in this manual, use the YA-S10 Geometric Correction
Box (referred to as “Control Box” in this manual) to shape and adjust the projection images of the two
projectors. For information about how to do this, see the YA-S10 Setup Guide.
z For information about operating the Projector System after setting it up, refer to the YA-S10 User’s
Guide, which you can download from the website below.
http://world.casio.com/manual/projector/
z For information about individual projector operations, refer to the manuals below.
z DATA PROJECTOR Quick Start Guide (Booklet)
z “User’s Guide” (Download from the website above.)
z HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing, LLC.
z Other company and product names may be registered trademarks or trademarks of their respective
owners.
z The contents of this User’s Guide are subject to change without notice.
z Copying of this manual, either in part or its entirety, is forbidden. You are allowed to use this manual
for your own personal use. Any other use is forbidden without the permission of CASIO COMPUTER
CO., LTD.
z CASIO COMPUTER CO., LTD. shall not be held liable for any lost profits or claims from third parties
arising out of the use of this product or this manual.
z CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to loss of data
caused by malfunction or maintenance of this product, or due to any other reason.
z The sample screens shown in this manual are for illustrative purposes only, and may not be exactly
the same as the screens actually produced by the product.
E-1
XJ-SK650 Overview
Important!
The XJ-SK650 Projector System uses a Control Box to sync two projectors so their output looks and
acts as if it is coming from a single projector. A powerful collection of projected image shaping functions,
enables clear image projection not only onto a flat screen, but also onto curved and irregular surfaces.
Important!
Important!
z After the Projector System has been installed and adjusted, do not alter the cabinet position or
positions of the projectors inside the cabinet, the projector zoom ring settings, or the screen
position.
Any changes to the above will require re-adjustment of the Projector System.
z When installing the Projector System or when adjusting the cabinet, take care to avoid getting
your hands pinched under the cabinet or by door in the back of the cabinet.
Unpacking
Before getting into setup of the Projector System, take a few moments to make sure that all of the items
listed below are included.
z XJ-SK650 Setup Guide (This manual)
z Cabinet*
z Feet ×4 (for placement on a flat surface)
z Control Box (YA-S10)*
z Projectors (XJ-H2600) ×2*
z Control Box remote controller (YT-200)
z Control Box AC adapter and power cord
z Projector remote controller (YT-120)
z Projector power cords ×2
z Remote controller batteries (AAA-size, test use) ×4
z HDMI cables ×2
z RS-232C cables ×2
z Mini D-Sub Cable
z DATA PROJECTOR Quick Start Guide
z DATA PROJECTOR “Read this first” Sheet
z Projector (XJ-H2600) Warranty Certificates ×2
z Control Box (YA-S10) Warranty Certificate
* The Control Box and two projectors are installed in the cabinet at the factory.
E-2
General Guide
Zoom ring
Focus ring
XJ-SK650 Overview
Control Box
Projectors
Cabinet
E-3
Getting Ready
Installation Location
The Projector System can be placed on a flat surface or it can be ceiling mounted.
Placing the Projector System on a Flat Surface
When placing the Projector System on a flat
surface, you need to install the four feet on the
bottom of the cabinet.
Screw each of the feet into the holes at the
corners on the bottom of the cabinet.
After attaching the feet to the cabinet, place the cabinet onto a table, desk, or stand or other level and
firm surface, making sure you allow enough space around it. The nearby illustration shows how the
Projector System should be oriented relative to the screen to achieve optimum projection.
Screen
For information about the relationship between the
distance between the projectors and the screen and the
size of the projected image, see “Projection Distance
and Screen Size” in the projector User’s Guide. For
information about the User’s Guide, see “User
Documentation” (page E-1) in this manual.
E-4
Location Precautions
z Use a conveniently located power outlet that you can
reach easily when you need to unplug the power cord.
z Make sure there is nothing inside the area (within 30 cm
(11.8 inches) of the Projector System) indicated by the
nearby illustration. Take particular care to ensure that
there is nothing blocking the flow of air from the
projector intake-exhaust vents.
z Airflow from air conditioning equipment redirecting heat
being exhausted from the area around a projector lens
can cause heat ripples to appear in the projected
image. If this happens, adjust the airflow of the air
conditioning equipment or move the Projector System.
Getting Ready
Projector
Cabinet
Intake-exhaust
vents
30cm (11.8") 30cm (11.8")
30cm (11.8")
Intake-exhaust
vents
Intake vents
Intake-exhaust
vents
30cm (11.8")
E-5
Loading...