Casio QW 5513 Operation Manual

Download

Page 1

MA1708-EA

Operation Guide 5513

Contents

Basic Operations

Watch Face Items

Navigating Between Modes

Mode Overview

Using the Crown

Hand and Day Indicator Movement

Solar Charging

Using Mobile Link with a Mobile Phone

Getting Ready

A Installing applications

B Configuring Bluetooth Settings

C Pairing the watch with a phone

Auto Time Adjustment

Configuring World Time Settings

Configuring Timer Settings

Setting the Alarm

Adjusting Hand and Day Indicator Alignment

Watch Settings

Setting the Time/Date

Configuring Dual Time Settings

Swapping Your Current Location Time and

Dual Time Settings

Stopwatch

Measuring

Measuring a Split Time

Timer

Setting the Time

Using the Timer

Alarm

Configuring Alarm Settings

Turning an Alarm On or Off

Stopping an Alarm

Light

Turning On the Illumination Light

Phone Finder

Configuring Watch Settings

Returning the Watch to Its Factory Default

Settings

Changing the Home City Summer Time Setting

Checking the Watch Charge Level

Connection

Connecting with a Phone

Canceling a Connection with a Phone

Using the Watch in a Medical Facility or Aircraft

Unpairing

After Purchasing Another Phone

Adjusting Hand and Day Indicator Alignment

Moving to Another Time Zone

Other Information

Summer Time Switching

Supported Phone Models

Specifications

Mobile Link Precautions

Copyrights and Registered Copyrights

Troubleshooting

Page 2

③

⑥

⑦

⑧

⑤

②

①

④

Timer Mode

Stopwatch Mode

Calendar Mode

Alarm Mode

Any button

After connectionBefore connection

①

③

④

②

Battery level indicator

Charge level

Illumination

Operation Guide 5513

Basic Operations

This section provides an overview of the watch and its operations.

Note

●

The illustrations included in this operation guide have been created to facilitate explanation. An illustration may differ somewhat from the item it represents.

Watch Face Items

A / P marks

When configuring time settings in your current location (Home City), the second hand indicates whether it is an a.m. time or a p.m. time. “A”: AM “P”: PM

ALM mark

In the Alarm Mode, the mode hand points to “ALM”.

TMR mark

In the Timer Mode, the mode hand points to “TMR”.

STW mark

In the Stopwatch Mode, the mode hand points to “STW”

When the watch is connected with a phone, the second hand points to “C”.

C mark

Navigating Between Modes

Press (A) to cycle between modes.

●

Hold down (A) for about two seconds to enter the Calendar Mode.

●

Connecting with a Phone

Hold down (C) for about two seconds to establish a connection with a phone.

●

To disconnect, press any other button.

●

The watch cannot connect with a phone while a stopwatch measurement or timer operation is in progress.

Mode Overview

●

Calendar Mode

In this mode, the main hour and minute hands indicate the current time in your current location (Home City), while the dial hour and minute hands show

Current day of the week in your current

location (Home City)

Current second in your current location

(Home City)

Dual Time

Dual Time 24-hour hand

The hand points to the A-side for a.m. times, and to the P-side for p.m. times.

Battery level indicator :

Movement synchronized with Dual Time minutes.

Checking the Charge Level

Press (D) to have the Battery level indicator indicate the remaining battery level.

Checking the Charge Level

Swapping the Current Location Time and World Time

Hold down (B) for about three seconds.

Phone Finder

Hold down (D) for about 1.5 seconds.

another time (Dual Time).

R mark

When the with a phone, the second hand points to “R”.

watch is standing by for connection

Day of week In the Calendar Mode, the mode hand points to the current day of the week.

Alarm settings

In the Alarm Mode, the second hand indicates if the alarm is enabled or disabled. “ON”: Alarm enabled “OFF”: Alarm disabled

Page 3

①

②

③

④

Split/Reset

Start/Stop

Battery level indicator

①

②

③

④

Battery level indicator

Reset

Start/Stop

①

②

③

Battery level indicator

Enabling/ Disabling the Alarm

Illumination

Loosen

Crown

Normal timekeeping

Screw in

Operation Guide 5513

●

Stopwatch Mode

In this mode, the main hour and minute hands indicate the current time in your current location (Home City), while the other hands show elapsed time as measured by the stopwatch.

Stopwatch seconds

Stopwatch hours

Stopwatch minutes

Stopwatch 24-hour hand

The hand points to the A-side for hours 0 through 11, and to the P-side for hours 12 through 23.

Battery level indicator :

Movement synchronized with Stopwatch minutes.

●

Alarm Mode

In this mode, the main hour and minute hands indicate the current time in your current location (Home City), while the dial hour and minute hands show the alarm time setting.

Alarm enable/disable

The second hand will point to “ON” while the alarm is turned on, and to “OFF” while it is turned off.

Turning an Alarm On or Off

Alarm time

Alarm 24-hour hand

The hand points to the A-side for a.m. times, and to the P-side for p.m. times.

Battery level indicator :

Indicates alarm on/off status.

Using the Crown

The watch’s crown is a screw-in (screw lock) type. To use it towards you (leftwards) to loosen it.

●

Pulling Out and Pushing In the Crown

To perform a crown operation, pull it out to the first or second click and then rotate it. Do not pull the crown with too much force.

First click

Second click

Important!

the crown, you first need to rotate

●

Timer Mode

The main hour and minute hands indicate the current time. The second hand, and the small hour and minute hands indicate the current countdown time.

Timer seconds

Timer minutes

Timer hours

Timer 24-hour hand

The hand points to the A-side for hours 0 through 11, and to the P-side for hours 12 through 23.

Battery level indicator :

Movement synchronized with Timer minutes.

●

To prevent loss of water resistance and/or damage due to impact, be sure to screw

the crown in by rotating

it away from you as you push it in.

●

When pushing the crown back in, take care not to apply too much force.

Page 4

Mode hand

Day indicator

NOYES

Battery level indicator

Operation Guide 5513

●

Fast Forward/Fast Reverse

After pulling out the crown, rotating it quickly in succession

in either direction will cause the hands to move forward or back at high speed. While the hands are moving forward at high speed, quickly rotating the crown in succession again will increase the speed even further.

●

Stopping Fast Forward/Fast Reverse

Rotate the crown in the direction opposite that of the ongoing operation or press any button.

Note

●

If you do not perform any operation for about two minutes after pulling out the crown, crown operations will automatically become disabled. If that happens, push the crown back in and then pull it out again.

Hand and Day Indicator Movement

Solar Charging

This watch runs on power supplied from a rechargeable (secondary) battery that is charged by a solar panel. The solar panel is integrated into the face of the watch, and power is generated whenever the face is exposed to light.

Charging the Watch

●

When you are not wearing the watch, put it in a location where it is exposed to bright light.

While you are wearing the watch, make sure that its face (solar panel) is not blocked from the light

by the sleeve of your clothing. Power generation efficiency is reduced even when the face of the watch is blocked only partially.

Checking the Charge Level

●

You can determine the watch’s current charge level by checking the Battery level indicator.

Hold down (A) for about two seconds.

This will cause the watch to enter the Calendar Mode.

Press (D).

This will cause the Battery level indicator to show the current charge level.

Low Battery

Good (medium charge)

●

Mode Hand and Day Indicator Movement

Changing the day setting of the watch will also cause the mode hand to move.

●

Day

●

It can take anywhere from about 15 to 30 seconds for

the day indicator to change after timekeeping reaches midnight. The mode hand moves as the day indicator changes.

●

The day indicator will not change while a time measurement operation is in progress in the Stopwatch Mode.

Important!

●

Depending on light intensity and local conditions, the watch may become hot to the touch when exposed to light for charging. Take care to avoid burn injury after charging. Also, avoid charging the watch under high-temperature conditions like the ones described below.

ー

On the dashboard of a vehicle parked in the sun

ー

Near an

incandescent light bulb or

other source of heat

ー

Under direct sunlight or in other hot areas for long periods

Good (high charge)

Page 5

Second hand

Operation Guide 5513

Remaining Charge and Dead Battery

●

You can determine if the charge level is low by checking the hand movement. Functions become disabled as battery power goes low.

Important!

●

Should battery go low or go dead, expose the face

(solar panel) to light

as soon as possible.

Note

●

Exposing the watch the battery goes dead will cause the second hand to revolve counterclockwise until it stops at second 57. This indicates charging has started.

Low Battery Power

The second hand jumps at two-second intervals.

Dead Battery

All hands and the day indicator are stopped.

face to light after

Charging Time Guidelines

●

The table below shows guidelines for approximate charging times.

Required Charging Time for 1-day Use

Light Level (Lux)

Approximate

Charging Time

50,000 8 minutes 10,000 30 minutes

5,000 48 minutes

500 8 hours

Time Required to Achieve Next Charge Level

●

Sunny day, outdoors (50,000 lux)

Dead battery n Medium charge

Medium charge n High charge

High charge n Full charge

●

Sunny day, near a window (10,000 lux)

Dead battery n Medium charge

Medium charge n High charge

High charge n Full charge

●

Overcast day, near a window (5,000 lux)

Dead battery n Medium charge

Medium charge n High charge

High charge n Full charge

●

Indoor fluorescent lighting (500 lux)

Dead battery n Medium charge

Medium charge n High charge

High charge n

Full

charge

2 hours

16 hours

5 hours

61 hours

17 hours

8 hours

99 hours

27 hours

85 hours

Power Saving

●

Leaving the watch in a dark location for about one hour between the hours of 10 p.m. and 6 a.m. will cause the second hand to stop, and the watch to

enter Level 1 power saving. If the watch is left in this condition for six or seven days, all hands will stop at 12 o’clock and the watch will enter Level 2 power saving.

Level 1 :

Second hand stops to save power.

Level 2 :

The following operations are stopped to save power:

all hand

movement (excluding the day indicator), Bluetooth connection, and alarm alerts.

Recovering from Power Saving Operation

Press any button or place the watch in a welllit area to recover from power saving.

Using Mobile Link with

a Mobile Phone

While there is a Bluetooth connection between the watch setting is adjusted automatically in accordance with the phone’s time setting. You can also change the watch’s time settings.

Note

●

This function is available only while G-SHOCK Connected is running on the phone.

●

This section describes watch and phone operations.

X : Watch operation Y : Phone operation

and phone, the watch time

Note

●

The charge level is indicated by the Battery level indicator.

Checking the Charge Level

●

charging time

Actual local charging environment.

depends on the

Getting Ready

A Installing applications

To use the watch with a phone, first tap one of the links below and install the “G-SHOCK Connected”

●

iOS (iPhone) Users

app on the phone.

https://itunes.apple.com/us/app/g-shockconnected/id1179983841?mt=8

●

AndroidTM

(GALAXY, etc.) Users

https://play.google.com/store/apps/details? id=com.casio.gshockconnected

Page 6

C mark

12:30

Operation Guide 5513

B Configuring Bluetooth Settings

Enable the phone’s Bluetooth.

Note

●

For details about setting procedures, see your phone documentation.

C Pairing the watch with a phone

Before you can use the watch in combination with a phone, you first need to pair them.

Move the phone

(within one meter of) the watch.

Y On the Home Screen, tap the “G- SHOCK Connected” icon.

Y Perform the operation shown on the screen of the phone to be paired with.

●

If a pairing prompt message appears, perform the operation shown on the phone screen.

●

When pairing starts, the second hand

move

will complete, the second hand will move to “C”.

Auto Time Adjustment

to be paired with close to

12 o’clock. When pairing is

Important!

●

Note that the watch will not perform auto time adjustment if it enters the Calendar Mode while

any one of the

conditions below exists.

ー

While a stopwatch elapsed time measurement or timer countdown operation is in progress

ー

Battery power is low.

ー

Watch is in Level 2 power saving.

ー

While it is too far away from its paired phone

ー

When communication is not possible due to radio interference, etc.

ー

While the phone is updating its system

Note

●

If the watch does not indicate the correct time even with a phone, correct the hand and date indicator positions.

Adjusting Hand and Day Indicator

Alignment

●

If there is with G-SHOCK Connected, its time will also be synchronized automatically.

●

The watch will connect with the phone and perform auto time adjustment at around 12:30 a.m., 6:30 a.m., 12:30 p.m. and 6:30 p.m. The connection is automatically terminated after auto time adjustment is complete.

if is able to connect

a World Time City specified

●

Triggering Immediate Time Adjustment

The watch will synchronize its time setting to that of the phone immediately when they are connected with each other. Whenever you want to adjust the watch’s time setting based on your phone's time, perform the procedure below to connect with a phone.

X Press (C).

This causes the second hand to move to “R”. When the watch connects with a phone, the second hand will normally

“C” and then the watch’s time

move to setting will synchronize with the phone’s time.

●

The watch will disconnect from the phone automatically after time synchronization is complete.

Configuring World Time Settings

Specifying a World Time City with G-SHOCK Connected causes the city’s time to be indicated by the Watch settings can be configured for auto summer time switching for the World Time City.

small hour and minute hands.

The watch can be set to adjust its time setting automatically each day

in accordance with the

phone time.

●

Using Auto Adjust

Your watch adjusts its time setting four times a day according to a preset schedule. If you leave your watch

in the Calendar Mode, it will perform the adjustment operation automatically as you go about your daily life, without any operation required by you.

●

Summer Time

Once the watch is connected with a phone and its time is adjusted with the phone time, its Home City time and World Time will automatically switch between standard time and summer time as required, even if the watch is no

Summer Time Switching

●

Adjusting the time setting manually with a

longer connected with the phone.

watch operation will cancel auto standard time/summer time switching.

●

A G-SHOCK Connected screen shows information about summer time periods.

Note

●

G-SHOCK Connected World Time lets you select from among approximately 300 cities as the World Time City.

Page 7

World Time hour (24-hour)

World Time hour and minute

After swappingBefore swapping

World Time

World TimeHome Time

Home Time

Operation Guide 5513

●

Selecting a World Time City

Y On the Home Screen, tap the “G- SHOCK Connected” icon.

X Hold down the (C) button for about 2 seconds.

●

The second hand

will move to “R”. Keep (C) depressed until the second hand starts moving again and then stops at “R”.

●

The second hand will move from “R” to “C” when a connection is established between the watch and phone.

Y Perform the operation shown on the phone screen. The

World Time setting will

be reflected on the watch.

The dial hour and minute hands, and the small 24-hour hand indicate the current time in the selected city and time zone.

●

You can determine whether a World Time is a.m. or p.m. by checking the position of the small 24-hour hand.

●

Configuring the Summer Time Setting

Y On the Home Screen, tap the “G- SHOCK Connected

Hold down the (C) button for about 2

” icon.

seconds.

●

The

second

will move to “R”. Keep

hand (C) depressed until the second hand starts moving again and then stops at “R”.

●

The second hand will move from “R” “C” when a connection is established between the watch and phone.

Y Perform the operation shown on the phone screen to configure the summer time setting.

Note

●

When “Auto” is selected for standard/summer time switching, the watch will switch between standard time and summer time automatically. Do not need to change the time changes between summer time and standard time. Even if you are in an area that does not observe summer time, you can leave the watch’s summertime setting as “Auto”.

●

Changing the time setting manually with a watch operation will cancel auto standard time/summer time switching.

●

A G-SHOCK Connected screen shows information about summer time periods.

setting manually for

●

Swapping Your World Time and Home Time

Y Tap the “G-SHOCK Connected” icon.

X Hold down the (C) button for about 2 seconds.

●

The

second

will move to “R”. Keep

hand (C) depressed until the second hand starts moving again and then stops at “R”.

●

The second hand will move from “R” to “C” when a connection is established between the watch and phone.

Y Perform the operation shown on the phone screen to swap your Home Time with your World Time.

Note

●

Auto time adjustment is not performed for 24 hours after swapping of the Home Time and World Time.

Page 8

After disconnectionConnected

Operation Guide 5513

Configuring Timer Settings

Y On the Home Screen, tap the “G- SHOCK Connected” icon.

Hold down the (C) button for about 2

seconds.

●

second

The (C) depressed until the second hand starts moving again and then stops at “R”.

●

The second hand will move from “R” to “C” when a connection is established between the watch and phone.

Y Perform the operation shown on the phone screen to configure the timer time setting.

will move to “R”. Keep

hand

Adjusting Hand and Day Indicator Alignment

If the hands and/or date indicator are out of alignment even though auto time adjustment is being performed, use G-SHOCK Connected to adjust them.

Y On the Home Screen, tap the “G- SHOCK Connected” icon.

X Hold down the (C) button for about 2 seconds.

●

The second hand (C) depressed until the second hand starts moving again and then stops at “R”.

●

The second hand will move from “R” to “C” when a connection is established between the watch and phone.

will move to “R”. Keep

X Hold down the (A) button for about 2 seconds.

This will cause the watch to enter the Calendar Mode.

X Hold down the (D) button for about 1.5 seconds until the second hand points to “R”.

The second hand will move to “C” when a connection is established between the watch and phone, and then the phone’s ringtone will sound.

●

It will take a few seconds before the phone tone sounds.

X Press any button to stop the tone.

●

You can press

any watch button to stop the phone tone only during the first 30 seconds after it starts to sound.

Setting the Alarm

Y On the Home Screen, tap the “G- SHOCK Connected” icon.

Hold down the (C) button for about 2

seconds.

●

second

The (C) depressed until the second hand starts moving again and then stops at “R”.

●

The second hand will move from “R” “C” when a connection is established between the watch and phone.

Y Perform the operation shown on the phone screen to configure alarm time settings.

will move to “R”. Keep

hand

Y Perform the operation shown on the phone screen to correct hand and date indicator alignment.

Configuring Watch Settings

You can use G-SHOCK Connected to specify the amount of time until a Bluetooth

Phone Finder

connection is automatically terminated, to enable or disable the watch operation tone,

You can use phone finder to trigger a tone on

and to configure other settings.

the phone to make it easy to find. The tone is

forced to sound even if the phone is in the manner mode.

Important!

●

Do not use this function in areas where phone call tones are restricted.

●

The tone sounds at a high volume. Do not use this function when listening to phone output over earphones.

X If the watch is connected with a phone,

Y On the Home Screen, tap the “G-

SHOCK Connected” icon.

X Hold down the (C) button for about 2 seconds.

●

second hand

The

will move to “R”. Keep (C) depressed until the second hand starts moving again and then stops at “R”.

●

The second hand will move from “R” to “C” when a connection is established between the watch and phone.

press any button to terminate the connection.

Y Select the setting you want to change and then perform the operation shown on the phone screen.

Page 9

Second hand

After disconnectionConnected

Operation Guide 5513

Returning the Watch to Its Factory Default Settings

Using G-SHOCK Connected to reset the watch returns to the settings below.

●

Stopwatch elapsed time: 0 hours, 0 minutes, 0 seconds

●

Countdown

●

Alarm

ー

Alarm time: 12:00 midnight

ー

Alarm setting: Off

●

Mute setting: Off

●

Connection time: 3 minutes

●

Auto adjust: Off

X Pull out the crown to the second click.

X Hold down (C) for about 5 seconds.

Resetting watch settings causes the second hand to move to 12 o’clock.

Timer

0 hours, 10 minutes

time:

Checking the Watch Charge Level

Use the procedure below to check the current charge level with G-SHOCK Connected.

Y On the Home Screen, tap the “G- SHOCK Connected” icon.

Hold down the (C) button for about 2

seconds.

●

second

The (C) depressed until the second hand starts moving again and then stops at “R”.

●

The second hand will move from “R” to “C” when a connection is established between the watch and phone.

Y Use G-SHOCK Connected charge level.

will move to “R”. Keep

hand

to check the

Important!

●

The watch cannot connect with a phone while a stopwatch time measurement or timer countdown operation is in progress.

●

If you have problems establishing a connection, it could mean that GSHOCK Connected is not running on the phone.

On the phone’s home screen, tap the “G-SHOCK Connected” icon. After the app starts up, hold down the watch’s (C) button for about 2 seconds.

Note

●

The connection will be terminated if you

not

perform any operation on

do the watch or phone for a fixed amount of time. To specify the connection limit time, perform the following operation with G-SHOCK Connected: “Watch

settings”n“Connection time”. Next, select a setting of 3 minutes, 5 minutes, or 10 minutes.

Push the crown back in.

Changing the Home City Summer Time Setting

Y On the Home Screen, tap the “G- SHOCK Connected” icon.

Hold down the (C) button for about 2

seconds.

●

second

The (C) depressed until the second hand starts moving again and then stops at “R”.

●

The second hand will move from “R” to “C” when a connection is established between the watch and phone.

will move to “R”. Keep

hand

Connection

Connecting with a Phone

This section explains how to establish a Bluetooth connection between paired with the watch.

●

If the watch

is not paired with the phone you

want to connect with, perform the procedure under “C Pairing the watch with a phone” to pair them.

Move the phone

close to (within one meter

of) the watch.

X While the second “C”, hold down the (C) button for about 2 seconds.

●

The second hand (C) depressed until the second hand starts moving again and then stops at “R”.

●

The second hand will move from “R” to “C” when a connection is established between the watch and phone.

a phone that is

hand is not pointing to

will move to “R”. Keep

Canceling a Connection with a Phone

Pressing any button terminates the Bluetooth connection and returns normal operation.

the second hand to its

Y Perform the operation shown on the phone screen to

change the summer time

setting.

Page 10

After disconnectionConnected

Crown

C mark

Operation Guide 5513

Using the Watch in a Medical Facility or Aircraft

Whenever you are in a hospital, on an aircraft, or in any other location where auto signal receive or connection problems, you can perform the procedure below to disable it. To re-enable auto time adjustment, perform the same operation again.

Y On the Home Screen, tap the “G- SHOCK Connected” icon.

Hold down the (C) button for about 2

seconds.

●

second

The (C) depressed until the second hand starts moving again and then stops at “R”.

●

The second hand will move from “R” to “C” when a connection is established between the watch and phone.

Y Perform the operation shown on the phone screen to enable or disable auto time adjustment.

with a phone may cause

will move to “R”. Keep

hand

Unpairing

X If the watch is connected with a phone, press any button to terminate the connection.

Y On the Home Screen, tap the “G- SHOCK Connected” icon.

Y Perform the operation shown on the phone screen to unpair.

Note

●

If you are unable to re-pair the watch with a phone after unpairing them, use the procedure below to delete pairing information from the watch and then perform the pairing operation again.

A X Pull out the crown to the second click.

B X Hold down (D) for about 5 seconds.

This causes the second hand to perform one revolution pairing information.

C X Push the crown back in.

and deletes the

After Purchasing Another Phone

You need to perform the pairing operation whenever you want to establish a Bluetooth connection with a phone for the first time.

Move the phone

to be paired with close to

(within one meter of) the watch.

Y On the Home Screen, tap the “G- SHOCK Connected” icon.

Y Perform the operation shown on the screen of the phone to be paired with.

●

If a pairing prompt message appears, perform the operation shown on the phone screen.

●

When pairing starts, the second hand will point to complete,

“R”. When pairing is

second hand will move to

the

“C”.

Note

●

If your previous phone is near the watch while you a new phone, the watch will pair with the previous phone, which makes it impossible to pair with the new phone. If this happens, delete the previous pairing information from the watch. Also, unregister the watch from the G-SHOCK Connected app of the phone you will no longer connect with.

Unpairing

are trying to pair with

Page 11

Crown

Minutes

Hours

DayMonth

5070

4080

Year (10’s digit)

Year (one’s digit)

Dual Time

Dual Time 24-hour

Crown

Dual Time 24-hour hand

Dual Time minute hand

Dual Time hour hand

Operation Guide 5513

Watch Settings

Use the procedure below to configure current location time and Dual Time settings manually.

Getting ready

Perform this procedure in the Calendar Mode.

Navigating Between Modes

Setting the Time/Date

While the watch is connected to a phone, it will automatically adjust its day and time settings to those of the phone. If the watch is not connected to a phone, use the procedure below to adjust its day and time settings.

Pull out the crown to the second click.

This causes the second hand to move to “A” of the watch’s current time setting is a.m., or “P” if it is p.m., and enables the hour and minute setting operation.

Press (B) to change the month.

Rotate the crown to change the day.

Press (A).

This enables the year 10’s digit setting operation.

Rotate the crown to change the year 10’s

digit.

Press (A).

This enables the year one’s digit setting operation.

Configuring Dual Time Settings

Dual Time lets you keep track of the current time in another time zone in addition your current location time.

Pull out the crown to the first click.

This causes the second hand to move to 12 o’clock.

Rotate the crown

setting.

●

You can set increments.

to change the Dual Time

the Dual Time in 15-minute

Rotate the crown to adjust the hour and

minute settings.

●

The Dual Time setting also changes in accordance with the current time setting. Crown operation is disabled while the Dual Time hour and minute hands are moving.

Press (A).

This enables the month and day setting operation.

Rotate the crown

to change the year one’s

digit.

On a time signal at the top of a minute,

10.

push the crown back in.

Note

●

The day of the week is set automatically in accordance year, month, and day settings.

with the

Push the crown back in.

Page 12

After swappingBefore swapping

Dual Time

Current location time

Stopwatch Mode

24-hour

Minutes

Hours

Seconds

Stop

Resume

Stop

Start

24-hour

Minutes

Hours

Seconds

Stop

Split

Start

Timer Mode

Crown

Seconds

MinutesHours

24-hour

Operation Guide 5513

Swapping Your Current Location Time and

Dual Time

Settings

You can swap the time in your current location with the Dual Time by holding down (B) for about three seconds.

●

Pressing (B) will cause illumination to turn on. Keep the button depressed for three seconds.

Note

●

If you are using the small hour and minute hands for time in your current location will be swapped with Dual Time. Dates are not swapped.

Dual Time, only the

Measuring

Use the operations below to measure

elapsed time.

Press (D) to reset the elapsed time to all

zeroes.

Press (A) three times to return to the

Calendar Mode.

Note

●

Up to 100

split times can be measure during a single elapsed time operation.

Timer

The timer counts down from a start time specified by you. A beeper sounds when the end of the countdown is reached.

●

The beeper is below.

ー

When battery power is low

Getting ready

Perform this procedure in the Timer Mode.

Navigating Between Modes

muted in the cases described

The stopwatch can measure elapsed time up to 23 hours, 59 minutes, 59 seconds.

Note

●

If an ongoing elapsed time measurement operation continues for 24 hours, the measurement will stop and the stopwatch will reset to all zeros automatically.

Getting ready

Perform this procedure in the Stopwatch Mode.

Navigating Between Modes

Stopwatch

Measuring a Split Time

Setting the Time

Pull out the crown to the first click.

Rotate the crown to change the

countdown start time setting.

●

The countdown start time can be set in 1-minute units up to 24 hours.

Use the operations below to measure

elapsed time.

●

Each press of (D) causes the elapsed time up to that point (split time) to be indicated for 5 seconds.

Push the crown back in.

Note

●

Press (D) to reset the elapsed time to all

zeroes.

Press (A) three times to return to the

Calendar Mode.

You can set a countdown start time of 24 hours

by aligning the small 24-

hour hand with 24.

Page 13

Alarm Mode

24-hour

Crown

Minutes

Hours

Alarm on

Alarm offAlarm on

Calendar Mode Alarm Mode

Operation Guide 5513

Using the Timer

Press (B) to start the countdown.

A beeper will sound for 10 seconds to let you know when

the end of a countdown is

reached.

●

To pause an

ongoing countdown, press (B). To reset a paused countdown to the start time, press (D).

Press any button to stop the tone.

Press (A) twice to return to the

Timekeeping Mode.

Alarm

The watch will beep when the alarm time is reached.

●

beeper is

The below.

ー

When battery power is low

ー

When watch is at Level 2 power saving

l Power Saving

Getting ready

Perform this procedure in the Alarm Mode.

Navigating Between Modes

muted in the cases described

Configuring Alarm Settings

Pull out the crown to the first click.

This turns on the alarm.

Rotate the crown

to change the alarm time

setting.

Push the crown back in.

Press (A) once to return to the Calendar

Mode.

Note

●

A beeper will sound for 10 seconds to let you know when the alarm time is reached.

Turning an Alarm On or Off

Press (D) to toggle the alarm between on and off.

Light

The watch has an LED light that you can turn on for reading in the dark.

Getting ready

Perform this procedure in the Calendar Mode or Alarm Mode.

Navigating Between Modes

Turning On the Illumination Light

Pressing (B) turns on the light.

●

The LED light alarm starts to sound.

●

The LED light is disabled while the hands are moving at high speed.

will turn off automatically if the

Stopping an Alarm

While the alarm is sounding, press any button to stop it.

Page 14

Second hand

Minute hand Hour hand

Battery level indicator

Small Hour Hand (24-hour)

Small minute hand

Small hour hand

Mode hand

Day indicator

Destination time

Current time

After swappingBefore swapping

Destination time

Operation Guide 5513

Adjusting Hand and

Day Indicator

Alignment

Strong magnetism or impact can cause the hands and/or the day indicator to go out of alignment. If this happens, adjust hand and day indicator alignment.

Adjusting Hand and Day Indicator Alignment

Pull out the crown to the first click.

Hold down (D) for about five seconds.

This causes the second hand to perform one full revolution and enables adjustment of second hand alignment.

Rotate the crown until the Battery level

indicator appears as shown in the nearby illustration.

Press (A).

This enables adjustment of small hour hand, small minute hand, and small 24hour hand alignment.

Rotate the crown to align the small hour

and minute hands

with 12 o’clock, and the

small 24-hour hand with 24.

Moving to Another Time

Zone

Use the procedure below to easily change day

time settings

and location.

●

Before Boarding

Configure the World Time (Dual Time) to

the current time at your destination.

Configuring World Time Settings

Configuring Dual Time Settings

Disable auto time adjustment.

of the watch to a destination

Rotate

the

crown

to align the second hand

with 12 o’clock.

Press (A).

This enables adjustment of hour and minute hand alignment.

Rotate the crown to align the hour and

minute hands with 12 o’clock.

Press (A).

This enables adjustment of Battery level indicator alignment.

Press (A).

10.

This enables adjustment of mode hand alignment.

Rotate the crown to align the mode hand

11.

with “S”.

Press (A).

12.

This enables adjustment of day indicator alignment.

Rotate the crown to align “1”

13.

in the center

of the day indicator.

●

The mode hand moves in conjunction with crown rotation. Align the mode hand with “S”.

Using the Watch

in a Medical Facility or

Aircraft

●

After Arriving

Swap the origin time zone time with the

destination time zone time.

Swapping Your Current Location Time

and Dual Time Settings

Enable auto time adjustment.

Using the Watch

in a Medical Facility or

Aircraft

Push the crown back in.

14.

Page 15

Operation Guide 5513

Other Information

This section provides non-operational information you also need to know. Refer to this information as required.

Summer Time Switching

●

Connecting with a Phone to Switch

After the watch is connected with a phone, summer time switching World Time is performed in accordance with the G-SHOCK Connected setting (Auto/ON/ OFF) as described below.

Auto :

After the watch is connected with a phone, summer time is displayed for the current location time or World Time when it is within the summer time period. Otherwise standard time is displayed.

ON :

The watch always displays summer time.

OFF :

The watch always displays standard time.

●

Auto Summer Time Switching

When the watch is connected to a phone, it is sent summer time period information for your Home City. If there is a World Time City specified with G-SHOCK Connected, information G-SHOCK Connected summer time setting is “Auto”, the watch will automatically keep track of the summer time period and perform summer time switching automatically, even if it is not connected with the phone.

for that

Supported Phone Models

For information about supported phone models, visit the CASIO Website.

http://world.casio.com/os_mobile/wat/

of Home City time and

city will also be sent. If the

Specifications

Accuracy at normal temperature :

±15 seconds per adjustment by communication with a phone is not possible.

Timekeeping :

Hour and minute (move at 10-second intervals), second, day (2000 to 2099 full auto calendar), day of the week

Dual Time :

Hour, minute, swapping with Home City time

Stopwatch :

Measuring unit: 1 second Measuring capacity: 23:59’59” (24 hours) Measurement functions: Elapsed time, split times

Timer :

Measuring unit: 1 second Countdown range: 24 hours Setting unit: 1 minute Time up: 10-second beeper

Alarm :

Setting units: Hours, minutes Beeper: 10 seconds

Mobile Link :

Auto Time Correction

Time setting adjusted automatically at preset time.

One-touch Time Correction

Manual connection and time adjustment

Phone finder

Watch operation sounds the alert sound of the mobile phone.

World Time

Current time for a selection of approximately 300 cities Home Time/World Time swapping

Auto Summer Time Switching

Automatic switching between standard

time and summer time. Timer Settings Alarm Settings Hand alignment correction Data Communication Specifications

Bluetooth

Frequency Band: 2400MHz-2480MHz

Maximum Transmission: 0 dBm (1 mW)

Communication range: Up to 2 meters

(depends on environment)

month average when time

Other :

Power saving, battery level indicator, LED light (Super Illuminator, afterglow)

Power Supply :

Solar panel and one rechargeable battery

Approximate Battery Life :

Approximately 5 months Conditions

Auto Time Adjustment: 4 times/day Alarm: Once (10 seconds)/day Illumination: Once (1.5 seconds)/day Power Saving: 6 hours/day

Mobile Link Precautions

●

Legal Precautions

●

This watch complies with or has received approval under the radio laws of various countries and geographical areas. Using this watch in an area where it does not comply with or has not received approval under applicable radio laws may be a criminal offense. For Website.

http://world.casio.com/ce/BLE/

●

Use of this watch inside of aircraft is restricted under the aviation laws of each country. Be sure airline personnel.

●

Precautions when using Mobile Link

●

When using this watch in combination with a phone, keep the watch and phone close to each other. A range of two meters is recommended as a guideline, but the local environment (walls, furniture, etc.), the structure of a require a much closer range.

●

This watch can (electrical devices, audio-visual equipment, office equipment, etc.) In particular, it can be affected by operation of a microwave oven. The watch may not be able to communicate normally with a phone if a microwave oven is operating nearby. Conversely, this watch may cause noise in radio reception and the video image of a TV.

●

Bluetooth of this watch uses the same frequency band (2.4 GHz) as wireless LAN devices, and use of such devices in close proximity of this watch may result in radio interference, slower communication and noise for the watch and the wireless LAN device, or even communication failure.

details, visit the CASIO

to follow the instructions of

building, and other factors may

be affected by other devices

speeds

Page 16

After disconnectionConnected

Operation Guide 5513

●

Stopping Radio Wave Watch

The watch is emitting radio waves whenever the second hand is pointing to “C” (Bluetooth connected) or “R” (Bluetooth connection standby). Even if the second hand is not pointing at “C” or “R”, the watch will automatically attempt to

with a phone four times a day to adjust

connect its time settings.

When in a hospital, on an aircraft, or in any other area where

the use of radio waves is not allowed, use the operations below to stop radio wave generation.

●

Stopping Radio Wave Generation Press any button connection.

●

Disabling Auto Time Adjustment Configure G-SHOCK Connected disable synchronization between the watch and phone.

Using the Watch in a Medical Facility or

Aircraft

Copyrights and Registered Copyrights

●

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by CASIO Computer Co., Ltd. is under license.

●

iPhone and App Store are registered trademarks of Apple Inc. in the United States and other countries.

●

iOS is a trademark or registered trademark of Cisco Systems, Inc.

●

GALAXY, GALAXY Note, and GALAXY S are registered trademarks of Samsung Electronics Co., Ltd.

●

Android and Google PlayTM are registered trademarks of Google Inc.

●

Other company names and product names used herein are trademarks or registered trademarks of their respective companies.

Emission by This

to terminate the Bluetooth

settings to

Troubleshooting

I can’t pair the watch with a phone.

I’ve never been able to establish a

(pairing) connection between the watch and phone.

Are you using a supported phone model?

Check if the phone model and its operating system are supported by the watch. For information about supported phone models, visit the CASIO Website.

http://world.casio.com/os_mobile/wat/

Did you install G-SHOCK Connected on your phone?

G-SHOCK Connected needs to be installed on your phone in order to connect with the watch.

A Installing applications

Are your phone’s Bluetooth settings configured correctly?

Configure the phone’s Bluetooth settings. For details about setting procedures, see your phone documentation.

iPhone Users

●

“Settings”n“Bluetooth”n On

Android Users

●

Enable Bluetooth.

Is a stopwatch or timer operation being performed?

The watch cannot pair with a phone while a stopwatch time measurement operation is in progress. Stop the measurement operation and then pair with a phone.

Other than the above.

Some phones need to have BT Smart disabled to use G-SHOCK Connected. For details about setting procedures, see your phone documentation.

On the Home Screen, tap: “Menu” n “Settings” n “Bluetooth” n “Menu” n “BT Smart settings” n “Disable

”.

I can’t reconnect the watch and phone.

The watch will

phone after they are disconnected.

Is G-SHOCK Connected running?

The watch cannot re-connect with the phone unless G-SHOCK Connected is running on the phone. On the phone’s Home Screen, tap the “G-SHOCK Connected” icon. down the CONNECT button (C) for about 2 seconds.

Have you tried turning your phone off and then back on again?

Turn the phone off and then back on, and then tap the Next, on the watch, hold down the CONNECT button (C) for about 2 seconds.

Is the watch’s battery charged sufficiently?

Connection with a phone is not possible while

the

and then connect with the phone.

Is a stopwatch or timer operation being performed?

The watch cannot connect with a phone while a stopwatch time measurement operation is in progress. Exit the watch’s Airplane Mode. Then hold down the CONNECT button (C) for about 2 seconds.

not re-connect with the

Then on the watch, hold

“G-SHOCK Connected” icon.

charge

is low. Charge the watch

Page 17

Operation Guide 5513

I changed the phone’s Bluetooth

from enabled to disabled, and now I can’t connect anymore.

On the phone, re-enable Bluetooth, and then go to the Home Screen and tap the “GSHOCK Connected” hold down the CONNECT button (C) for about 2 seconds.

icon. Next, on the watch,

Changing to a Different Phone Model

Connecting the current watch to

another phone.

Pair the watch with the phone.

After Purchasing Another Phone

Auto Time Adjustment

When does the watch sync its time

setting with the phone?

The watch will connect with the phone and perform auto time a.m., 6:30 a.m., 12:30 p.m. and 6:30 p.m. The connection is automatically terminated after auto time adjustment is complete.

adjustment at around 12:30

I can’t connect after turning off the

phone.

Turn on the phone and tap the “G-SHOCK Connected” icon. Then on the watch, hold down the CONNECT button (C) for about 2 seconds.

Phone-Watch Connection

I can’t establish a connection

between the phone and watch.

Have you tried turning your phone off and then back on again?

Turn on the phone and tap the “G-SHOCK Connected” icon. Then on the watch, hold down the CONNECT button (C) for about 2 seconds.

Phone Finder

Phone Finder does not work.

Are the phone and watch disconnected?

Phone Finder does not work during Bluetooth connection.

Is G-SHOCK Connected running?

Phone Finder will not work unless GSHOCK Connected is running. On the Home Screen, tap the “G-SHOCK Connected” icon to start up the app.

Other than the above.

If the phone does not respond after a few seconds, it could mean that the phone is located too far a different location and try again.

It takes some time before the phone

responds.

The phone will emit a tone when a connection is established with the watch, which takes a few seconds.

The phone cannot be found even

when it is close to the watch.

Since communication is performed using radio waves, the the phone even if it is within two meters. Certain environments may make the allowable communication range very short.

from the watch. Change to

watch may not be able to find

Auto time adjustment is performed,

but the time setting is not correct.

Is auto time adjustment not being performed according to its normal schedule?

Note that auto time adjustment is not performed for 24 hours after swapping of the Home Time and World Time, or after the time setting is adjusted manually on the watch. Auto time adjustment will resume 24 hours operations is performed.

Is auto time adjustment enabled?

Auto time adjustment will not be performed at the scheduled times unless it is enabled. Establish a connection between the watch and phone, and then use G-SHOCK Connected time adjustment.

Using the Watch

Aircraft

Is the watch’s battery charged sufficiently?

Connection with a phone is not possible while the charge

Is a stopwatch or timer operation being performed?

after either of the above

to enable auto

in a Medical Facility or

is low. Charge the watch.

Has the watch been re-paired with the phone?

After unpairing the watch and phone, repair them again.

Unpairing

If you are unable to establish a connection...

Delete the pairing information from the watch, and then re-pair the watch and phone.

See "Unpairing".

Auto time adjustment will not start at the scheduled times if a stopwatch time measurement operation is in progress. Stop the measurement operation.

Time is not displayed correctly.

The phone’s time setting may be incorrect because it is unable to connect with its network due to being out of range, etc. If this happens, connect the phone to its network and then adjust the time setting.

Page 18

Operation Guide 5513

World Time

The time for a World Time City is not

correct.

The summer time start date and time, end date and time, or other rules were changed by authorities.

After swapping your current location

(Home City) time with the World Time, the World correct.

Use the G-SHOCK Connected to specify a World Time City.

Alarm

The alarm does not sound.

Is the watch’s battery charged?

Keep the watch exposed to light until it recharges sufficiently.

Solar Charging

The crown is pulled out.

The alarm will not sound while the crown

pulled

is normal position.

Is the alarm enabled?

Enable the alarm.

out.

Turning an Alarm On or Off

Time City time is not

Push the crown back in to its

Hand Movement and Indications

I don’t know what mode the watch is

in.

You tell which mode the watch is currently in by checking the position of the mode hand.

Navigating Between Modes

●

Hold down (A) for about two seconds to enter the Calendar Mode.

Why can’t I perform any button

operations while high-speed hand movement is in progress?

Except for the mode navigation button, button operation is disabled while high-speed hand movement is changed, etc. Wait until the hands stop moving before performing button operations.

Battery power is low. Keep the watch exposed to light until it recharges sufficiently.

Solar Charging

The battery is dead. Keep the watch exposed to light until the battery recharges sufficiently.

Solar Charging

This is due to one of the reasons below, and does not indicate malfunction. Simply wait until normal hand movement resumes.

●

The watch is recovering from a power saving state.

Power Saving

●

Establish a connection with the phone and correct the time setting.

Auto Time Adjustment

progress after a watch setting

The second hand is jumping at twosecond intervals.

All hands are stopped at 12 o’clock and buttons do not work.

The hands suddenly start moving at high speed.

Hands are stopped and buttons do

not work.

The watch is in the charge recovery mode. Wait until the recovery process is complete (for about 15 more quickly if you place it in a brightly lit location.

Strong magnetism or impact can cause the hands and/or the indicator to go out of alignment. Adjust hand and/or day indicator alignment.

Adjusting Hand and Day Indicator

Alignment

●

Check to align the hands and/or day indicator manually.

Adjusting Hand and Day Indicator

Alignment

Is the date setting being updated?

For information about how the day changes, see the section below.

Other than the above.

The day indicator is not aligned correctly. Adjust day indicator alignment.

●

minutes). The watch will recover

The indicated current time and date are not correct.

the

information

The time setting is correct, but the day indicator is between days.

Hand and Day Indicator Movement

Adjusting Hand and Day Indicator Alignment

Check the information below to find out how to align the hands and/or day indicator manually.

Adjusting Hand and Day Indicator Alignment

below to find out how

Page 19

Operation Guide 5513

Crown Operations

Nothing happens when I rotate the

crown.

If you do not perform any operation for about two minutes after pulling out the crown (approximately 30 minutes and day indicator alignment), crown operations will automatically become disabled. Push the crown back in to its normal position and then pull it out again to re-enable crown operations.

Using the Crown

Crown operation does not work.

Crown operation is disabled while high-speed hand movement is in progress after a watch setting is changed, etc. Wait until the hands stop moving before performing crown operations.

in the case of hand

Charging

The watch does not work even

though it is exposed to light.

The watch stops operating whenever the battery goes dead. Keep the watch exposed to light until it recharges sufficiently.

Solar Charging