Casio PV-750 User's Guide

Chapter
7
Quick-Memo is like having a digital memo pad on which you can sketch simple line drawings or jot down reminders.
Quick-Memo
Entering the Quick-Memo Mode
Tap the Quick-Memo icon below the PV Unit screen to enter the Quick-Memo Mode.
1 Draw toolbar
1
This is the Quick-Memo input screen, which appears first whenever you enter the Quick-Memo Mode.
Tap Mode. Normally, you return to the screen from which you originally entered the Quick-Memo Mode. If you enter from the Mail Mode, however, exiting the Quick-Memo Mode returns to the initial Mail Mode screen.
in the upper right corner of the screen to exit the Quick-Memo
2
2 Input toolbar
3
3 Quick-Memo category
button
7
Quick-Memo Categories
There are three Quick-Memo categories. As with categories in other modes, Quick­Memo categories let you group your memos for easier management.
To select a Quick-Memo category
Tap the Quick-Memo category button to cycle through the Quick-Memo categories in the following sequence: etc. The display shows the Quick-Memos that are stored under the currently selected category.
,
77
Using the Quick-Memo Drawing Tools
The following describes the functions of the Quick-Memo Drawing tools when inputting Quick-Memo data. T ap a drawing tool with the stylus to select it. The currently selected drawing tool is highlighted on the toolbar. T apping some of the drawing tools also cycles through a number of optional settings.
12 34 5
1 Pencil
6
Important!
A diagonal line may appear jagged on the display, even in the Quick-Memo list (page 80).
Pencil Tool
Tap this tool to cycle through line thickness in the sequence: medium
Dragging the stylus on the screen while this tool is selected draws a line.
Note that you can control the type of line produced by the pencil tool with the line tool, described below.
thick thin medium , etc.
2 Eraser 3 Line 4 Color 5 Undo 6 Selected tool
Eraser Tool
Tap this tool to cycle through eraser thickness in the sequence: medium
Dragging the stylus on the screen while this tool is selected erases anything along the line.
Note that you can control the type of path produced by the eraser tool with the line tool, described below.
78
thick thin medium , etc.
Loading...
+ 4 hidden pages