Casio OPTIO E10 User Manual

FCC STATEMENT (For customers in USA)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired

operation.

Note:

This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer ence by one or more of the following measures:

 Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

 Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC rules. Do not make any changes or modifications to the equipment un less oth erwise sp ecified in the manu al. If such changes or modifications shou ld be made, you could be required to stop operation of the equipment.

For customers in Canada

This Class B digital apparatus meets all requirements of the Canadian Interference - Causing Equipment Regulations.

Pour les utilisateurs au Canada

Cet apareil numérique de la class e B respecte tout es les exigences du Règlement su r le matériel brou illeur du Canada.

EN-1

Thank you for purchasing the PENTAX Digital Camera. Please read this manual before using the camera in order to get the most out of all the features and functions. Keep this manual safe, as it can b e a valuable tool in helping you to understand all the camera’s capabilities.

Regarding copyrights

Images taken using the PENTAX Digital Camera that are for anythi ng othe r than pe rsonal enjoyment cannot be used without permission acco rding to the rights as specified in t he Copyright Act. Please take care, as there are even cases wher e limitations are placed on taking picture s even for personal enjoyment during demonstrations, performance s or of items on displa y. Images taken with the purpose of obtaining c opyrights also cannot be used outside the sc ope of use of the copyright as laid out in the Co pyright Act, and care should be taken here also.

To users of this camera

 There is a possibility that recorded data may be erased or that the camera may not function correctly

when used in surroundings such as installations generating strong electromagnetic radiation or magnetic fields.

 The liquid crystal panel used in the LCD display is manufactured using extremely high precision

technology. Although the level of functioning pixels is 99.99% or better, you should be aware that 0.01% or fewer of the pixels may not illuminate or may illuminate when they should not. However, this has no effect on the recorded image.

Regarding trademarks

 PENTAX, Optio and smc PENTAX are trademarks of PENTAX Corporatio n.  The SD logo ( ) is a trademark.  QuickTime and QuickTime logo are trademarks used under licens e. The QuickTime logo is r egistered in

U.S. and other countries.

 All other brands or product names are trademarks or registered trademarks of their respective owners.

EN-2

Regarding PictBridge

 PictBridge allows the user to conn ect t he pr int er and di gi tal camera dire ct ly, using the unified standard for

the direct printout of images. You can print images directly from the camera through a few simple operations.

 There is a possibility that the illustrations and the display screen of the LCD monitor in this manual are

different form the actual product.

This product supports PRINT Image Matching III. PRINT Image Matching enabled digital still cameras, printers and software help photographers to produce images more faithful to their intentions. Some functions are not available on printer s that are not PRINT Image Matching III compliant.

EN-3

FOR SAFE USE OF YOUR CAMERA

Sufficient attention has been paid to th e safety of this product but please pay particular attention to the warnings indicated by the following symbols during use.

Warning These symbols indicate that it is possib le that the us er may experi ence seriou s difficulties

Caution These symbo ls indicate t hat it is pos sible that the user may experience mi nor or middli ng

About the Camera

Warning

 Do not attempt to take the camera apart or remodel the camera. High voltages are present within the

camera, and there is therefore a danger of electric shocks if the camera is taken apart.

 If the inside of the camera should become exposed as a result of, for example, the camera being dropped,

please do not under any circumstances touch such exposed portions, as there is a danger of receiving an electric shock.

 Wrapping the strap of the camera around your neck is also dangerous. Please take care that small

children do not hang the strap around their necks.

 To avoid the risk of it being swallowed by mistake, kee p the SD Memory Card out of the reac h of small

children. Seek medical attention immediately if an SD Memory Card is accidentally swallowed.

 Use an AC adapter that is of the power and voltage speci fied fo r excl usiv e use with th is pro duct. Th e use

of an AC adapter other than that spe cified exclus ively for use with this product may cause fire or elect ric shocks.

 If the camera emits smoke or a strange smell, or in the event of any other irregularity, stop using the

camera immediately, remove the battery or disconnect the AC adapter and contact your nearest PENTAX service center. Continued use of the camera may result in fire or electric shock.

EN-4

if the warnings are not heeded.

difficulties or physical difficulties if the warnings are not heeded.

Caution

 Never try to disassemble or short the battery. Also, do not dispose of the battery in fire, as it may explode.  Do not charge any batteries other tha n rech argea ble Ni- MH batter ies. Th e batt ery coul d exp lode or ca tch

fire. The batteries that can be used in this camera, only the Ni-MH battery can be recharged.

 Do not place your finger on the flash when it is discharging as there is a r isk of burns.  Do not discharge the flash while it is touching your clothing as there is a risk of discoloring.  If any of the battery leakage should come in contact with your eyes, do not rub them. Flush your eyes with

clean water and get medical attention immediately.

 If any of the battery leakage should come in contact with skin or clothes, wash the affected areas

thoroughly with water.

 Remove the battery from the came ra immedia tely if it becom es hot or begins to smoke. Be caref ul not t o

burn yourself during removal.

 Some portions of the camera heat up during use, so please take care, as there is a risk of low temperature

burns if such portions are held for long periods of time.

 Should the LCD be damaged, be careful of glass fragments. Also, be careful not to allow the liquid crystal

to get on your skin or in your eyes or in your mouth.

EN-5

Handling precautions for batteries

 This camera uses two AA alkaline, AA l ithium, AA Ni-MH or AA ni ckel manganese batt eries. Do not use

batteries other than those specified here. Using some other type of battery may cause the camera to function poorly, or the batteries may rupture or cause a fire.

 AA alkaline, AA lithium and AA nickel manganese cannot be recharged. Do not try to take the batteries

apart. The batteries may rupture or l eak if you try to charge them or take them apart.

 Do not replace the batteries with batteries that are different brands, types or capacities. Also, do not

combine old batteries with new ones. Doing so may cause the batteries to rupture or cause a fire.

 Do not insert the batteries with the positive (+) and negative ( -) poles in the w rong orientation. Doing so

may cause the batteries to ruptur e or cause a fire.

About the AC Adapter

Caution

 Do not place heavy objects on the AC plug cord, allow heavy objects to drop onto it or allow the AC plug

cord to become damaged due to exc essive bending. If the AC plug c ord becomes damaged, consult a PENTAX Service Center.

 Do not short or touch the output terminals of the product while it is still plugged in.  Do not plug in the AC plug cord with we t hands. This can cause an electri cal shock.  Do not subject the product to s trong impacts or allow it to drop onto a hard surface. This can cause a

malfunction.

EN-6

Care to be Taken During Handling

 Take the international warranty card with you when you travel abroad. Also take the Worldwide Service

Network that is included in the package. This will be useful if you exper ience problems abroad.

 When the camera has not been used for a long time, confirm that it is still working properly, particularly

prior to taking important pictures (such as at a wedding or during traveling). Contents of the recordi ng cannot be guaranteed if recording, playback or transferring your data to a computer, etc. is not possible due to a malfunction of your camera or re cording media (SD Memory Card), etc.

 The lens on this camera is not exchangeable. The lens is not removable.  Do not clean the product with organic solvents such as thinner, alcohol or benzene.  Places of high temperature and humidity should be avoided. Particular care should be taken regarding

vehicles, which can become very hot inside.

 Storing the camera where pesticides and che micals are handled should be avoided . Remove from case

and store in a well-ventilated place to pr ev ent the camera from becoming moldy during storage.

 Do not use the camera where it may come in con tact with rain, water or any other liquid, becaus e the

camera is not weather, water, or liquid resistant.

 Ensure that the camera is not s ubjected to substant ial vibrations, sho cks or pressure. P lace the camera

on a cushion for protection when the camera is subjected to the vibrations of a motorbike, car, or ship, etc.

 The temperature range in which the camera can be used is 0°C to 40°C (32°F to 104°F).  The liquid crystal display will beco me black at high temperatures but wil l return to normal when normal

temperatures are returned to .

 The response speed of the liquid cr ystal display becomes slow at low temperatures . This is due to the

properties of the liquid crystal and is not a fault.

 Periodic checks are recommended every 1 to 2 years in order to maintain high performance.  If the camera is subjected to rapid temperature changes, condensation may form on the inside and

outside of the camera. Therefore put the camer a in a bag or plastic bag, and take t he camera out when the difference in temperature has subsided.

 Avoid contact with garbage, dirt, sand, dust, water, toxic gases, salt, etc. as this may cause damage to the

camera. If rain or drops of water get ont o the camera, please wipe dry.

EN-7

 Refer to “Precautions When Using an SD Memory Card” (EN-21, 22) regarding the SD Memo ry Card.  Please do not press forcefully on the LCD monitor. This could cause breakage or malfunction.  Be careful not to sit down with the ca mera in your back pocket as this ma y damage the exterior of the

camera or the LCD monitor.

 When using a tripod with the camera, be careful not to overt ighten the screw in the t ripod socket on the

camera.

EN-8

INTRODUCTION.................................................11

CONTENTS

Package Contents............... .. .............................. 12

GETTING TO KNOW YOUR CAMERA..............13

Front View........................................................... 13

Mode Dial....... .. ... ............................... ... ... ........... 13

Rear View............................................................ 14

LCD Monitor Information ............................... .. .... 15

PREPARING THE CAMERA..............................18

Installing the Batteries......................................... 18

Using the AC Adapter (Optional Accessory)....... 19

Inserting and Removing an SD Memory Card

(Optional Accessory)........................................... 20

Attaching the Camera Strap................................ 23

GETTING STARTED ..........................................24

Turning the Power On/Off ................................... 24

Choosing the Screen Language..........................25

Setting the Date and Time .................................. 26

Formatting an SD Memory Card or

Internal Memory .................................................. 27

Using the LCD Monitor........................................ 28

PHOTOGRAPHY MODE.....................................29

Shooting Images ................................................. 29

Setting Image Resolution and Quality................. 30

Using the Zoom Function .................................... 31

Using the Flash ................................................... 32

Setting Focus ...................................................... 33

DRIVE MODE......................................................34

High Speed Continuous...................................... 34

Auto Bracket........................................................ 35

Self-Timer............................................................ 36

Adjusting the Exposure (EV Compensation)....... 38

Setting White Balance......................................... 39

USING THE MODE DIAL....................................40

Simple Mode ....................................................... 40

Program Mode .................................................... 40

Portrait Mode.................................... ................... 41

Landscape Mode................................................. 41

Sport Mode....................................... ................... 42

Night Scene Mode............................................... 42

EN-9

PLAYBACK MODE - THE BASICS ....................43

Viewing Images ...... ... ............................... ...........43

Magnifying Images...............................................44

Thumbnail Display ....................... ... .....................45

Slideshow Display...... .. ... .....................................46

Resizing an Image ...............................................47

MOVIE MODE......................................................48

Recording Movie Clips.............. ... ........................48

Playing Back Movie Clips ....................................49

PLAYBACK MODE - ADVANCED FEATURES .50

Playing Back Still Images/Movie Clips on TV ......50

Deleting Images/Movie Clips...............................51

Protecting Images/Movie Clips ............................ 52

Setting the DPOF.................................................53

Connecting to a PictBridge-Compatible Printer...55

TRANSFERRING FILES FROM YOUR DIGITAL

CAMERA TO COMPUTER..................................59

Step 1: Install the USB driver...............................61

Step 2: Connect the digital camera to

your computer......................................................62

EN-10

EDITING SOFTWARE INSTALLATION.............64

Installing ACDSee for PENTAX ...........................64

USING THE DIGITAL CAMERA AS A PC

CAMERA.............................................................65

Step 1: Install the PC camera driver....................65

Step 2: Connect the digital camera to

your computer......................................................66

Step 3: Run your application software

(i.e. Windows NetMeeting)...................................67

MENU OPTIONS.................................................68

Camera Menu...................................... ... .............68

Movie Menu ......................................................... 73

Playback Menu .................................................... 74

Setup Menu .........................................................77

CONNECTING THE DIGITAL CAMERA TO

OTHER DEVICES...............................................81

SPECIFICATIONS ..............................................82

APPENDIX..........................................................84

WARRANTY POLICY.........................................88

INTRODUCTION

Thank you for purchasing the new digital still camera! Equipped with a 6.0 Megapixels CCD sensor, your camera delivers high quality, 2816 x 2112 resolution images. Other features provided by the camera include the following:

 6.0 Megapixels

A high-resolution CCD sensor provides 6.0 megapixels for high quality of images.

 Auto flash

An auto flash sensor automatically det ects the shooting (lighting) conditions and determines whether the flash should be used.

 2.4” TFT color image LCD monitor  Optical zoom: 1x~3x  Digital zoom: 1x~4x  Approx. 10MB internal (built-in) memory

Images can be captured without usin g an SD memory card.

 Support for SD memory card for memory

expansion

You may wish to expand the memory capacity (up to 1GB capacity) by using an additional SD memory card.

 USB connection

Still images or movie clips that you have recorded can be downloaded to your compute using the USB cable (A USB driver is required for Win 98 and Win98SE).

 DPOF functionality

DPOF can be used to print your images on a DPOF compatible printer by simply inserting the SD memory card.

 PictBridge support

You can connect the camera directly to printe that supports PictBridge and perform image selection and printing using the camera monitor screen and controls.

 Provided editing software: ACDSee fo

PENTAX

You can enhance and retouch your images on your computer by using the provided editing software.

EN-11

Package Contents

Carefully unpack your kit bo x and ensure that you have the foll owing items. In the event that an y item is missing or if you find any mismatch or damage, promptly contact your dealer.

Common Product Components:

 Digital Camera  Quick St a rt Guide  Operating manuals (CD-ROM)  Software CD-ROM (S-SW47)  Camera Strap  AV Cable  USB Cable  Two AA alkaline batteries (for checking the camera’s functionality)

*******************************************************************************

Common (Optional) Accessories (not included with the camera):

 AC adapter (supplied by PENTAX)  SD memory card (commercially available)  Batteries and battery charger (commercially available)

 Accessories and components may vary by retailer.

EN-12

GETTING TO KNOW YOUR CAMERA

Front View

1. Shutter release button

2. Flash

3. Power switch

4. Mode dial

5. Self-timer LED

6. Microphone

7. PC / AV terminal

8. DC input terminal

9. Lens

Mode Dial

1 2

8 9

1. Program

2. Portrait

3. Landscape

4. Sport

5. Night Scene

6. Setup

7. Movie

8. Simple

Mode

EN-13

Rear View

EN-14

1. LED indicator

2. / button / button

3. button

4. MENU button

5. button

6. Four-way con troller / S button / X button / W button / T button

7. Strap holder

8. button DISPLAY butto n

9. Battery / card cover

10.Tripod socket

11. LCD monitor

LCD Monitor Information

AWB

 Camera Mode

1. Mode indicatio n [] Program [] Portrait [ ] Landscape [] Sport [ ] Night s cene [] Setup [] Movie [] Simple

2. Flash mode [] Auto [ ] Auto + Red-eye [ ] Flash on [ ] Flash off

3. Drive mode [ ] Standard [ ] High Speed Continuous [ ] Auto Bracket

[ ] 2 sec. Self-timer

[ ] 10 sec. self-timer [ ] 10+2 sec. Self-timer

4. Focus mode [ Std.] Standard [] Macro [ ] Infinity

5. Possible number of shots

6. Memory status

7. Battery and AC adapter

8. Recorded pixels

9. Image quality

10.White balance

: Built-in memory

(without card)

: SD memory card

[ ] Full battery power [ ] Medium battery power [ ] Low battery power [ ] No battery power [ ] AC adapter

[ ] 2816 x 2112

[ ] 2272 x 1704

[ ] 1600 x 1200

640

[ ] 640 x 480

[] Best [ ] Better [ ] Good

[AWB] Auto [ ] Daylight [] Cloudy [ ] Tungsten Light [ ] Fluorescent Light

213 4

11.ISO sensitivity

12.EV compensation

13.Zoom bar

14.Focus area

2.2x

[ ] Auto [] 64 [ ] 100 [ ] 200

5 6

+0.3

8 9

10 11

EN-15

 Movie Mode

1. Movie mode

2. Flash mode

3. Recordable movie time available

4. Memory status

5. Battery power and AC adapter indicator

6. Focus area

7. Zoom bar

1 2

3 4

00:51

 Image Playback

1. Playback mode

2. Number of image

3. Memory status

4. Battery power and AC adapter indicator

5. Index number of to tal number

6. DPOF indicator

7. Protect indicator

8. Date

9. Time

10.EV compensation

11.ISO sensitivity

12.White balance

13.Image quality

14.Recorded pixels

EN-16

 Movie Playback

1. Playback mode

2. Movie mode

3. Number of movie

4. Memory status

5. Battery power and AC adapter indicator

6. Index number of total number

7. Elapsed time

8. Date

9. Time

10.Play/Pause indicator

EN-17

PREPARING THE CAMERA

Installing the Batteries

You can use 2 AA size batteries (alkaline or Ni-MH rechargeable) to power the camera. Make sure that the power of the digital camera is off before inserting or removing the batteries.

1. Make sure the camera is turned off.

2. Open the battery cover.

3. Insert the batteries in the correct orientation as shown in the illustration.

4. Close the battery cover.  To remove the batteries, turn the camera off before removing

batteries and hold the camera with the battery cover facing upward, then open the battery c over.

 Be careful not to drop the batteries when opening or closing the battery cover.  Due to the characteristics of AA alkaline battery, camera performance may deteriorate. AA alkaline battery is not

recommended except in emergencies and checking the camera's functionality.

EN-18

Using the AC Adapter (Optional Accessory)

Use of the AC adapter is recommended if y ou intend to use the LCD monitor for a long ti me or connect the camera to a PC.

1. Make sure your camera is off.

2. Connect one end of the AC adapter to the camera DC input terminal labeled "DC IN 3V".

3. Connect the other end to an power outlet.

DC terminal

AC adapter

To power outlet

AC power cable

 Make sure to use only the AC adapter specified for the camera. Damage caused by the use of an incorrect adapter is not

covered under the warranty.

 T o prevent unexpected auto power off resulting from no battery power lef t during the process of transferring your images to

the computer, use the AC adapter as a power supply.

 The AC adapter can only be used to power the camera. Batteries cannot be charged inside the camera.

EN-19

Inserting and Removing an SD Memory Card (Optional Accessory)

The digital camera comes with approx. 10MB of internal memory, allowing you to store captured still images or movie clips in the digital camera. Moreover, you can also expand the memory capacity by using an optional SD (Secure Digital) memory card so that you can store more files.

1. Make sure your camera is turned off before inserting or removing an SD memory card.

2. Open the SD memory card cover.

3. Insert an SD memory card in the correct orientation as shown in the illustration.

4. Close the SD memory card cover.  To remove the SD memory card, make sure the camera is

turned off. Press lightly on t he edge of the SD memory card and it will eject.

 Be sure to format an SD memory card with this digital camera before using it. Refer to section in the manual title d

“Formatting an SD Memory Card or Internal Memory”

EN-20

(EN-27) for further details.

Data Backup

Very occasionally, malfunction of the camera may cause data stored in the built-in memory to become unreadable. As a backup measur e, we recommend that you d ownload important data to a PC or store the data in a media other than the built-in memory.

Precautions When Using an SD Memory Card

 Make sure that the camera is turned off before opening or closing the

card cover.

 The SD memory card is equipped with a write -protect switch. Setting t he

switch to [LOCK] protects the ex isting data by prohibiting recording of new data, deletion of existing data or format ting of the card. [Card locked] appears on the LCD monitor in recording mode when the card is write-protected.

 Care should be taken if you r emove the SD memory card immediately

after using the camera, as the card may be hot.

 Do not remove the SD memory card or turn th e camera off while data is being recorded on the card,

images or voice memos are being played back, or the camera is connected to a PC with the USB cable as this may cause the data to be lost or the card to be damaged.

 Do not bend the SD memory card o r su bject it t o viol ent i mpact. Keep it away fr om wat er and store away

from high temperature.

 Do not remove the SD memory card during formatting as this may damage the card and render it

unusable.

Write-protect switch

EN-21

 The data on the SD memory card may be deleted in the following circumstances. PENTAX does not

accept any liability for da ta that is deleted (1) when the SD memory card is mishandled by the user. (2) when the SD memory card is exposed to stati c electricity or electrical interference. (3) when the card has not been used for a long time. (4) when the card is ejecte d, the A C adapt er is di sconne cted or the ba tteries are r emoved w hile the data

on the card is being recorded or accessed.

 The SD memory card has a limited service li fe. If it is no t used for a long ti me, the data on the card may

become unreadable. Be sure to make a backup of important data on a PC.

 Avoid using or storing the card where it may be exposed to static electricity or electrical interference.  Avoid using or storing the card in direct sunlight or where it may be exposed to rapid changes in

temperature or to condensation .

 When using an SD memory card with a slow recording speed, recording may stop whil e you are taking

movies even when there is adequat e space in the memory, or shooting and playback may take a long time.

 If you are going to discard, give away or sell your SD memory card you should ensure that the data on the

card is completely deleted or the card itself is destroyed if it contains any personal or sensitive information. Please note that formatting the SD card will not necessarily delete the data so that it cannot be recovered using off the shelf data recovery software. There are off the shelf secure data deletion software programs available that will complete ly delete the data. In any case the data on your SD memory card sh ould be managed at your own risk.

 For information on compatible memory cards, contact your nearest PENTAX customer service center.

EN-22

Attaching the Camera Strap

 Attach the strap as shown in the illustrations.

EN-23

GETTING STARTED

Turning the Power On/Off

 Press the power switch until the digital camera turns on.  To turn the power off, press the power switch again.

EN-24

Power switch

Choosing the Screen Language

Follow the steps below to choose the desired language.

1. Rotate the mode di al to and turn your camera on by pressi ng the power switch.

2. [Set-up1] is displayed.

3. Use the four-way controller (T) to select [Language], then press the button.

4. Use the four-way controller (ST) to select the language you want.

5. Press the button to confirm.

EN-25

Setting the Date and Time

Follow the steps below to set the date display style, current date and time.

1. Rotate the mode di al to and turn your camera on by pre ssing the power switch.

2. [Set-up1] is displayed.

3. Use the four-way controller (T) to select [Date Adjust] and the four-way controller (WX) to switch the date types,then press the

button.

4. Press the four-way controller (WX) to select Day, Month, Year and Time fields.

 To increase a value, press the four-way controller (S).  To decrease a value, press the four-way controller (T).  The time is displayed in 24-hours format.

5. Press the button after all fields are se t.

 The date illustration shown is for the purpose of explanation and may differ from the actual setting of your camera.

EN-26

Formatting an SD Memory Card or Internal Memory

The term “Formatting” means preparing an “SD memory card” to record images; this process is also called “initialization”. This util ity formats an SD memory card or the internal memory and erases all stored imag es and data.

1. Rotate the mode di al to and turn your camera on by pressi ng the power switch.  [Set-up1] is displayed.

2. Use the four- way controller ( T) to select [Format], then press the

button.

3. Use the four -way controller (ST) to select [OK], then p ress the

button to confirm.

 When you format an SD memory card, be aware that all data on the SD memory card will be erased. Protected images are

also erased.

 To format the internal memory, do not insert an SD memory card into the camera. Otherwise, you will format the SD

memory card.

 An SD memory card having any problem cannot be properly formatted.

EN-27

Using the LCD Monitor

Yours camera is equipped with a 2.4” full color TFT LCD monitor to help you compose images, replay recorded images/movie clips or a djust menu settings. The mo de icons, text and number s displayed on the monitor may vary according to the current settings.

1. Rotate the mode dial to , , , , , or .

2. Press the pow er switch to turn on the power.

3. Compose your scene on the LCD monitor.

4. Press the shutter release button.

 The LCD monitor darkens in strong sunlight or bright light. This is not a malfunction.  To prevent your images from being blurred while pressing the shutter release button, always hold it carefully. This is

especially important when you are sh ooting un der low light ing condi tions, sinc e your camer a may decele rate the sh utter speed to ensure your images are properly exposed.

EN-28

+ 63 hidden pages

Casio OPTIO E10 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual