Casio MO1012-EA User Manual
MO1012-EA
Operation Guide 5202
• Each section of this manual provides you with the information you need to perform
operations in each mode. Further details and technical information can be found in
the “Reference” section.
E-2
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the digital time and date ............................................................................. E-9
To change the Daylight Saving Time (summer time) setting ............................ E-12
To specify a distance value.................................................................................. E-16
To specify lap time or split time readings .......................................................... E-18
To perform elapsed time measurement .............................................................. E-19
To set up the stopwatch to take lap time readings ............................................E-20
To perform a lap time measurement ................................................................... E-21
To set up the stopwatch to take split time readings.......................................... E-22
To perform a split time measurement .................................................................E-23
To measure times with the stopwatch ................................................................ E-24
E-4
About This Manual
• Depending on the model of your watch, display text
appears either as dark figures on a light background or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
• Button operations are indicated using the letters shown
in the illustration.
• Note that the product illustrations in this manual are
intended for reference only, and so the actual product
may appear somewhat different than depicted by an
illustration.
E-1
Contents
General Guide ......................................................................................................... E-6
Timekeeping ............................................................................................................ E-8
Stopwatch ..............................................................................................................E-14
Countdown Timer .................................................................................................. E-25
World Time ............................................................................................................. E-29
Alarms ....................................................................................................................E-33
Illumination ............................................................................................................E-38
Hand Home Position Correction ..........................................................................E-42
Reference .............................................................................................................. E-44
Specifications ....................................................................................................... E-48
E-3
To use the countdown timer ................................................................................ E-26
To configure countdown start time and auto-repeat settings .......................... E-27
To view the current time in another time zone ................................................... E-30
To toggle a city code time between Standard Time and Daylight Saving Time .....
To swap your Home City and World Time City ................................................... E-32
To set an alarm time ............................................................................................. E-34
To turn an alarm on and off.................................................................................. E-36
To turn the Hourly Time Signal on and off ..........................................................E-37
To illuminate the display manually ...................................................................... E-38
To specify the illumination duration ................................................................... E-39
To turn the auto light switch on and off.............................................................. E-41
To adjust home positions..................................................................................... E-42
E-31
E-5
General Guide
• Press C to change from mode to mode.
• In any mode (except a setting mode), press B to illuminate the display.
Timekeeping Mode
Press C.
▲
E-6
Timekeeping
You can adjust the Home Time city date and time in the Timekeeping Mode.
• The analog time of this watch is synchronized with the digital time. The analog time
setting is adjusted automatically whenever you change the digital time.
• If the analog time does not match the digital time for any reason, use the procedure
described under “To adjust home positions” (page E-42) to match the analog setting
to the digital setting.
• Pressing D in the Timekeeping Mode toggles digital display between the Home City
Date and Home City Time.
E-8
Home City Date Home City Time
Month Day
Day of week
▲
Seconds
D
PM indicator
Day of week
▲
Seconds
Hour : Minutes
Stopwatch Mode (page E-14)
▲
Alarm Mode (page E-33)
To set the digital time and date
City code
PM indicator
Seconds
Hour : Minutes
1. In the Timekeeping Mode, hold down A for about three
seconds until the currently selected city code flashes in
the upper digital display. This is the setting mode.
2. Use D (east) and B (west) to select the city code you
want.
• Make sure you select your Home City code before
• For full information on city codes, see the “City Code
Countdown Timer Mode (page E-25)
▲
World Time Mode (page E-29)
▲
changing any other setting.
Table” at the back of this manual.
▲
E-7
E-9
Operation Guide 5202
3. Press C to change the flashing screen content in the sequence shown below to
select the other setting.
City Code
Illumination
Duration
4. When the setting you want to change is flashing, use D or B to change it as
described below.
Screen:
E-10
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
DST
To do this: Do this:
Change the city code
Toggle the DST setting between
Daylight Saving Time (on) and
Standard Time (OFF).
To change the Daylight Saving Time (summer time) setting
DST indicator
E-12
12/24-Hour
Format
Day
1. In the Timekeeping Mode, hold down A for about three
2. Press C. This will display the DST setting screen.
3. Use D to toggle the DST setting on (on) and off (OFF).
4. When the setting you want is selected, press A to exit
• The DST indicator appears to indicate that Daylight
Month
seconds until the currently selected city code flashes in
the upper digital display. This is the setting mode.
• The default DST setting is off (OFF).
the setting mode.
Saving Time is turned on.
Seconds
Year
Use D (east) and B
(west).
Press D.
Hour
Minutes
Stopwatch
Upper display
segments
Speed hand
E-14
You can use the stopwatch to measure elapsed time, lap
times and split times. If you specify a distance value, the
stopwatch also will calculate and display speeds.
• The digital display range of the stopwatch is 99 hours,
59 minutes, 59.999 seconds. The stopwatch continues
to run until you stop it. If it reaches the above limit, it will
restart the time measurement from zero.
• The stopwatch operation continues even if you exit the
Stopwatch Mode. If you exit the Stopwatch Mode while a
stopwatch operation is in progress, the segments along
the top of the upper digital display (upper display
segments) will indicate the seconds of the current time.
Each segment represents one second. This is to let you
know that a stopwatch operation is in progress.
• All of the operations in this section are performed in the
Stopwatch Mode, which you enter by pressing C (page
E-7).
Screen: To do this:
5. Press A to exit the setting mode.
• The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
12-hour and 24-hour timekeeping
• With the 12-hour format, the PM indicator (P) appears for times in the range of noon to
11:59 p.m. and no indicator appears for times in the range of midnight to 11:59 a.m.
• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
the PM indicator (P).
• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all other modes.
Important!
• Check to make sure that the speed hand is not moving before you perform any
Stopwatch Mode button operation.
Specifying a Distance Value
You can use the procedure below to specify a distance value, if you want. If you
specify a distance value, the watch will calculate and indicate speed for certain
stopwatch operations.
• The distance value represents kilometers, miles, or any other distance unit you want.
Specifying a distance value of 10.0, for example, can mean 10.0 kilometers or 10.0
miles.
• No speed calculation is performed when 0.0 is specified as the current distance
value.
• For lap time readings, you can specify either the lap distance (when all the laps are
the same distance) or the total race distance.
• For split time readings, you can specify the total race distance only. Though the
watch will indicate a speed each time you take a split reading, they will be based on
the total race distance, and so they will not indicate actual intermediate split speeds.
Toggle between 12-hour (12H) and
24-hour (24H) timekeeping
Reset the seconds to 00
Change the hour and minutes
Change the year, month, or day
Toggle the display illumination
duration between 1.5 seconds (LT1 )
and three seconds (LT3 )
Do this:
Press D.
Press D.
Use D (+) and B (–).
Press D.
E-11
E-13
E-15
To specify a distance value
E-16
Time Measurement
You need to specify either lap time (page E-20) or split time (page E-22) measurement
before you start a stopwatch operation.
• If you want to measure total elapsed time, select split time measurement.
To specify lap time or split time readings
1. In the Stopwatch Mode, make sure the stopwatch is stopped and reset to all zeros.
• Make sure that
display.
• If you need to reset the stopwatch to all zeros, press A.
2. You can toggle between
E-18
1. In the Stopwatch Mode, make sure the stopwatch is
stopped and reset to all zeros.
• If you need to reset the stopwatch to all zeros, press A.
2.
Hold down A for about three seconds until the current
distance value setting flashes in the lower digital display.
• This is the distance value setting mode.
3. Press C to move the flashing between the values on
the left side and right side of the distance value decimal
point.
4. While a distance value is flashing, use D (+) and B (–)
to change it.
• You can specify a distance value in the range of 0.1 to
99.9.
5. After specifying the distance value you want, press A
to exit the setting mode.
LAP (lap times) or SPL (split times) is shown in the lower digital
LAP
(lap times) and
SPL
(split times) by pressing A.
▲
▲
A
How speed is indicated
Segments (100 unit)
1000 indicator
OVER
Speed hand (Up to 100)
Elapsed Time Measurement
Use the following procedure to measure elapsed time, without taking lap time or split
time readings.
To perform elapsed time measurement
Select split time (
D Start ➝ D Stop ➝ A Reset
• If you have a distance value (page E-15) specified for the current elapsed time
measurement, the upper display segments and speed hand will indicate the speed
when you press D to stop the elapsed time operation.
• After pressing D to stop an elapsed time operation, you could press D again to
restart from the point where you left off.
• While an elapsed time measurement operation is being
performed in the Stopwatch Mode, the watch will
indicate a speed value, which is calculated based on the
distance you specified and the elapsed time.
The speed value is indicated as described below.
Speed hand: Up to 100
Upper display segments: 100 unit
A 1000 indicator points to 1000 (located to the right of
the upper display segments) when the speed value
exceeds 1000.
• The speed hand indicates speed values less than 100.
Only even-numbered values are indicated.
•
Speed can be indicated from 0 to 1998. OVE R is indicated
by the speed hand when the speed exceeds 1998.
Example:
When the speed value is 1,740.
Speed hand: Indicates 40.
Upper display segments: Indicate 700.
1000 indicator: Displayed
SPL
) measurement and then perform the following button operations.
E-17
E-19
Loading...