Casio MA0505-EA, DQ-745, PQ-65 User Manual

MA0505-EA

Operation Guide DQ-745/PQ-65

ILLUSTRATION

• A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the
clock.

• Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.

PM indicator

Date
(month - day)

Alarm Off Snooze Alarm On

Current time

Day of the week

(Hour, minutes, seconds)

Current temperature

Snooze on
indicator

Alarm time

Alarm on indicator

1

Operation Guide DQ-745/PQ-65

GENERAL GUIDE

11

1 SNOOZE/LIGHT button

11

• Press this button to illuminate the display for about five seconds.

• Pressing this button while the alarm is sounding stops the alarm.

22

2 Alarm Mode selector

22

SNZ: Snooze alarm on
ON: Alarm on
OFF: Alarm off

33

3 + / – buttons

33

Use these buttons to change the alarm time or the setting that is flashing on the display.

44

4

°C/°F button

44

Press this button to toggle the temperature units between Celsius and Fahrenheit.

55

5 SET button

55

Use this button when setting the current time.

66

6 RESET button

66

Press this button to reset the clock after replacing its batteries.

77

7 SOUND Selector (DQ-745 only)

77

Use this selector to select the alarm volume.

• Buttons marked “INVALID” have no function.

USING THE CLOCK

1. Press the SET button (5) to cycle through the setting screens as shown below.

Normal Timekeeping Screen

Time Setting ScreenMonth and Day Setting ScreenYear Setting Screen

2. While the screen you want is displayed, use the + and – buttons (3) to change the flashing digits.

DQ-745 PQ-65

Press – to
decrease
the flashing
digits.

• Holding down + or – changes the flashing digits at high speed.

• You can set the year in the range of 2000 to 2039. The day of the week is set automatically in accordance with

the date setting.

• Pressing + or – while the Time Setting Screen is on the display causes the seconds count to be reset to 00.

• Each press of + or – while the 12-hour/24-hour Timekeeping Screen is on the display toggles between 12-hour

and 24-hour timekeeping.

3. After making the settings you want, use the SET button (5) to display the Normal Timekeeping Screen.

• The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for
about three minutes without performing any operation.

ALARM SET

Press + to
increase
the flashing
digits.

Press – to
decrease
the flashing
digits.

12-hour/24-hour

Timekeeping Screen

Press + to
increase
the flashing
digits.

USING THE ALARM

The alarm sounds when the alarm time you set is reached. You can also use the Alarm Mode selector (2) to
select the snooze alarm feature.

Setting the Alarm Time

Use the + and – buttons (3) to set the alarm time.
Pressing the + and – buttons (3) causes the alarm time to appear in place of the date on the display.

PQ-65DQ-745

Press – to
change the
alarm time
setting.

• Holding down + or – changes the digits at high speed.

Turning the Alarm On and Off

Use the Alarm Mode selector (2) on the side of the clock to turn the alarm on and off, and to select the snooze
feature.

Alarm Mode selector

SNZ

ON

OFF

• The alarm time appears in place of the date on the display whenever the Alarm Mode selector (2) is set to ON
or SNZ.

• The light also turns on for the first four seconds that the alarm sounds.

• The alarm sound changes over four levels as it sounds.

Stopping the Alarm

• When alarm is sounding, press the SNOOZE/LIGHT button (1) to stop it. When the snooze feature is turned on,
the alarm will sound again in about five minutes.

• To turn off the snooze feature, slide the Alarm Mode selector (2) to OFF.

ALARM SET

The alarm sounds at the preset time for one minute, and up to seven more times
every five minutes thereafter. Even if you stop the alarm by pressing the SNOOZE/
LIGHT button (1), the alarm sounds again five minutes later.

• The indicator
activated.

The alarm sounds at the preset time for one minute.

The alarm does not sound.

Press + to
change the
alarm time
setting.

flashes on the display to indicate that the snooze feature is

Press – to
change the
alarm time
setting.

Description

Press + to
change the
alarm time
setting.

USING THE LIGHT

Pressing the SNOOZE/LIGHT button (1) turns on the light and illuminates the display for easy reading in the dark.

Important!

• Overuse of the light can shorten battery life.

2