Casio HS-60W User Manual
MA0410-EA
e
Operation Guide HS-60W
ILLUSTRATION
Each press of the B button toggles the display between the TIME and STOPWATCH screens.
TIME SCREEN STOPWATCH SCREEN
Hold down for a few seconds to
toggle between 12/24-hour formats.
Lap counter
Seconds
Year
Month
Day
Press .
Hour
Minutes
Seconds
1/1000th of a second
Split tim
Lap time
Total
elapsed
time
Day of
the week
PM
Hour
• A sticker is affixed to the glass of the stopwatch when you purchase it. Be sure to remove the sticker before using
the stopwatch.
• Depending on its model number, the configuration of your stopwatch may differ somewhat from that shown in the
illustration.
Minutes
GENERAL GUIDE
STOPWATCH MODE
A button ..... Starts and stops timing.
B button ..... Toggles between the current time and stopwatch screens.
C button .... Registers a lap/split time.
R button ..... Recalls lap/split time records and the total elapsed time.
L button ..... Press to illuminate the display for about three seconds.
START
START
1ST SPLIT
1ST LAP
2ND SPLIT
2ND LAP
3RD SPLIT
3RD LAP
SPLIT TIME AND LAP TIME
Split time (SPLIT) is the time
elapsed from the start to a
specific point.
Lap time (LAP) is the time
elapsed from one point to another
or for one lap around a track.
USING THE STOPWATCH 1
The stopwatch beeps whenever the A or C button is pressed.
Time Display Ranges
Total elapsed time and the split time can be displayed up to 9 hours, 59 minutes, 59.999 seconds. Lap time is
displayed up to 59 minutes, 59.999 seconds. Timing restarts from zero after any of the limits described above is
reached.
The range of the lap counter is from 01 to 99. The lap count restarts from 00 after reaching 99.
NORMAL ELAPSED TIME
MEASUREMENT
BUTTON
OPERATION
DISPLAY
NET ELAPSED TIME
MEASUREMENT
BUTTON
OPERATION
DISPLAY
After stopping a net elapsed time operation by pressing A, you can resume it by pressing A again.
START STOP RESET
0
START STOP START STOP RESET
0
a
(a) (a)
(Lost time)
(a + b)
b
1
Operation Guide HS-60W
USING THE STOPWATCH 2
LAP/SPLIT TIMES
Lap and split times are automatically stored in memory. There is enough memory to hold up to 99 lap/split time
records (01 to 99), plus the total elapsed time. The displayed lap number will flash when memory is full.
Pressing C while memory is full will display the current lap/split times along with the flashing lap number, without
storing them in memory.
Records can be recalled by pressing the R button.
START
MEASUREMENT
BUTTON
OPERATION
1ST LAP 2ND LAP 3RD LAP
0
1ST SPLIT (a
a
(a)
)
2ND SPLIT (a+b
(b)
b
)
3RD SPLIT (a+b+c
(c)
c
)
DISPLAY
Recording the Finishing Times of Multiple Runners
After pressing A to start timing, press C as each runner crosses the finish line. This records each of the finishing
times in memory, which you can recall by pressing the R button.
*
Recorded times are retained in memory until you start a new net elapsed time operation (by pressing A) after
clearing the stopwatch screen to all zeros (by pressing
Example : To record the times of 10 different runners.
MEASUREMENT
BUTTON
OPERATION
START 1ST RUNNER
You can scroll through records in memory by pressing , even while the stopwatch is still
running.
FINISHES
C
).
2ND RUNNER
FINISHES
9TH RUNNER
FINISHES
STOP RESET
10TH RUNNER
FINISHES
SETTING TIME AND DATE
1)While the TIME screen is displayed, hold down C for a few seconds to
display the setting screen.
2)Press A to reset seconds count to 00.
3)Press C to move flashing between settings.
SECONDS HOUR MINUTES YEAR
MONTHDAYDAY OF THE WEEK
4)Press A to change (+) selected setting. Hold down A to change at high
speed.
5)To exit the setting screen, press B at any time or C while the day of the
week setting is flashing.
*
Year setting is possible up to 2099.
Auto Return
The setting screen automatically returns to the TIME screen if you do not perform any operation for a few minutes.
CARE OF YOUR STOPWATCH
• This stopwatch is water resistant up to five bars (atmospheres), which means you can use it in the rain or in
areas where splashing water is present. Never operate the buttons of the stopwatch while it is immersed in water.
• You should have the rubber seal that keeps out water and dust replaced every 2 to 3 years.
• Should moisture appear inside the stopwatch, have it checked immediately by your retailer or a CASIO
distributor.
DISPLAY
Press .
Runner’s time
Difference between this runner’s time
Runner’s finishing position
and the previous runner’s time
2
Loading...