Casio HS-6 User Manual
MA0212-A
USER’S GUIDE HS-3(V) HS-6
Minutes
Hours
• A sticker is affixed to the glass of this stopwatch when you purchase it. Be sure to remove the sticker before
using the stopwatch.
• Depending on the stopwatch model, the configuration of your stopwatch may differ somewhat from that shown in
the illustration.
Seconds
1/100 second
SPLIT/LAP indicator
indicates the SPLIT mode.
indicates the LAP mode.
Minutes
Hours
Seconds
1/100 second
SPLIT/LAP indicator
indicates the SPLIT mode.
indicates the LAP mode.
1
USER’S GUIDE HS-3(V) HS-6
USING THE STOPWATCH
A Press this button to start and stop elapsed time measurement.
B Press this button while an elapsed time measurement is in progress to momentarily freeze a SPLIT or LAP
time on the display (timing continues internally). Press again to display the ongoing time measurement. You can
repeat the LAP/SPLIT time operation as many times you want. Pressing this button while elapsed time
measurement is stopped resets the time to all zeros.
C Press this button to toggle between the SPLIT time mode and LAP time mode.
• The maximum elapsed time that can be measured is 9 hours, 59 minutes, 59.99 seconds.
A SPLIT is the time from the start of an event up to any specific point.
A LAP is the time for one segment (lap) of an event.
SPLIT
LAP
ENGLI
How to operate the stopwatch
• Normal time measurement
START STOP
0a (a)
Press A. Press A. Press B to reset
• Net times (Accumulated time excluding loss time)
START STOP START STOP
0a (a) (a) b (a+b)
(Lost time)
Press A. Press A. Press A. Press A.
to zero.
Press B to reset
to zero.
• SPLIT timing
START STOP
0a (a) b (a+b) c (a+b+c) (t)
SPLIT
(a)
Press A in Press B to freeze SPLIT Press B to freeze SPLIT
SPLIT mode. time
• 1st-2nd place times
START SPLIT STOP SPLIT release RESET
0a (a)
b
(a)
Press A
in SPLIT
mode.
• LAP timing (Lap timing for each segment of an event)
START STOP STOP STOP
0a (a) b (b) c (c)
Press A in
LAP mode.
Press B when the
first runner
finishes.
Displays time of
first runner.
LAP
(a)
SPLIT (a+
b)
(a)
. Press B to release. time (a+b). Press B to release.
(b)
LAP
(a)
.
Press A when the
second runner
finishes.
(b)
(a)
START START
Press B to
freeze LAP
time
Press B to
release.
SPLIT (a+b+
(b)
(b)
LAP
Press B to
freeze LAP
time
(b)
.
Press B to
release.
c)
Press B to
display the time of
the second runner.
(c)
Press A.
Press B to reset.
Press A.
Press B
to reset.
Press B
to reset.
2
Loading...