Casio HS-3V User Manual

MA0212-A
USER’S GUIDE HS-3(V) HS-6
Minutes
Hours
A sticker is affixed to the glass of this stopwatch when you purchase it. Be sure to remove the sticker before using the stopwatch.
Depending on the stopwatch model, the configuration of your stopwatch may differ somewhat from that shown in the illustration.
Seconds
1/100 second
indicates the SPLIT mode.
indicates the LAP mode.
Minutes
Hours
Seconds
1/100 second
indicates the SPLIT mode.
indicates the LAP mode.
1
USER’S GUIDE HS-3(V) HS-6
USING THE STOPWATCH
A Press this button to start and stop elapsed time measurement. B Press this button while an elapsed time measurement is in progress to momentarily freeze a SPLIT or LAP
time on the display (timing continues internally). Press again to display the ongoing time measurement. You can repeat the LAP/SPLIT time operation as many times you want. Pressing this button while elapsed time measurement is stopped resets the time to all zeros.
C Press this button to toggle between the SPLIT time mode and LAP time mode.
• The maximum elapsed time that can be measured is 9 hours, 59 minutes, 59.99 seconds.
A SPLIT is the time from the start of an event up to any specific point. A LAP is the time for one segment (lap) of an event.
SPLIT LAP
ENGLI
How to operate the stopwatch
• Normal time measurement
START STOP
0a (a)
Press A. Press A. Press B to reset
• Net times (Accumulated time excluding loss time)
START STOP START STOP
0a (a) (a) b (a+b)
(Lost time)
Press A. Press A. Press A. Press A.
to zero.
Press B to reset to zero.
• SPLIT timing
START STOP
0a (a) b (a+b) c (a+b+c) (t)
SPLIT
(a)
Press A in Press B to freeze SPLIT Press B to freeze SPLIT SPLIT mode. time
• 1st-2nd place times
START SPLIT STOP SPLIT release RESET
0a (a)
b
(a)
Press A in SPLIT mode.
• LAP timing (Lap timing for each segment of an event)
START STOP STOP STOP
0a (a) b (b) c (c)
Press A in LAP mode.
Press B when the first runner finishes. Displays time of first runner.
LAP
(a)
SPLIT (a+
b)
(a)
. Press B to release. time (a+b). Press B to release.
(b)
LAP
(a)
.
Press A when the second runner finishes.
(b)
(a)
START START
Press B to freeze LAP time Press B to release.
SPLIT (a+b+
(b)
(b)
LAP
Press B to freeze LAP time
(b)
.
Press B to release.
c)
Press B to display the time of the second runner.
(c)
Press A. Press B to reset.
Press A. Press B to reset.
Press B to reset.
2
Loading...