[CHARGE] lamp lights red during charging.
[CHARGE] lamp goes out when charging is complete.
• It takes about 90 minutes to achieve a full charge.
9
QUICK START BASICS
■ Loading the Battery into the Camera
3. Close the battery cover.
1. Open the battery cover.
While pressing lightly on the cover,
1
slide it in the direction indicated by
2
the arrow to open.
2. Load the battery into the camera.
Front (EXILIM logo)
Battery
contacts
EXILIM
logo
Front
1
2
Stopper
Back
QUICK START BASICS
10
Configuring Display Language, Date, and Time Settings
[ON/OFF] (Power)
1. Press [ON/OFF] to turn on the camera.
2. Use [S], [T], [W], and [X] to select the
language you want and then press [SET].
3. Use [S], [T], [W], and [X] to select the area
where you will use the camera and then press
[
]
[
][]
]
[BS]
The settings on this page are required the first time you turn on
the camera after purchasing it.
• If you make a mistake when configuring the language, date,
and time settings, you can change the settings (pages 193,
197).
[
[SET]
[SET].
4. Use [S] and [T] to select the city where you
will use the camera and then press [SET].
5. Use [S] and [T] to select the summer time
(DST) setting you want and then press [SET].
(pages 193, 197)
11
QUICK START BASICS
6. Use [S] and [T] to select the date format and then press [SET].
Example: December 19, 2007
To display the date like this:Select this option:
07/12/19YY/MM/DD
19/12/07DD/MM/YY
12/19/07MM/DD/YY
7. Set the date and the time.
Use [W] and [X] to select the setting you want (year, month, day, hour, minute) and then use [S] and [T] to change the setting.
To switch between 12-hour and 24-hour format, press [BS].
8. When settings are completed, press [SET].
9. Press [ON/OFF] to turn off the camera.
• After finishing this procedure, advance to the procedure on the next page.
12
QUICK START BASICS
E
Using a Memory Card
■ Loading a Memory Card into the Camera
When a memory card is loaded, the camera stores images you
shoot on the card.
NOT
• Though the camera has built-in memory, using a memory
card provides additional capacity you can use to store more
images, high-quality and large-size images, and longer
movies.
• The camera will store images in its built-in memory if there
is no memory card loaded. If you prefer to use built-in
memory, skip this procedure and go to “Shooting a
Snapshot” on page 15.
• For information about memory card capacity, see page
259.
1. Open the battery cover.
While pressing lightly on the cover,
1
slide it in the direction indicated by
2
the arrow to open.
2. Load a memory card into the camera.
MEMORY
Front
With the front of the memory card facing upwards (towards
the monitor screen side of the camera), slide it into the card
slot and press until it clicks securely into place.
CARD
FrontBack
3. Close the battery cover.
1
2
(page 45)
13
QUICK START BASICS
■ Formatting a Memory Card
Before you can use a memory card with your camera, you must
format it.
IMPORTANT!
• Formatting a memory card that already has snapshots or
other files on it, will delete its contents. Normally you do not
need to format a memory card again. However, if storing to
a card has slowed down or if you notice any other
abnormality, re-format the card.
• Be sure to perform the following procedure on the camera
to format the memory card.
5. Press [S] to select “Format” and then press
[SET].
• To cancel formatting, select “Cancel” and then press
[SET].
• Wait until the “Busy... Please wait...” message disappears
from the monitor screen before doing anything else.
“Set Up” Tab
1. Press [ON/OFF] to turn on the camera.
2. Press [MENU].
3. Use [W] and [X] to select the “Set Up” tab.
4. Use [T] to select “Format” and then press [X].
[ON/OFF] (Power)
[MENU]
QUICK START BASICS
14
Shooting a Snapshot
Auto icon
Operation Lamp
(page 58)
1. Press [] to turn on the camera.
This enters the REC mode and displays “” (Auto icon)
on the monitor screen.
2. Point the camera at the subject.
Focus Frame
Monitor Screen
Shutter Button
[] (REC)
3. While taking care to keep the camera still, half-
press the shutter button.
When the image is in focus, the camera will beep, the
operation lamp will light green, and the focus frame will turn
green.
4. Continuing to keep the camera still, press the
shutter button all the way down.
The recorded image will remain on the display for about one
second, and then it will be stored in memory. After that, the
camera will be ready to shoot the next image.
QUICK START BASICS
15
Snapshot Image Size and Image Quality
Your camera lets you select from among various image size
and quality settings. Note that image size and quality
settings affect how many images can be stored in memory.
• You can change the image size and quality settings as
required to shoot a smaller or lower-resolution image for
attachment to an e-mail message, for publishing on a
website, etc. You can also select an image size that suits
the size of paper you plan to use for printing your images.
For details, see pages 62, 64, and 259.
How do I half-press the shutter button?
The shutter button is designed to stop about half way down
when you press it lightly. Stopping at this point is called a
“half-press”. When you half-press the shutter button, the
camera automatically adjusts exposure and focuses on the
subject it is currently pointed at.
Mastering how much pressure is required for a half-press
and a full-press of the shutter button is an important
technique for good-looking images.
Half-press
Press lightly
until the
button stops.
Beep-beep!Click!
Full-press
All the way
16
QUICK START BASICS
■ Fully pressing the shutter button without
waiting for Auto Focus
Fully pressing the shutter button without waiting for Auto
Focus to operate will record using Quick Shutter (page 122).
Quick Shutter lets you capture exactly the moment you want.
• With Quick Shutter, the camera uses high-speed Auto
Focus, which means you can capture quick moving action
more easily. Note, however, that some images may be out
of focus when Quick Shutter is used.
• Whenever possible, take a little extra time to half-press
the shutter button in order to ensure proper focus.
Viewing Snapshots
(page 144)
[] (PLAY)
[W][X]
1. Press [] to enter the PLAY mode.
If there are multiple images in memory, use [W] and [X] to
scroll through them.
■ To return to the REC mode
Press [].
17
QUICK START BASICS
Shooting a Movie
Movie Icon
Remaining Recording Time
[] (REC)
(page 90)
1. Press [] to enter the REC mode.
2. Press [BS] (BEST SHOT).
3. Use [S], [T], [W], and [X] to select the “”
(Movie) scene and then press [SET].
“” (movie icon) remains on the monitor screen.
Recording Time
Movie Recording Screen
Shutter Button
[BS]
4. Press the shutter button to start shooting the
movie.
• Audio is also recorded during movie recording.
5. Press the shutter button again to stop
recording.
QUICK START BASICS
18
Movie Image Quality
Your camera lets you select from among six image quality
settings (UHQ, UHQ Wide, HQ, HQ Wide, Normal, LP) for
movies. To get the most out of the imaging capabilities of
your camera, use a quality setting of “HQ” (High Quality) or
“HQ Wide” or better.
Movie quality is a standard that determines the detail,
smoothness, and clarity of the image during playback.
Reducing image quality let’s you shoot longer, so you can
switch to “Normal”, or “LP” conserve remaining memory
capacity if you start to run low.
For details, see pages 90 and 260.
19
QUICK START BASICS
Viewing a Movie
The film-like frame that appears on the monitor screen indicates
that this is an image from a movie.
“” Movie icon
(page 146)
1. Press [] to enter the PLAY mode.
2. Use [W] and [X] to select the movie you want
to play.
When scrolling through images, a movie is displayed on the
monitor screen by showing its first frame.
[] (PLAY)
[SET]
[W] [X]
3. Press [SET] to start playback.
The monitor screen will return to the image selection screen
in step 2 after the end of the movie is reached.
• During movie playback, you can adjust volume, skip
forward and back, and perform other operations (page
147).
■ To return to the REC mode
Press [].
QUICK START BASICS
20
Deleting a File
You can use the following procedure to delete files you have
transferred to your computer’s hard disk, images you have
printed, or files you simply no longer need. This frees up
memory for recording more images.
[] (PLAY)
[S]
[SET]
(page 187)
1. Press [].
2. Press [T] ().
3. Use [W] and [X] to select the snapshot or
movie you want to delete.
4. Press [S] to select “Delete”.
• To cancel the delete operation, select “Cancel”.
5. Press [SET].
This deletes the selected snapshot or movie.
• If you want to delete more, repeat the above procedure
from step 3.
• To quit the delete operation, press [MENU].
[W] [X]
[T] ()
QUICK START BASICS
21
INTRODUCTION
Features
■ BEST SHOT for beautiful shots simply by
selecting a sample image built into the
camera
Simply select the scene that is
similar to what you want to shoot
(Night Scene Portrait, Flower,
etc.), for instant camera setups.
A dedicated [BS] button gives
you direct access to the BEST
SHOT library of sample scenes.
Example: Select for
beautiful
portraits.
■ Direct Mode Power On
To view images, press []
to power up in the PLAY
mode.
To record, press [] to
power up in the REC mode.
■ A powerful collection of useful recording
features
• Face recognition during image recording (page 82)
• Hand movement and subject movement reduction using high
shutter speed (page 102)
• High-sensitivity recording avoids dark images, even when the
flash is not being used (page 104)
• Quick Shutter, which helps you capture exactly the moment
you want (page 122)
• High quality (H.264) movie recording (page 90)
INTRODUCTION
22
■ Powerful Print Features
• DPOF feature for easy specification of date stamping and the
number of copies (page 206)
• Timestamp feature that stamps the date into the image data
(page 135)
• Support for PictBridge and USB DIRECT-PRINT for easy at-
home printing on a printer that supports one of these
standards, without a computer (page 202)
Read this first!
■ LCD Panel
The liquid crystal panel of the monitor screen uses highprecision technology that provides a pixel yield in excess of
99.99%.
This means that some pixels may not light or may remain lit at all
times. This is due to the characteristics of the liquid crystal
panel, and does not indicate malfunction.
23
INTRODUCTION
■ Copyrights
Except for your own personal enjoyment, unauthorized use of
snapshots or movies of images recorded with this camera
without the permission of the applicable right holder is forbidden
by copyright laws. In some cases, shooting of public
performances, shows, exhibitions, etc. may be restricted
entirely, even if it is for your own personal enjoyment.
Regardless of whether such files are purchased by you or
obtained for free, posting them on a website, a file sharing site,
or any other Internet site, or otherwise distributing them to third
parties without the permission of the copyright holder is strictly
prohibited by copyright laws and international treaties.
Uploading or distributing on the Internet images of TV programs,
live concerts, music videos, etc. that were photographed or
recorded by you may infringe upon the rights of others. Note that
CASIO COMPUTER CO., LTD. shall not be held liable for any
use of this product that infringes on the copyrights of others or
that violates copyright laws.
The trademarks and registered trademarks shown below are
used in an editorial fashion in the explanatory text of this manual
without trademark ™ or registered trademark ® symbols. No
infringement on trademarks is intended.
• The SDHC Logo is a trademark.
• Microsoft, Windows, Internet Explorer, Windows Media,
Windows Vista, and DirectX are either registered trademarks
or trademarks of Microsoft Corporation in the United States
and/or other countries.
• Macintosh, Mac OS, QuickTime, QuickTime logo, and iPhoto
are trademarks of Apple Inc. in the United States and/or other
countries.
• MultiMediaCard is a trademark of Infineon Technologies AG
of Germany, and licensed to the MultiMediaCard Association
(MMCA).
• MMCplus is a trademark of the MultiMediaCard Association.
• Adobe and Reader are either registered trademarks or
trademarks of Adobe Systems Incorporated in the United
States and/or other countries.
• HOTALBUM and the HOT ALBUM logo are registered
trademarks or trademarks of Konica Minolta Photo Imaging,
Inc., and licensed to HOTALBUMcom, Inc.
• YouTube, the YouTube logo and “Broadcast Yourself” are
either registered trademarks or trademarks of YouTube, LLC.
• EXILIM, Photo Loader, Photo Transport, and YouTube
Uploader for CASIO are registered trademarks or trademarks
of CASIO COMPUTER CO., LTD.
24
INTRODUCTION
• Photo Loader with HOT ALBUM was developed based on
HOT ALBUM, which is copyrighted by HOTALBUMcom, Inc.,
and Photo Loader, which is copyrighted by CASIO
COMPUTER CO., LTD. All copyrights and other rights revert
to original copyright holders.
• All other company or product names mentioned herein are
registered trademarks or trademarks of their respective
companies.
Any and all unauthorized commercial copying, distribution, and
copying of the bundled software over a network are prohibited.
This product’s YouTube upload functionality is included under
license from YouTube, LLC. The presence of YouTube upload
functionality in this product is not an endorsement or
recommendation of the product by YouTube, LLC.
25
INTRODUCTION
• The contents of this manual are subject to change without
notice.
• The content of this manual has been checked at each step
of the production process. Please contact us if you notice
anything that is questionable, erroneous, etc.
• Any copying of the contents of this manual, either in part or
its entirety, is forbidden. Except for your own personal use,
and other use of the contents of this manual without the
permission of CASIO COMPUTER CO., LTD. is forbidden under copyright laws.
• CASIO COMPUTER CO., LTD. shall not be held liable for
any damages or loss suffered by you or any third party due
to the use or malfunction of this product.
• CASIO COMPUTER CO., LTD. shall not be held liable for
any damages or loss suffered by you or any third party due
to the use of Photo Loader with HOT ALBUM, Photo
Transport, and/or YouTube Uploader for CASIO.
• CASIO COMPUTER CO., LTD. shall not be held liable for
any damages or loss caused by deletion of memory contents
due to malfunction, repair, or any other reason.
• Note that the example screens and product illustrations
shown in this manual may differ somewhat by the screens
and configuration of the actual camera.
26
INTRODUCTION
Precautions during Use
■ Take test shots before shooting the final
shot.
• Before shooting your final image, shoot a test shot to ensure
that the camera is recording correctly.
■ Avoid Use While In Motion
• Never use the camera to record or play back images while
operating an automobile or other vehicle, or while walking.
Looking at the monitor while in motion creates the risk of
serious accident.
■ Directly Viewing the Sun or Bright Light
• Never look at the sun or any other bright light through the
cameras viewfinder. Doing so can damage your eyesight.
■ Flash
• Never use the flash unit in areas where flammable or
explosive gas may be present. Such conditions create the risk
of fire and explosion.
• Never fire the flash in the direction of a person operating a
motor vehicle. Doing so can interfere with the driver’s vision
and creates the risk of accident.
• Never fire the flash too close to the eyes of the subject. Doing
so creates the risk of loss of eyesight.
27
INTRODUCTION
■ Display Panel
• Do not apply strong pressure to the LCD panel surface or
subject it to strong impact. Doing so can cause the display
panel glass to crack.
• Should the display panel ever become cracked, never touch
any of the liquid inside the panel. Doing so creates the risk of
skin inflammation.
• Should display panel liquid ever get into your mouth,
immediately rinse your mouth out and contact your physician.
• Should display panel liquid ever get into your eyes or onto
your skin, immediately rinse with clean water for at least 15
minutes and contact your physician.
■ Connections
• Never plug any devices that are not specified for use with this
camera into connectors. Connecting a non-specified device
creates the risk of fire and electric shock.
■ Transport
• Never operate the camera inside of an aircraft or anywhere
else where operation of such devices is restricted. Improper
use creates the risk of serious accident.
■ Smoke, abnormal odor, overheating, and
other abnormalities
• Continued use of the camera while it is emitting smoke or
strange odor, or while it is overheating creates the risk of fire
and electric shock. Immediately perform the following steps
whenever any of the above symptoms are present.
1. Turn off the camera.
2. Remove the battery from the camera, taking care to
protect yourself against burn injury.
3. Contact your dealer or nearest CASIO authorized service
center.
28
INTRODUCTION
■ Water and Foreign Matter
• Water, other liquids, or foreign matter (especially metal)
getting inside the camera creates the risk of fire and electric
shock. Immediately perform the following steps whenever any
of the above symptoms are present. Particular care is
required when using the camera where it is raining or
snowing, near the ocean or other body of water, or in a
bathroom.
1. Turn off the camera.
2. Remove the battery from the camera.
3. Contact your dealer or nearest CASIO authorized service
center.
■ Dropping and Rough Treatment
• Continued use of the camera after it is damaged by dropping
or other rough treatment creates the risk of fire and electric
shock. Immediately perform the following steps whenever any
of the above symptoms are present.
1. Turn off the camera.
2. Remove the battery from the camera.
3. Contact your dealer or nearest CASIO authorized service
center.
■ Keep Away From Fire
• Never expose the camera to fire, which can cause it to
explode and creates the risk of fire and electric shock.
29
INTRODUCTION
■ Disassembly and Modification
• Never try to take the camera apart or modify it in any way.
Doing so creates the risk of electric shock, burn injury, and
other personal injury. Be sure to leave all internal inspection,
maintenance, and repair up to your dealer or nearest CASIO
authorized service center.
■ Locations To Be Avoided
• Never leave the camera in any of the following types of
locations. Doing so creates the risk of fire and electric shock.
–Areas subject to large amounts of humidity or dust
– Food preparation areas or other locations where oil smoke
is present
– Near heaters, on a heated carpet, in areas exposed to
direct sunlight, in a closed vehicle parked in the sun, or
other areas subject to very high temperatures
• Never place the camera on an unstable surface, on a high
shelf, etc. Doing so can cause the camera to fall, creating the
risk of personal injury.
■ Backing Up Important Data
• Always keep backup copies of important data in camera
memory by transferring it to a computer or other storage
device. Note that data can be deleted in the case of camera
malfunction, repair, etc.
■ Memory Protection
• Whenever replacing the battery, be sure to follow the correct
procedure as described in the documentation that comes with
the camera. Incorrectly replacing the battery can result in
corruption or loss of data in camera memory.
30
INTRODUCTION
Loading...
+ 235 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.