Casio DQ-981 User Manual

MA1507-EA

Operation Guide DQ-981

 A sticker is afﬁ xed to the glass of the clock when you purchase it. Be sure to remove the sticker before using

the clock.

 Depending on the clock model, the conﬁ guration of your clock may differ somewhat from that shown in the

illustration.

Alarm Off

PM indicator

Current time (Hour, minutes, seconds)

Snooze Alarm On

Snooze on indicator

DATE (month - date)

Day of the week

Current Humidity

Current Temperature

Alarm time

Alarm on indicator

GENERAL GUIDE

73 4

Alarm Mode selector

SNZ: Snooze alarm on ON: Alarm on OFF: Alarm off

DEMO button

Press this button to test the alarm sound.

°C/°F button

Press this button to toggle the temperature units between Celsius and Fahrenheit.

SET button

Use this button when setting the current time.

RESET button

Press this button to reset the clock after replacing its batteries.

SNOOZE/LIGHT button

 Press this button to illuminate the display for about ﬁ ve seconds.  Pressing this button while the alarm is sounding stops the alarm.

+ (UP) / – (DOWN) buttons

Use these buttons to change the alarm time or the setting that is ﬂ ashing on the display.

Operation Guide DQ-981

USING THE CLOCK

1. Press the SET button (4) to cycle through the setting screens as shown below.

Normal Timekeeping Screen Year Setting Screen

Contrast Setting Screen Month and Day Setting Screen

12-hour/24-hour Setting Screen Time Setting Screen

2. While the screen you want is displayed, use the – (DOWN) and + (UP) buttons (7) to change the ﬂ ashing digits.

 Holding down + (UP) or – (DOWN) changes the ﬂ ashing digits at high speed.  You can set the year in the range of 2000 to 2099. The day of the week is set automatically in accordance

with the date setting.

 Pressing + (UP) or – (DOWN) while the Time Setting Screen is on the display causes the seconds count to be

reset to 00.

 Each press of + (UP) or – (DOWN) while the 12-hour/24-hour Setting Screen is on the display toggles between

12-hour and 24-hour timekeeping.

 You can set the contrast level in the range of 1 to 10.

3. After making the settings you want, use the SET button (  The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display

for about three minutes without performing any operation.

) to display the Normal Timekeeping Screen.

USING THE ALARM

The alarm sounds when the alarm time you set is reached. You can also use the Alarm Mode selector (1) to select the snooze alarm feature.

Setting the Alarm Time

Use the – (DOWN) and + (UP) buttons (7) to set the alarm time. Pressing the – (DOWN) and + (UP) buttons ( display.

Press to change the alarm time setting (–). Press to change the alarm time setting (+).

 Holding down + (UP) or – (DOWN) changes the digits at high speed.

Turning the Alarm On and Off

Use the Alarm Mode selector (1) to turn the alarm on and off, and to select the snooze feature.

Alarm Mode selector Description

SNOOZE ( )

)

(

OFF The alarm does not sound.

 The alarm time appears in place of the date on the display whenever the Alarm Mode selector (

or SNZ.

 The alarm sound changes over ﬁ ve levels as it sounds.

Stopping the Alarm

 When alarm is sounding, press the SNOOZE/LIGHT button (6) to stop it. When the snooze feature is turned

on, the alarm will sound again in about ﬁ ve minutes.

 To turn off the snooze feature, slide the Alarm Mode selector (

The alarm sounds at the preset time for one minute, and seven more times every ﬁ ve minutes thereafter. Even if you stop the alarm by pressing the SNOOZE/

LIGHT button (

 The indicator

activated.

The alarm sounds at the preset time for one minute.

) causes the alarm time to appear in place of the date on the

), the alarm sounds again about ﬁ ve minutes later.

ﬂ ashes on the display to indicate that the snooze feature is

) is set to ON

) to OFF.

Press – (DOWN) to decrease the ﬂ ashing digits.

Press + (UP) to increase the ﬂ ashing digits.

+ 1 hidden pages