Casio DQ-745S Owner's Manual

MA1205-EA

©

2012 CASIO COMPUTER CO., LTD.

ILLUSTRATION

Operation Guide DQ-745S

1

2

3

78

• A sticker is affixed to the glass of the clock when you purchase it. Be sure to remove the sticker before using the
clock.

• Depending on the clock model, its configuration may differ somewhat from that shown in the illustration.

PM indicator

Date
(month - day)

Alarm Off Snooze Alarm On

Current time
(Hour, minutes,
seconds)

Day of the week

Current temperature

Alarm time

Alarm on
indicator

Snooze on
indicator

1

Operation Guide DQ-745S

GENERAL GUIDE

11

1 SNOOZE/LIGHT button

11

• Press this button to illuminate the display for about five seconds.

• Pressing this button while the alarm is sounding stops the alarm.

22

2 Alarm Mode selector

22

SNZ: Snooze alarm on
ON: Alarm on
OFF: Alarm off

33

3 + / – buttons

33

Use these buttons to change the alarm time or the setting that is flashing on the display.

44

4 SOUND Selector

44

Use this selector to select the alarm volume.

55

5 DEMO button

55

Press this button to test the alarm sound.

66

6

°C/°F button

66

Press this button to toggle the temperature units between Celsius and Fahrenheit.

77

7 SET button

77

Use this button when setting the current time.

88

8 RESET button

88

Press this button to reset the clock after replacing its batteries.

USING THE CLOCK

1. Press the SET button (7) to cycle through the setting screens as shown below.

Normal Timekeeping Screen Contrast Setting Screen

Year Setting Screen

2. While the screen you want is displayed, use the + and – buttons (3) to change the flashing digits.

Press – to
decrease
the flashing
digits.

• Holding down + or – changes the flashing digits at high speed.

• You can set the year in the range of 2000 to 2099. The day of the week is set automatically in accordance with

the date setting.

• Pressing + or – while the Time Setting Screen is on the display causes the seconds count to be reset to 00.

• Each press of + or – while the 12-hour/24-hour Setting Screen is on the display toggles between 12-hour and

24-hour timekeeping.

• You can set the contrast level in the range of 1 to 10.

3. After making the settings you want, use the SET button (7) to display the Normal Timekeeping Screen.

• The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display
for about three minutes without performing any operation.

Setting Screen

12-hour/24-hour

Setting Screen

Time Setting ScreenMonth and Day

Press + to
increase
the flashing
digits.

2