Casio 3419 Operation Manual

Page 1

MA1405-EB

#!3)/#/-054%2#/,4$

Operation Guide 3419

Congratulations upon your selection of this CASIO watch.

To ensure that this watch provides you with the years of service for which it is designed, carefully read and follow the instructions in this manual, especially the information under “Operating Precautions” and “User Maintenance”. Be sure to keep all user documentation handy for future reference.

Bluetooth® is a registered trademark or trademark of Bluetooth SIG, Inc. of the United States.

E-1

Mobile Link Function

This product includes functions that allow it to communicate with Bluetooth (referred to as “Bluetooth” in this manual) capable mobile phones and other devices, to sound an alert tone, perform vibration alert, and display alerts when a phone call and/or mail is received on your phone, etc. (Mobile Link Function)

x This product complies with or has received approval under radio laws in various

countries and geographic areas. Use of this product in an area where it does not conform to or where it has not been approved under applicable radio laws may be punishable under local laws. For details, see the separate “List of Countries and Geographic Areas where Product Conforms to Radio Laws or Has Been Approved”.

x Use of this product inside of an aircraft is restricted by the aviation laws of each

country. Be sure to obey instructions provided by ﬂ ight personnel concerning use of devices such as this product.

x For Mobile Link operational procedures and a Q&A, go to the website below.

CASIO website: http://world.g-shock.com/ble/guide/

E-2

◆ Stopwatch .................................................................................. Page E-37

The stopwatch measures elapsed time up to 1,000 hours in 1/100-second increments.

◆ Timer .......................................................................................... Page E-40

The timer counts down from a preset start time, and the watch sounds a tone or vibrates when the countdown reaches zero.

E-4

To conﬁ gure the Summer Time (DST) setting ..................................................E-26

Alarms and Hourly Time Signal ..........................................................................E-28

To enter the Alarm Mode................................................................................E-28

To change an alarm setting ............................................................................E-30

To stop a tone/vibration alert operation ..........................................................E-35

To test the alarm ............................................................................................E-36

Stopwatch ........................................................................................................... E-37

To enter the Stopwatch Mode ........................................................................E-37

To measure time with the stopwatch ..............................................................E-38

Timer ................................................................................................................... E-40

To enter the Timer Mode ................................................................................E-40

To set the timer start time ..............................................................................E-41

To perform a countdown ................................................................................E-42

To stop a tone/vibration alert operation ..........................................................E-43

E-6

4.0

Features

Your watch provides you with the features and functions described below.

◆ Communication with your mobile phone ..........Visit the CASIO website

Connect with a Bluetooth enabled mobile phone and communicate with it. For more information, visit the “User’s Guide for Mobile Link Functions” page at the CASIO website.

◆ World Time ................................................................................ Page E-24

Instantly view the current time in 100 cities around the globe.

◆ Alarms ........................................................................................ Page E-28

The watch can be conﬁ gured to sound a tone or vibrate when a preset alarm time is reached.

Contents

Features ................................................................................................................ E-3

About this User’s Guide ........................................................................................ E-8

Display Types ..................................................................................................E-8

Tap Operations ................................................................................................E-9

Button Names and Display Indications ............................................................E-10

Display Indicators ..........................................................................................E-12

Using Modes ....................................................................................................... E-14

Mode Overview ..............................................................................................E-16

Adjusting the Time Setting .................................................................................E-18

Conﬁ guring Current Time and Date Settings Manually .....................................E-19

World Time .......................................................................................................... E-24

To view the times in other time zones .............................................................E-24

Illumination .......................................................................................................... E-44

To illuminate the display .................................................................................E-44

Using Auto Light ............................................................................................E-45

To specify the illumination duration .................................................................E-48

Other Settings ..................................................................................................... E-50

To turn the button operation tone on or off .....................................................E-50

To change the alarm/timer alert method .........................................................E-52

Low Battery Indication ........................................................................................ E-54

Speciﬁ cations .....................................................................................................E-56

Operating Precautions ....................................................................................... E-m1

User Maintenance ............................................................................................ E-m11

E-3

E-5

E-7

About this User’s Guide

Display Types

Depending on the model of your watch, display text appears either as dark ﬁ gures on a light background or light ﬁ gures on a dark background. All sample displays in this manual are shown using dark ﬁ gures on a light background.

x Note that the display style of a watch is ﬁ xed. You cannot switch between styles.

E-8

Tap Operations

The word “tap” in this manual refers to striking the center of watch display with your ﬁ ngertip.

Example:

Tap twice to stop an ongoing tone or vibration alert for a watch alarm.

How to tap:

Lightly strike the watch display twice with the tip of your ﬁ nger. (double-tap)

Important!

x The tap function is enabled only while the Tap indicator is ﬂ ashing on the watch

display.

x The Tap indicator ﬂ ashes automatically whenever the tap function is enabled

and can be used to stop a watch alarm or time up alert, etc.

Tap indicator

E-9

Page 2

Operation Guide 3419



Button Names and Display Indications

Operations on this watch are performed using buttons A through D. The illustration below shows the locations and the meanings of the different buttons and display indicators.

See “Using Modes” (page E-14).

Day of the week

(Illuminates display)

PM indicator (no display for AM)

Hour, minutes, seconds

E-10

Month, day

Display Indicators

  









 

Number Name Meaning More Info

Vibration indicator

Auto Light indicator Auto light enabled. E-46

Power Saving indicator

E-12

Vibration alert turned on for alarms/ timer.

Mobile Link functions availability limited to save power.



E-53

CASIO

website*

Using Modes

Each press of C cycles between modes as shown in the illustration below.

Timekeeping Mode Control Mode* World Time Mode

Note

x The names shown above are used in the button operation explanations throughout

this User’s Guide.

x Note that the illustrations in this User’s Guide are intended for reference only. The

actual watch may appear somewhat different than depicted in the illustrations.

Number Name Meaning More Info

Bluetooth icon Mobile Link functions enabled.

DST indicator

PM indicator

Hourly time signal indicator Hourly time signal turned on. E-33

Alarm indicator Alarm turned on. E-33

Snooze indicator Snooze turned on. E-33

Mute indicator Button operation tone disabled. E-51

Tap indicator (ﬂ ashing) Double-tap operation is enabled. E-9

Alert indicator

Summer time turned on (time advanced by one hour).

Indicates p.m. times during 12-hour timekeeping.

Alerts an incoming call, email receipt, or some other phone event.

CASIO

website*

E-26

E-10

CASIO

website*

* Visit the “User’s Guide for Mobile Link Functions” page of the CASIO website.

* For information about the Control Mode and Setup Mode, visit the CASIO website

at: http://world.g-shock.com/ble/guide/.

Alarm Mode Stopwatch Mode Timer Mode Setup Mode*

E-11

E-13

 

E-14

Mode Overview

Mode Functions More Info

Timekeeping Mode

Control Mode

World Time Mode

Alarm Mode

Stopwatch Mode x Elapsed time measurement E-37 Timer Mode x Start time settings; countdown E-40

E-16

x Current time display x Time, date, summer time settings; 12/24-hour display

switching

x Manual time adjustment x Alarm/timer alert method settings

x Remote operation and information acquisition by data

communication (Control Function)

x Current time in 100 cities (35 time zones) around

the globe

x Alarm time and on/off settings x Hourly time signal on/off

E-14 E-18

E-52

CASIO

website

E-24

E-28

Adjusting the Time Setting

When Mobile Link is enabled, the watch’s time and date settings are automatically adjusted to match those of the phone. When Mobile Link is disabled, you should adjust the time and date settings manually.

  

Mode Functions More Info

Setup Mode

Note

x For information about Mobile Link functions, visit the “User’s Guide for Mobile Link

Functions” page of the CASIO website.

x For conﬁ guring duration, method, and other settings

for alerts from the phone

CASIO

website

Conﬁ guring Current Time and Date Settings Manually

◆ To conﬁ gure time and date settings

In the Timekeeping Mode, hold down A for about two seconds until the time

●

zone setting screen appears.

[SET Hold] will appear on the watch display, followed by the time zone setting screen.

E-15

E-17

Time zone

E-18

E-19

Page 3

Operation Guide 3419

Use C to select the item whose setting you want to change.

●

Each press of C cycles through available settings in the sequence shown below.

Time Zone

Alarm/Timer Alert Method

Display illumination duration

E-20

Use B and D to change the currently selected setting as described below.

●

Screen Setting Operation

E-22

C C

Summer time

Power Saving

Time zone of the city where you will use the watch

Summer time on/off

12-hour (12H)/24-hour (24H) timekeeping switching

Seconds 00-reset

x From 30 to 59 seconds, resetting adds 1 to

the minute setting.

Hour and minutes settings

Year, month, day settings

Minute

Year

12/24-hour timekeeping

Hour

Month

Operation tone on/off

Use B and D.

Press D.

Use B and D.

Seconds

Day

World Time

World Time lets you display the current time in any one of 100 cities (35 time zones) around the world.

To view the times in other time zones

In the Timekeeping Mode, press C twice to enter the World Time Mode.

●

City name

See “Using Modes” (page E-14).

The name of the currently selected World Time City will appear.

Note

x The numbers in the above diagram indicate how many times you need to press C

to display each setting.

x Power Saving is a function that saves power by limiting the availability of Mobile

Link functions. For more information, visit the “User’s Guide for Mobile Link Functions” page at the CASIO website.

Note

x Refer to the “City Name List” (back of this manual) to determine the time zone of

the city where you will be using the watch.

- Summer time, or Daylight Saving Time (DST) as it is known in some countries, calls for setting clocks ahead one hour from standard time during the summer season. Note that the period during which and the areas where summer time is applied depend on each country. Some countries or geographic areas may not use summer time.

- The DST indicator will be on the display and timekeeping will be advanced by one hour when summer time is turned on.

- The watch’s Full Auto Calendar automatically makes adjustments in the day setting to account for different length months and leap year.

After all the settings are the way you want, press A to return to the

●

Timekeeping Mode.

Use D to scroll through the World Time Mode city names.

●

See “City Name List” (back of this manual).

x Scrolling to a city name displays the current time in that city. x Holding down D scrolls at high speed. x To display the UTC city name (UTC offset 0), press B and D at the same

time.

x Pressing A causes the currently selected city name to scroll across the

display from the beginning of the name.

To return to the Timekeeping Mode, press C ﬁ ve times.

●

E-21

E-23

Current time in World Time city

E-24

To conﬁ gure the Summer Time (DST) setting

In the World Time Mode, hold down A for about two seconds.

●

DST indicator

Important!

x Even when Mobile Link is enabled, you need to turn the summer time (DST) on

or off manually for World Time.

E-26

x [DST Hold] will appear on the display. After that,

[DST Hold] will disappear and the summer time setting will toggle to either on or off.

x DST on the display indicates that summer time is

turned on.

Alarms and Hourly Time Signal

You can set up to ﬁ ve different alarms. When any one of the alarm times is reached the watch will sound an alarm tone or vibrate for about 10 seconds. In the case of snooze, the alarm will sound up to seven times at ﬁ ve-minute intervals. The hourly time signal causes the watch to sound a tone or vibrate every hour on the hour.

See “To change the alarm/timer alert method” (page E-52).

To enter the Alarm Mode

In the Timekeeping Mode, press C three times to enter the Alarm Mode.

●

See “Using Modes” (page E-14).

An alarm setting screen (Alarm 1 through Alarm 4, Snooze, or hourly time signal) will appear.

E-28

Note

x Summer time, or Daylight Saving Time (DST) as it is known in some countries,

calls for setting clocks ahead one hour from standard time during the summer season. Note that the period during which and the areas where summer time is applied depend on each country. Some countries or geographic areas may not use summer time.

x The DST indicator will be on the display and timekeeping will be advanced by one

hour when summer time is turned on.

x The summer time setting cannot be changed for the UTC World Time zone. x The summer time setting is applied to the currently selected time zone only. A

setting conﬁ gured for one time zone does not affect any other time zone.

Alarm setting screen

Alarm number

Note

x If you do not perform any operation for about two or three minutes while in the

Alarm Mode, the watch will automatically return to the Timekeeping Mode.

Hourly time signal setting screen

E-25

E-27

E-29

Page 4

Operation Guide 3419

To change an alarm setting

In the Alarm Mode, use D to select the alarm whose setting you want to

●

change.

Alarm 1

( )

Hourly Time Signal ( )

D D

Alarm 2

( )

Snooze Alarm

( )

D D

Alarm 3

( )

Alarm 4

( )

Use A to toggle the displayed setting between on and off.

●

Alarm 1 through Alarm 4

: Alarm does not sound.

: Alarm sounds only once at the preset time and does not sound again after

that.

: Alarm sounds at the preset time each day.

Hourly time signal

: Hourly time signal does not sound.

: Hourly time signal sounds every hour on the hour.

E-30

Snooze

: Alarm does not sound.

: Alarm sounds at the preset time, and up to seven times at ﬁ ve-minute intervals

thereafter. This operation is performed only once.

: Alarm sounds at the preset time, and up to seven times at ﬁ ve-minute intervals

thereafter. This operation is performed at the preset time each day.

E-32

To change an alarm time setting, hold down A for about two seconds until

●

the hour digits of the current alarm time start to ﬂ ash.

Each press of C causes the ﬂ ashing to move between the hour and the

●

minutes digits.

The ﬂ ashing digits are the ones that are selected.

Use B and D to change the ﬂ ashing setting, and set the hour and minutes

●

you want.

x Holding down either button scrolls the setting at high speed. x If you are using 12-hour timekeeping, the PM indicator will appear for times

between noon and 11:59 p.m.

E-34

[SET Hold] will appear on the display. After that, [SET Hold] will disappear and the hour digits will ﬂ ash.

The alarm indicator is displayed while any alarm (Alarm 1 through Alarm 4) is turned on, while the Hourly Time Signal indicator is displayed while the hourly time signal is turned on. While snooze is turned on, the Alarm Indicator and Snooze Indicator are both displayed.

After all the settings are the way you want, press A to exit the setting

●

screen.

To return to the Timekeeping Mode, press C four times.

●

To stop a tone/vibration alert operation

Double-tapping the center of the watch display or pressing any one of the

●

buttons will stop an ongoing tone/vibration alert operation.

Note

x In the case of snooze, the alarm will sound up to seven times at ﬁ ve-minute

intervals.

x The Snooze Indicator (SNZ) will ﬂ ash on the display during the ﬁ ve-minute intervals

between alarms.

x Snooze will be canceled when any of the following occurs while the Snooze

Indicator (SNZ) is ﬂ

- Disabling snooze

Alarm on

Alarm indicator

ashing on the display.

Hourly time signal on

Hourly time signal indicator

E-31

E-33

E-35

- Displaying the snooze setting screen

- Displaying the Timekeeping Mode setting screen

To test the alarm

In the Alarm Mode, hold down D to perform the tone/vibration alert

●

operations.

E-36

To measure time with the stopwatch

The following shows button operations for stopwatch operations.

●

x Elapsed time/cumulative time

Start Stop (Restart) (Stop) Reset

x Split time (paused elapsed time reading)

Start Split Split time display

Pressing A while timing is being performed displays the split time (with [SPLIT] ﬂ ashing), but elapsed timing continues internally.

E-38

D D D A

A A D A

cancel

Stop Reset

Stopwatch

The stopwatch measures elapsed time in units of 1/100 seconds up to 999 hours, 59 minutes, 59.99 seconds. Elapsed time returns to zero automatically and timing continues from there when the maximum limit is reached.

To enter the Stopwatch Mode

Hours

Minutes 1/100 second

Seconds

Note

x Once started, elapsed time measurement continues until you press D to stop

it, even if you change to a different mode and even if the stopwatch reaches the elapsed time measurement limit.

x If you change to another mode while a split time is frozen on the display, split

time display will be canceled.

In the Timekeeping Mode, press C four times to

●

enter the Stopwatch Mode.

See “Using Modes” (page E-14).

E-37

E-39

Page 5

Operation Guide 3419

Timer

The timer start time can be set in one-second increments up to 100 hours. The watch will sound a tone or vibrate for about 10 seconds when the end of the timer countdown is reached.

See “To change the alarm/timer alert method” (page E-52).

To enter the Timer Mode

Hours

Minutes 1/10 second

Seconds

E-40

Use B and D to change the currently ﬂ ashing digits (hours, minutes, or

●

seconds).

x Holding down either button scrolls the setting at high speed. x To specify a start time of 100 hours, set the timer to 0H00'00".

After all the settings are the way you want, press A to exit the setting

●

screen.

To perform a countdown

The following shows button operations for a countdown.

●

Start Stop (Restart) (Stop) Reset

Note

x A tone/vibration alert is performed for about 10 seconds when the end of the

countdown is reached, and the display returns to the screen that was shown before the countdown was started.

E-42

In the Timekeeping Mode, press C ﬁ ve times to

●

enter the Timer Mode.

See “Using Modes” (page E-14).

D D D A

Illumination

You can use the procedure below to illuminate the display for easy reading in the dark. The watch also has an Auto Light function that illuminates the display whenever the watch is angled towards your face for reading.

To illuminate the display

Press B to illuminate the display.

●

Note

x Illumination will turn off automatically if it is on when an alarm alert, incoming

call alert, or any alert operation starts.

◆ Light Use Precautions

Frequent use of the light can shorten battery life.

To set the timer start time

In the Timer Mode, hold down A for about two seconds.

●

Each press of C causes the ﬂ ashing to move between the hours, minutes,

●

and seconds digits.

The ﬂ ashing digits are the ones that are selected.

x Even if you exit the Timer Mode while a timer countdown is ongoing, the

countdown will continue and the tone/vibration alert operation will be performed when the end of the countdown is reached.

To stop a tone/vibration alert operation

Double-tapping the center of the watch display or pressing any one of the

●

buttons will stop an ongoing tone/vibration alert operation.

Using Auto Light

When Auto Light is enabled, angling the watch towards your face at an angle of 40˚ or greater will illuminate the display automatically.

Note

x Auto Light is disabled automatically while an alarm is sounding.

[SET Hold] will appear on the display. After that, [SET Hold] will disappear and the hours digits will ﬂ ash.

Note

x If a timer countdown operation is in progress, press

D to stop it and then press A to reset the timer to its start time before performing the above step.

x If a timer countdown operation is paused, press A

to reset the timer to its start time before performing the above step.

40˚ or greater

E-41

E-43

E-44

◆ To enable/disable Auto Light

Auto Light indicator

E-46

To specify the illumination duration

E-48

In the Timekeeping Mode, hold down B for at least

●

three seconds.

This will toggle Auto Light between enabled (LT indicator displayed) and disabled (no indicator displayed).

In the Timekeeping Mode, hold down A for about

●

two seconds until the time zone setting screen appears.

Press C 10 times to display the illumination

●

duration setting screen.

See “Conﬁ guring Current Time and Date Settings Manually” (page E-19).

The screen will show either [LT1] or [LT3].

◆ Auto Light Precautions

x The Auto Light may not operate properly when the watch is angled towards your

face from an angle greater than about 15 degrees as shown in the illustration

below.

Press D to toggle the illumination duration setting between [LT1]

●

(1.5seconds) and [LT3] (3 seconds).

To return to the Timekeeping Mode, press A.

●

x Leaving Auto Light enabled can run down the watch’s battery

due to frequent display illumination.

x Electro-static charge or magnetism can interfere with proper Auto

Light operation. If this happens, try lowering your arm and then angle it towards your face again.

x When moving the watch you may note a slight rattling sound.

This is due to operation of the Auto Light switch, which determines the current orientation of the watch. It does not indicate malfunction.

x Auto Light will remain enabled for about 6 hours after you turn it

on. After that Auto Light will disable automatically.

E-45

E-47

E-49

Page 6

Operation Guide 3419

Other Settings

You can use the procedures in this section to turn the tone that sounds when you press a button on or off. You can also select either tone or vibration as the alert method for the alarm and timer.

To turn the button operation tone on or off

In the Timekeeping Mode, hold down A for about

●

two seconds until the time zone setting screen appears.

E-50

To return to the Timekeeping Mode, press A.

●

Note

x The above procedure affects the button operation tone only. The alarm, hourly time

signal, and time up alarm are not affected.

To change the alarm/timer alert method

In the Timekeeping Mode, hold down A for about

●

two seconds until the time zone setting screen appears.

Press C 11 times to display alert setting screen.

●

See “Conﬁ guring Current Time and Date Settings Manually” (page E-19). The screen will show either [VIB] or [BEEP].

E-52

Low Battery Indication

A low battery indicator appears on the display when battery voltage drops below a certain level. Availability of some functions becomes limited while the low battery indicator is displayed. If the low battery indicator remains on the display, have the battery replaced as soon as possible.

Note

x For information about battery life guidelines and supported battery types, see the

product speciﬁ

See “Speciﬁ

cations.

cations” (page E-56).

Press C nine times to display the button operation

●

tone setting screen.

See “Conﬁ guring Current Time and Date Settings Manually” (page E-19).

The screen will show either [KEY

Press D to toggle the setting between [KEY ] (ON)

●

and [MUTE] (OFF).

When [MUTE] (OFF) is selected, a Mute indicator is displayed to indicate that the button operation tone will not sound.

Mute indicator

Press D to toggle the setting between [VIB] and [BEEP].

●

The Vibration indicator is shown on the display while [VIB] is selected.

: Alert by vibration.

: Alert by tone.

Tone alert

To return to the Timekeeping Mode, press A.

●

The following describes how display of the low battery indicator affects watch operation.

Low Battery indicator

Note

x Repeated use of Mobile Link functions, display illumination, tone/vibration alert,

or other functions over a short period can result in a momentary drop in battery

voltage. This can cause temporary display of the low battery indicator and limited

availability of some watch functions.

x The watch enters the Timekeeping Mode. x Bluetooth connection turns off and Mobile Link is

disabled.

x Display illumination becomes disabled. x Alert sound and vibration become disabled. x Double-tap operation becomes disabled.

Vibration indicator

] or [MUTE].

Vibration alert

E-51

E-53

E-54

Speciﬁ cations

Accuracy at normal temperature

Basic Functions

World Time : Current time in 100 cities (35 time zones) + UTC (Universal

Alarms and Hourly Time Signal

E-56

Mobile Link Functions

E-58

:±15 seconds a month

: Hour, minutes, seconds; a.m./p.m. (P); 12/24-hour timekeeping

format; Month, day, day of the week; Full auto calendar (2000 to

2099); Summer time setting

Coordinated Time) time display; Summer time setting

: Alarms

5 daily alarms with 1 snooze alarm Setting units: Hour, minute Tone or vibration alert: 10 seconds

Hourly time signal

Beeps or vibrates every hour on the hour

: Time Correction

Auto correction/manual correction

Alert

Tone and/or vibration alert for incoming calls, incoming mail, incoming SNS, calendar alert, etc. Information display (last received information)

Phone ﬁ nder

Watch operation sounds the alert sound of the mobile phone.

Data Communication Speciﬁ cations

v4.0 (Bluetooth® low energy technology compatible)

Bluetooth Data rate: 1 Mbps Transmission output: 0 dBm (1 mW) Communication range: 2 meters max. (depends on environment) Encryption: 128 bit AES

E-55

Stopwatch : Measuring unit: 1/100 second

Countdown Timer

Other : Low battery alert; Auto return to Timekeeping Mode; Power Saving;

Battery : One lithium battery (Type: CR2032)

Approximate Battery Life

Measuring capacity: 999:59'59.99" (1000 hours) Measuring accuracy: Measurement functions: Elapsed time, cumulative time, split times

: Countdown unit: 1/10 second

Countdown range: 100 hours Measuring accuracy: Setting unit: 1 second Time up alert: 10-second tone or vibration

Vibration alert; Tap function; High-brightness LED light; Auto Light; Selectable illumination duration; Operation tone on/off

: 2 years

Usage Conditions

• Mobile Link operation: 12 hours/day

• Control function: 2 hours/day

• Incoming call alert: 3 times (tone and vibration for 5 seconds)/day

• Incoming mail, other alerts: 10 times (tone only for 5 seconds)/day

• Illumination: Once (1.5 seconds)/day

• Alarm: Once (tone only for 10 seconds)/day

Approximate battery life can be shortened by more frequent operation.

0.0006%

E-57

E-59

Page 7

Operation Guide 3419

City Name List

L-1

City Name List

City Name

（UTC） Reykjavik Lisbon Casablanca London Madrid Paris Algiers Brussels Amsterdam Zurich

L-2

City Name

Chihuahua Denver Mexico City Winnipeg Dallas Houston Guatemala City Chicago Atlanta Havana Toronto Lima Washington DC

Time Zone

Frankfurt Oslo Rome

Copenhagen Berlin Stockholm Budapest Warsaw

Cape Town

Athens

Time Zone

Kingston

–7

Philadelphia Bogota New York Boston

–6

Caracas –4.5 Santiago La Paz San Juan Halifax

–5

St.John’s –3.5 Buenos Aires Montevideo

City Name

Time Zone

Helsinki Istanbul Kyiv Cairo

Jerusalem Moscow*

Jeddah Tehran +3.5

+2Soﬁ a

Dubai +4 Kabul +4.5

Time Zone

Rio de Janeiro –3 Fernando de

Noronha

–5

Praia –1

–4

–3

City Name

Time Zone

+3Addis Ababa

Time Zone

–2

City Name

Karachi +5 Delhi +5.5 Kathmandu +5.75 Novosibirsk* Dhaka Yangon +6.5 Bangkok

Jakarta Kuala Lumpur Singapore Hong Kong Perth

Note

x The above list shows the city names of this watch. x If you will use the watch in a city that is not included in the City Name List, select a

city name that is in the same time zone as your city.

x Time zones in the above list are in accordance with Coordinated Universal Time

(UTC).

* In June 2012, the time offsets of the cities listed below were changed by +1 hour.

Note that this watch does not reﬂ these cities. When using this watch in the cities below, always leave the summer time setting ON in order to advance the time by one hour. Moscow Novosibirsk Vladivostok

Time Zone

Beijing Manila Shanghai Taipei

Seoul Tokyo Adelaide +9.5

+7Hanoi

Vladivostok*

Sydney Noumea +11

Wellington Suva

City Name

ect this change and it uses the former offsets of

Time Zone

Chatham Islands +12.75 Nukualofa +13

Kiritimati +14 Pago Pago –11 Honolulu –10

Anchorage –9 Vancouver San Francisco

+10Guam

Seattle Los Angeles Tijuana Edmonton

+12

Phoenix

City Name

Time Zone

–8

–7

L-3

L-5L-4