Casio 2318, 2319 Owner's Manual

Module No. 2318/2319

BB

• Press

B to change from mode to mode.

BB

Calendar Mode Timekeeping Mode Alarm Mode Dual Time Mode

Crown Crown

ABOUT THE BACKLIGHT (Module 2319 only)

GENERAL GUIDE

• Hold down

• The backlight of this watch employs an electro-luminescent (EL) light, which loses

• Frequent use of the backlight shortens the battery life.

• The watch emits an audible sound whenever the display is illuminated. This does

• The illumination provided by the backlight may be hard to see when viewed under

• The backlight automatically turns off whenever an alarm sounds.

LL

L to illuminate the display for about 2 seconds. The backlight is dis-

LL

abled while an input screen (with a flashing setting) is on the display.
its illuminating power after very long term use.

not indicate malfunction of the watch.
direct sunlight.

CALENDAR MODE

• This is the normal mode for this watch.

To set the date

Second hand

1.Hold down

2.Press

3. Press

4.Press

5.Press

6.Press

7. Press

• If you do not operate any button for a few minutes while a selection is flashing, the

• The date can be set with the range of January 1,1995 to December 31, 2039.

• The day of the week changes automatically in accordance with the date.

AA

A until the ADJ indicator starts to flash, followed by flashing of the year

AA

digits.

BB

B to increase the year digits. Holding down

BB

speed.

AA

A to move the selection to month digits.

AA
BB

B to increase the month digits. Holding down

BB

speed.

AA

A to move the selection to the day digits.

AA
BB

B to increase the day digits. Holding down

BB

speed.

AA

A to complete the procedure.

AA

flashing stops and the watch goes back to the Calendar Mode automatically.

Day

Minute handHour hand

Crown

Day of week

Year DayMonth

BB

B changes the digits at high

BB

BB

B changes the digits at high

BB

BB

B changes the digits at high

BB

To set the hands

1.When the second hand is at 12 o'clock position, stop it by pulling the crown out.

2.Set the hands by turning the crown.

3.Press the crown in on a time signal.

ALARM MODE

A

LN

When the Daily Alarm is turned on, an alarm sounds for 20 seconds at the preset
time each day.

To set the Alarm Time

1.Hold down

• The alarm turns on at this time.

2.Press

3. Press

4.Press

5.Press

• If you do not operate any button for a few minutes while a selection is flashing, the

To stop the alarm

• Press any button to stop the alarm after it starts to sound.

To turn the Daily Alarm on and off

Press

To test the alarm

Hold down

AA

A until the ADJ indicator starts to flash, followed by flashing of the hour

AA

digits of the alarm.

BB

B to increase the hour digits. Holding down

BB

speed.

AA

A to move the selection to the minutes digits.

AA
BB

B to increase the minutes digits. Holding down

BB

speed.

AA

A to complete the procedure.

AA

flashing stops and the watch goes back to the Alarm Mode automatically.

AA

A while in the Alarm Mode to turn the Daily Alarm on and off.

AA

BB

B to sound the alarm.

BB

MinutesHour

Press

AA

A.

AA

Hour Minutes

BB

B changes the digits at high

BB

BB

B changes the digits at high

BB

• Use this mode to set the current time. An incorrect time setting will result in incor-

TIMEKEEPING MODE

rect operation of the calendar.

Crown

Seconds

AA

A.

AA

12/24

• Press
and Seconds.

MinutesHour

Press

Seconds

To set the time

1. Hold down
seconds digits.

2.Press
the range of 30 to 59, the seconds are reset to 00 and 1 is added to the minutes. If
the seconds count is in the range of 00 to 29, the minutes count is unchanged.

3.Press

4.Press
high speed.

5.Press

6.Press
digits at high speed.

7.Press

8.Press

9.Press

• If you do not operate any button for a few minutes while a selection is flashing, the

flashing stops and the watch goes back to the Timekeeping Mode automatically.

AA

A until the ADJ indicator starts to flash, followed by flashing of the

AA

BB

B to reset the seconds to 00. If you press

BB

AA

A to move the selection to the hour digits.

AA
BB

B to increase the hour digits. Holding down

BB

AA

A to move the selection to the minutes digits.

AA
BB

B to increase the minutes digits. Holding down

BB

AA

A to move the selection to 12/24.

AA
BB

B to toggle the timekeeping format between 12-hour and 24-hour.

BB
AA

A to complete the procedure.

AA

Hour

Minutes

AA

A to switch the display between Hour/Minutes

AA

BB

B while the seconds count is in

BB

BB

B changes the hour digits at

BB

BB

B changes the minutes

BB

DUAL TIME MODE

0

MinutesHour

To set the Dual Time

1.Hold down

2.Press

3. Press

4.Press

5.Press

• In the Dual Time Mode, the seconds count is not displayed. But it is synchronized

• If you do not operate any button for a few minutes while a selection is flashing, the

• The format(12-hour and 24-hour) of the Dual Time Mode matches the format you

AA

A until the ADJ indicator starts to flash, followed by flashing of the hour

AA

digits.

BB

B to increase the hour digits. Holding down

BB

speed.

AA

A to move the selection to the minutes digits.

AA
BB

B to increase the minutes digits. Holding down

BB

speed.

AA

A to complete the procedure.

AA

with the seconds count of the Timekeeping Mode.
flashing stops and the watch goes back to the Dual Time Mode automatically.
select for normal timekeeping.

Hour Minutes

BB

B changes the digits at high

BB

BB

B changes the digits at high

BB