Casio 2313-1 User Manual

Module No. 2313

2313-1

GENERAL GUIDE

• Press

B to change from mode to mode.

• Some models have a white-on-black display.

• The watch automatically reverts to the Timekeeping Mode if you do not perform any operation in the Data Bank Mode for a few minutes.

• Holding down

When you return to the Timekeeping Mode or World Time Mode, the display contents (timekeeping or calendar) are the same as what they were when you last exited the mode.

The Home Time indicator appears on the display in the Timekeeping Mode.

Home time indicator

PM indicator

• Press date (day of the week, month, day).

• Your Home Time city code momentarily appears on the display whenever you enter the Timekeeping Mode from another mode.

• Pressing time for about one second.

To set the time and date

1. While in the Timekeeping Mode, hold down

display.

2. Press

quence.

City Code DST ON/OFF Seconds

3. While the seconds setting is selected (flashing), press

press to 00 and 1 is added to the minutes. If the seconds setting is in the range of 00 to 29, the minutes count is unchanged.

• While the 12H/24H setting is flashing, press hour timekeeping.

• While the DST ON/OFF setting is flashing, press (summer time) on and off.

• While the city code is flashing, press select one as your Home Time city.

• While any other setting is selected (flashing), press

• Holding down

4.After you set the time and date, press

• The day of the week is automatically set in accordance with the date.

• The date can be set within the range of January 1, 1995 to December 31, 2039.

• If you do not press any button for a few minutes while a setting is flashing, the

flashing stops and the watch goes back to the Timekeeping Mode automatically.

To set the hands

Pull the crown out. Set the hands by turning the crown in either direction. Push the crown in on a time signal.

The World Time Mode lets you view the current time in any one of 27 time zones (40 cities) around the world.

• You cannot change the time setting in the World Time Mode. The time setting you make in the Timekeeping Mode is used to calculate the times in the World Time zones. For daylight saving time (summer time), you must make separate settings for the Timekeeping Mode and World Time Mode.

• The seconds count in the World Time Mode is synchronized with the count in the Timekeeping Mode.

B for a few seconds in any mode returns to the Timekeeping Mode.

Timekeeping Mode

Press

World Time Mode

TIMEKEEPING MODE

Crown

Hour

12/24-hour format

Day of week

Month - Day

Minutes

Analog display

Press

Seconds

Digital display

Timekeeping Calendar

A to toggle the lower display between the time (hour, minutes, seconds) and

C in the Timekeeping Mode displays your Home Time city code and home

B to move the selection (flashing) around the display in the following se-

Day

C while the seconds setting is in the range of 30 to 59, the seconds are reset

C changes the setting at high speed.

Hour : Minutes

A until the city code flashes on the

YearMonth

C to reset it to 00. If you

C to toggle between 12-hour and 24-

C to toggle daylight saving time

C to scroll through the available city codes to

C to increase it.

A to return to the Timekeeping Mode.

WORLD TIME MODE

Day of weekWorld time indicatorDST on indicator

Press

Month - Day

Event Reminder Mode

Data Bank Mode

• The 12-hour/24-hour format setting you make in the Timekeeping Mode is applied to all the times in the World Time Mode.

• See the CITY CODE TABLE for information about city names and GMT differentials.

City Code Search

In the World Time Mode, press

down

C scrolls at high speed.

• Pressing

A in the World Time Mode displays the current date (day of the week,

month, day) in the currently displayed city code city. The world time indicator also appears while the date is displayed. Pressing time display.

Selecting Daylight Saving Time (Summer Time)

In the World Time Mode, hold down saving time (summer time) and standard time. The DST indicator is on the display while daylight saving time is turned on.

• The DST setting you make is applied to all World Time Mode cities. You cannot make separate settings for each city code.

• Note that the display also switches between the current time and current date display when you hold down ing your setting, press

C to scroll through the available city codes. Holding

A again returns to the city code and

A for a few seconds to toggle between daylight

A to change the daylight saving time setting. After mak-

A again to display the information (time or date) you want.

EVENT REMINDER MODE

The Event Reminder Mode lets you store up to 10 reminders of past events, each containing the date (year, month, day) and time (hour, minutes) the event occurred, and city code that was selected when the event occurred. You can use this feature to record the date, time, and location (city code) of events as they happen, such as the start and end of a meeting, how long it takes to drive from one location to another, etc.

Data No.

Year

Alternates at 1-second intervals.

Month - Day

• The 12-hour/24-hour time format for the Event Reminder Mode is the same as the one you select in the Timekeeping Mode.

Recording an Event Reminder

In the Timekeeping Mode, hold down

• The first event you record is stored as Record 1. When you record a second event, it is stored as Record 1 and the previous event shifts to Record 2. Records are shifted each time you input a new one. This means that the newest event is always Record 1. If you have 10 records stored in memory, the oldest one is Record E (END).

• You can have up to 10 event records in memory at one time. Recording an eleventh record causes the oldest record in memory (Record E) to be deleted and the other remaining records to be shifted to make room for the new one.

Viewing Records in Event Reminder Memory

In the Event Reminder Mode, press newest one (Record 1).

• Holding down

• The date of the record, alternates with its city code and time on the display in one-

second intervals.

Deleting an Event Reminder Record

1.Use

2.Hold down

• Releasing ing anything.

• The remaining records are shifted accordingly and Record 1 appears after the record is deleted.

C scrolls through records at high speed.

C to display the record you want to delete.

A for a few seconds until CLR stops flashing on the display.

A while CLR is still flashing cancels the delete procedure without delet-

C for a few seconds until the display flashes.

C to scroll through records, starting with the

Stopwatch Mode

City code

Hour : Minutes

2313-2

DATA BANK MODE

Data

The Data Bank Mode lets you store up to 10 records (data No.: 1~E), each containing a text of up to 24 characters. The watch automatically reverts to the Timekeeping Mode if you leave it in the Data Bank Mode without performing any operation for a few minutes.

• When you enter the Data Bank Mode, the first record that appears is the one that was on the display the last

Data No.

Inputting Data

1.Use

C to scroll to an empty record or to an existing record whose data you want to

replace.

2.Hold down

3.Press

• The following shows the scroll cycle when

• Note that there is no way to back scroll. This means that if you accidentally go past

the character you want, you have to go through the entire forward scroll cycle to get back to it.

4. When the character you want is displayed, press

• Repeat steps 3 and 4 as many times as necessary to input all of the text.

5.After inputting the text you want, press

• The watch automatically cancels the input operation and returns to the Data Bank Mode screen if you do not input anything for a few minutes.

Searching for Data Bank Mode Data

In the Data Bank Mode, press high speed.

• When the data text has more than three characters, the text scrolls from right to left on the screen. The end of the text data is indicated by the symbol

• Pressing again to resume scrolling.

Editing Data

1.In the Data Bank Mode, use

2.Hold down

3.Use

4.Use

• Repeat steps 3 and 4 to make the rest of the corrections you want.

5.After everything is the way you want, press

Deleting Data Bank Mode Data

1.In the Data Bank Mode, use

2.Hold down

3.Hold down

• At this point you could input new data if you want.

4.Press

A for a few seconds until the first data character starts to flash.

C to scroll through characters at the flashing location. Holding down

scrolls at high speed.

(Space) A to Z 0 to 9

tion.

A pauses the right-to-left scrolling of the Data Bank Mode data. Press

A for a few seconds until the first data character starts to flash.

B to move the flashing to a character you want to change.

BB CC

C to scroll through available characters until the one you want is displayed.

A for a few seconds until the first data character starts to flash.

AA BB

B and

that the data is deleted.

A to return to Data Bank Mode screen.

1/100 second

time you exited the mode.

C is pressed.

B to advance to the next posi-

A to store it.

C to scroll through data. Holding down

C to display the record whose data you want to edit.

A to store the new data.

C to display the record whose data you want to delete.

C at the same time until CLR appears on the screen, indicating

C scrolls at

STOPWATCH MODE

The Stopwatch Mode lets you measure elapsed time, split times, and two finishes. The range of the stopwatch is 59 minutes, 59.99 seconds.

CITY CODE TABLE

GMT City

differential Code

–11 PPG PAGO PAGO –10 HNL HONOLULU PAPEETE –09 ANC ANCHORAGE NOME

YVR VANCOUVER LAS VEGAS, SEATTLE, DAWSON CITY

–08 SFO

LAX LOS ANGELES

–07 DEN DENVER EL PASO, EDMONTON

MEX MEXICO CITY HOUSTON, DALLAS/FORT WORTH,

–06

Based on data as of June 1999.

CHI CHICAGO NEW ORLEANS, WINNIPEG MIA MIAMI MONTREAL, DETROIT, BOSTON, LIMA,

–05

NYC NEW YORK PANAMA CITY, HAVANA, BOGOTA

–04 CCS CARACAS LA PAZ, SANTIAGO, PORT OF SPAIN –03 RIO

+00 LON LONDON

PAR PARIS MADRID, AMSTERDAM, ALGIERS,

MIL MILAN HAMBURG, FRANKFURT, VIENNA,

+01

ROM ROME STOCKHOLM

BER BERLIN

IST ISTANBUL ATHENS, HELSINKI, BEIRUT,

+02 CAI CAIRO DAMASCUS, CAPE TOWN

JRS JERUSALEM

+03 JED JEDDAH

+3.5 THR TEHRAN SHIRAZ

+04 DXB DUBAI ABU DHABI, MUSCAT

+4.5 KBL KABUL

KHI KARACHI

+05

MLE MALE

+5.5 DEL DELHI MUMBAI, CALCUTTA

+06 DAC DHAKA COLOMBO

+6.5 RGN YANGON

+07 BKK BANGKOK

SIN SINGAPORE KUALA LUMPUR, BEIJING, TAIPEI,

+08

HKG HONG KONG MANILA, PERTH, ULAANBAATAR

SEL SEOUL PYONGYANG

+09

TYO TOKYO

+9.5 ADL ADELAIDE DARWIN

GUM GUAM MELBOURNE, RABAUL

+10

SYD SYDNEY +11 NOU NOUMEA PORT VILA +12 WLG WELLINGTON CHRISTCHURCH, NADI, NAURU ISLAND

City Other major cities in same time zone

SAN FRANCISCO

RIO DE JANEIRO

SAO PAULO, BUENOS AIRES, BRASILIA, MONTEVIDEO DUBLIN, LISBON, CASABLANCA, DAKAR, ABIDJAN

MOSCOW, KUWAIT, RIYADH, ADEN, ADDIS ABABA, NAIROBI

JAKARTA, PHNOM PENH, HANOI, VIENTIANE

Minutes

Seconds

Elapsed time measurement

Start

Split time measurement

Start

Split time and 1st-2nd place times

Start

Stop Re-start Stop Clear

Split Split release Stop Clear

Split Stop Split release Clear

First runner finishes.

Second runner finishes. Record time of first runner.

Record time of second runner.