Casio 2311 Owner's Manual

Module No. 2311

Crown (Normal position)

First click (Setting date)

Second click (Setting time)

To Set Time

Pull the crown out to the second click when the second hand is at 12 o’clock position and the second hand stops. Set the hands by turning the crown in either direction. Push the crown in on a time signal.

To Set Date

Pull the crown out to the first click. Set the date by turning the crown. Push the crown in to the normal position.

• Avoid setting the date between 8:00 pm and 1:00 am.

Elapsed time bezel	For watch with the elapsed time bezel	mark with
	Rotate the elapsed time bezel to align the
	the minute hand.

After certain amount of time elapsed, read the graduation on the elapsed time bezel which the minute hand points to. The elapsed time is indicated.

•Some water resistant models are equipped with a screw lock crown.

• With such models, you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out. Do not pull too forcibly on such crowns.

• Also note that such watches are not water resistant while their crowns are loosened. Be sure to screw the crowns back in as far as they will go after making any setting.