Casio 2263 User Manual

Module No. 2263

2263-1

• If the contents of the display seem to be continually changing, see “AUTO DISPLAY FUNCTION” for information on how to stop it.

GENERAL GUIDE

• Press

C to change from mode to mode.

• In any mode, press

Caution

• The backlight of this watch employs an electro-luminescent (EL) light, which loses its illuminating power after very long term use.

• Frequent use of the backligfht shortens the battery life.

• The watch emits an audible sound whenever the display is illuminated. This is because the EL light vibrates slightly when lit. It does not indicate malfunction of the watch.

This watch lets you select any two of 40 cities (TIME 1, TIME 2) as basic Timekeeping Mode times. Hold down

• You can display either the city code or year. Press of the city code and year.

Month-Day

TIME 1

TIME 2

To set the time and date

Setting the time and date for either of the basic times (TIME 1 or TIME 2) automatically adjusts the settings of the other basic time.

• You can turn daylight saving time (DST) on and off independently for TIME 1 and TIME 2.

1. While in the Timekeeping Mode, hold down

display.

2.Press

C to change the selection (flashing) in the following sequence.

City Code DST

3.While the seconds setting is selected (flashing), press

press

D while the seconds setting is in the range of 30 to 59, the seconds are

reset to 00 and 1 is added to the minutes. If the seconds setting is in the range of 00 to 29, the minutes count is unchanged.

• While City Code setting is selected (flashing), press City Code. (For full information on City Code, see the CITY CODE TABLE.)

• While the DST setting is selected, press

• While the 12/24-hour format setting is selected, press

and 24.

• While any other setting is selected (flashing), press decrease it.

• Holding down either button changes the setting at high speed.

4.After you set the time and date, press

• The day of the week is automatically set in accordance with the date.

• The date can be set within the range of January 1, 1995 to December 31, 2039.

• If you do not operate any button for a few minutes while a setting is flashing, the

flashing stops and the watch goes back to the Timekeeping Mode automatically.

Caution

The following causes all data stored in memory to be deleted. Be sure to always keep separate written copies of all important data.

• Malfunction or repairs

• Dead battery

• Battery replacement In no event will CASIO be liable for loss of data or any damages arising out of such loss.

Mode indicator

L to illuminate the display for about two seconds.

Timekeeping Mode File Mode Alarm Mode Stopwatch Mode

TIMEKEEPING MODE

D to toggle the Timekeeping Mode between TIME 1 and TIME 2.

Day of weekCity code Year

Press

Hold down

D. Hold down

Press

Seconds

Day Month Year

A to return to the Timekeeping Mode.

A to toggle between display

A until the City Code flashes on the

Hour Minutes

12/24-Hour

Format

D to reset it to 00. If you

D or

B to scroll through the

D to toggle it ON and OFF.

D to toggle it between 12

D to increase it or

FILE MODE

The File Mode lets you store up to 30 pairs of name and telephone number data. The name can be up to 8 characters long and the number up to 12 digits. Data is automatically sorted into alphabetical order based on the name data. You can recall data by scrolling through it on the display.

• If you do not operate any button for a few

Number

minutes while in the File Mode, the watch

area

automatically goes back to the Timekeeping Mode.

DST on indicator

B to

To input File data

Remaining

[New data display]

Press

4.After you select the character you want, press right.

• Repeat steps 3 and 4 until you complete name input.

• You can input up to 8 characters in the name area.

5.After the name input is through, use

6.While the cursor is in the number area, use The character changes in the following sequence. Holding down either button changes the character at high speed.

Press Press

7.After you select the character you want, press right.

• Repeat steps 6 and 7 until you complete number input.

8.After inputting the data you want, press

• The message “SORT” appears on the display for a few seconds.

• The name area shows only 5 characters, but automatically scrolls from right to left

to show all of the characters that make up the text.

To scroll through File data

In the normal File Mode (when the display is not flashing), press forward or

• The data item that is displayed when you exit the File Mode will be the first data

to appear when you enter the File Mode again.

To edit File data

1.In the File Mode, use one you want to edit.

2.Hold down

3.Use

C to move the cursor to the character you want to change.

CC BB

4.Use

B or

• For details, see “To input File data” (steps 3 through 4 for name input, or 6

through 7 for number).

5.After editing the data, press

To delete File data

1.In the File Mode, use one you want to delete.

2.Hold down

3.Press

B and

• The message “CLR” (clear) appears on the display for a few seconds.

• At this time the cursor appears on the display ready for input.

4.Input data or press

memory

(Space)

B to scroll backward through stored data.

A until the flashing cursor appears on the display.

D to select the character you want.

A until the flashing cursor appears on the display.

D at the same time to delete the data item.

A to return to the File Mode.

1.In the File Mode, press data display appears.

•

If the message “FULL” appears on the display, it means that memory is full. To store more data, you will first have to delete some of the data.

2.Hold down

3.Use

A to Z

– (Hyphen)

B and

D to scroll through the data items and display the

A to store it.

B and

D to scroll through the data items and display the

A until the flashing cursor appears

on the name area.

B or

D to input a character at the cursor

position. The character changes in the following sequence. Holding down either button changes the character at high speed.

0 to 9

C to move the cursor to the number area.

B or

0 to 9

A to store it into memory.

B or

D until the new

–

••

C to advance the cursor to the

D to input a number you want.

(Space)

C to advance the cursor to the

D to scroll

•

Name area

2263-2

Mode indicator

indicator

Hour

3.Press either button changes the selection at high speed.

• The format (12-hour and 24-hour) of the alarm time matches the format you

select for normal timekeeping.

• When setting the alarm time using the 12-hour format, take care to set the time

correctly as morning (no indicator) or afternoon (P).

4.After you set the alarm time, press

• If you do not operate any button for a few minutes while a selection is flashing,

the flashing stops and the watch goes back to the Alarm Mode automatically.

To switch the daily alarm and hourly time signal on and off

Press hourly time signal in the following sequence.

To test the alarm

Hold down

Alarm on indicator

Minutes

Current time

D to increase the selected digits and

D while in the Alarm Mode to change the status of the daily alarm and

Alarm on indicator

D while in the Alarm Mode to sound the alarm.

When the Daily Alarm is turned on, the alarm sounds for 20 seconds at the preset time each day. Press any button to stop the alarm after it starts to

Hourly time

sound. When the Hourly Time Signal is turned on,

signal on

the watch beeps every hour on the hour.

indicator

•

The alarm sounds when the time selected for basic timekeeping in the Timekeeping Mode (TIME 1 or

TIME 2) matches the alarm time you set.

To set the alarm time

1.Hold down

2.Press

Both OFFBoth ON

A while in the Alarm Mode. The hour

digits flash on the display because they are selected.

At this time the Daily Alarm is turned on

automatically.

C to change the selection in the following

sequence.

Hour

B to decrease them. Holding down

A to return to the Alarm Mode.

Hourly time signal on indicator

Daily Alarm Only

Minutes

Hourly Time Signal Only

STOPWATCH MODE

ALARM MODE

Mode indicator

Current time

The Stopwatch Mode lets you measure elapsed time, split times, and two finishes. The range of the stopwatch is 59 minutes, 59.99 seconds.

CITY CODE TABLE

City Code City GMT differential

ADL ADELAIDE +9.5 ANC ANCHORAGE –09 BER BERLIN +01

BKK BANGKOK +07

CAI CAIRO +02

CCS CARACAS –04

CHI CHICAGO –06 DAC DHAKA +06

DEL DELHI +5.5 DEN DENVER –07 DXB DUBAI +04 GUM GUAM +10 HKG HONG KONG +08

HNL HONOLULU –10

IST ISTANBUL +02 JED JEDDAH +03 JRS JERUSALEM +02 KBL KABUL +4.5

KHI KARACHI +05 LAX LOS ANGELES –08

LON LONDON +00 MEX MEXICO CITY –06

MIA MIAMI –05

MIL MILAN +01

MLE MALE +05 NOU NOUMEA +11 NYC NEW YORK –05 PAR PARIS +01 PPG PAGO PAGO –11 RGN YANGON +6.5

RIO

ROM ROME +01

SEL SEOUL +09

SFO

SIN SINGAPORE +08

SYD SYDNEY +10 THR TEHRAN +3.5 TYO TOKYO +09 WLG WELLINGTON +12 YVR VANCOUVER –08

Based on data as of December 1997

RIO DE JANEIRO

SAN FRANCISCO

–03

–08

Seconds

Minutes

(a) Elapsed time measurement

Start Stop Re-start Stop Clear

(b) Split time measurement

Start Split Split release Stop Clear

Start Split Stop Split release Clear

➤

First runner finishes.

1/100 seconds

➤

Second runner finishes. Record time of first runner.

➤

Record time of second runner.

➤

AUTO DISPLAY FUNCTION

The Auto Display function of this watch continually changes the contents of the display. Note that you cannot use any of the watch’s other functions while the Auto Display function is operating.

To turn the Auto Display on

Hold down

C for about two or three seconds in any mode until the watch beeps.

To turn the Auto Display off

Hold down

C for about two or three seconds until the watch beeps. At this time the

watch is in the Timekeeping Mode.

Note

The Auto Display function cannot be performed while you are making settings (i.e. while digits or other setting are flashing on the display).