Casio 2163-1, 2163-2 User Manual

Module No. 2163
A to Z
0 to 9
(Space)
••
/
Press . Press .
2163-1
If the contents of the display seem to be continually changing, see “AUTO DISPLAY FUNCTION” for information on how to stop it.
GENERAL GUIDE
CC
Press
C to change from mode to mode.
CC
In any mode, press * If you hold down
Caution
The backlight of this watch employs an electro-luminescent (EL) light, which loses its illuminating power after very long term use.
Frequent use of the backlight shortens the battery life.
The watch emits an audible sound whenever the display is illuminated. This is because the EL light vibrates slightly when lit. It does not indicate malfunction of the watch.
This watch lets you select any two of 40 cities (TIME 1, TIME 2) as basic Timekeep­ing Mode times. Hold down TIME 2.
You can display either the city code or year. Press the city code and year.
City code Year
Month-Day
TIME 1
TIME 2
To set the time and date
Setting the time and date for either of the basic times (TIME 1 or TIME 2) automati­cally adjusts the settings of the other basic time.
You can turn daylight saving time (DST) on and off independently for TIME 1 and TIME 2.
1. While in the Timekeeping Mode, hold down
display.
CC
2. Press
C to change the selection (flashing) in the following sequence.
CC
3. While the seconds setting is selected (flashing), press
DD
press
D while the seconds setting is in the range of 30 to 59, the seconds are reset
DD
to 00 and 1 is added to the minutes. If the seconds setting is in the range of 00 to 29, the minutes count is unchanged.
While City Code setting is selected (flashing), press City Code. (For full information on City Code, see the CITY CODE TABLE.)
While the DST setting is selected, press
While the 12/24-hour format setting is selected, press
and 24.
While any other setting is selected (flashing), press crease it.
Holding down either button changes the setting at high speed.
4.After you set the time and date, press
The day of the week is automatically set in accordance with the date.
The date can be set within the range of January 1, 1995 to December 31, 2039.
If you do not operate any button for a few minutes while a setting is flashing, the
flashing stops and the watch goes back to the Timekeeping Mode automatically.
Caution
The following causes all data stored in memory to be deleted. Be sure to always keep separate written copies of all important data.
Malfunction or repairs
Dead battery
Battery replacement
In no event will CASIO be liable for loss of data or any damages arising out of such loss.
Mode indicator
Name area
LL
LL
LL
L, part of the segment indicator in the upper right corner of the display flashes.
LL
TIMEKEEPING MODE
to toggle the Timekeeping Mode between TIME 1 and
DD
D
DD
AA
A to toggle between display of
AA
Day of week
AA
Press
A.
AA
DD
Hold down
D.
DD
AA
Press
A.
AA
AA
A until the City Code flashes on the
AA
SecondsDSTCity Code Hour Minutes
Day Month Year
DD
D to toggle it ON and OFF.
DD
AA
A to return to the Timekeeping Mode.
AA
DD
D to reset it to 00. If you
DD
DD
D or
DD
DD
D to toggle it between 12
DD
DD
D to increase it or
DD
DD
Hold down
D.
DD
DST on indicator
12/24-Hour
Format
BB
B to scroll through the
BB
BB
B to de-
BB
FILE MODE
The File Mode lets you store up to 30 pairs of name and telephone number data. The name can be up to 8 characters long and the num­ber up to 12 digits. Data is automatically sort­ed into alphabetical order based on the name data. You can recall data by scrolling through it on the display.
If you do not operate any button for a few
Number
minutes while in the File Mode, the watch
area
automatically goes back to the Timekeeping Mode.
Stopwatch ModeTimekeeping Mode File Mode Alarm Mode
To input File data
Remaining
New data display
4.After you select the character you want, press
Repeat steps 3 and 4 until you complete name input.
You can input up to 8 characters in the name area.
5.After the name input is through, use
6. While the cursor is in the number area, use The character changes in the following sequence. Holding down either button changes the character at high speed.
Press . Press .
7.After you select the character you want, press
Repeat steps 6 and 7 until you complete number input.
8.After inputting the data you want, press
The message SORT appears on the display for a few seconds.
The name area shows only 5 characters, but automatically scrolls from right to left
to show all of the characters that make up the text.
To scroll through File data
In the normal File Mode (when the display is not flashing), press
BB
or
B to scroll backward through stored data.
BB
The data item that is displayed when you exit the File Mode will be the first data to
appear when you enter the File Mode again.
To edit File data
1.In the File Mode, use you want to edit.
2.Hold down
CC
3.Use
C to move the cursor to the character you want to change.
CC BB
4.Use
B or
BB
For details, see “To input File data” (steps 3 through 4 for name input, or 6 through
7 for number).
5.After editing the data, press
To delete File data
1.In the File Mode, use you want to delete.
2.Hold down
BB
3.Press
B and
BB
The message CLR (clear) appears on the display for a few seconds.
At this time the cursor appears on the display ready for input.
4.Input data or press
memory
– (Hyphen)
AA
A until the flashing cursor appears on the display.
AA
DD
D to select the character you want.
DD
AA
A until the flashing cursor appears on the display.
AA
DD
D at the same time to delete the data item.
DD
AA
A to return to the File Mode.
AA
1. In the File Mode, press data display appears.
If the message “FULL” appears on the display, it
means that memory is full. To store more data, you will first have to delete some of the data.
2. Hold down
3.Use
BB
DD
B and
D to scroll through the data items and display the one
BB
DD
AA
A to store it.
AA
BB
DD
B and
D to scroll through the data items and display the one
BB
DD
AA
A until the flashing cursor appears
AA
on the name area.
BB
DD
B or
D to input a character at the cursor
BB
DD
position. The character changes in the following sequence. Holding down either button changes the character at high speed.
CC
C to advance the cursor to the right.
CC
CC
C to move the cursor to the number area.
CC
BB
B or
BB
0 to 9
CC
C to advance the cursor to the right.
CC
AA
A to store it into memory.
AA
BB
DD
B or
D until the new
BB
DD
DD
D to input a number you want.
DD
(Space)
DD
D to scroll forward
DD
ALARM MODE
Mode indicator
PM indicator Minutes
Hour
Alarm on indicator
Hourly time signal on indicator
Current time
When the Daily Alarm is turned on, the alarm sounds for 20 seconds at the preset time each day. Press any button to stop the alarm after it starts to sound. When the Hourly Time Signal is turned on, the watch beeps every hour on the hour.
The alarm sounds when the time selected for
basic timekeeping in the Timekeeping Mode (TIME 1 or TIME 2) matches the alarm time you set.
To set the alarm time
1.Hold down
2.Press
AA
A while in the Alarm Mode. The hour
AA
digits flash on the display because they are se­lected. At this time the Daily Alarm is turned on automatically.
CC
C to change the selection in the following
CC
sequence.
Hour
Minutes
2163-2
DD
3.Press
D to increase the selected digits and
DD
either button changes the selection at high speed.
The format (12-hour and 24-hour) of the alarm time matches the format you select for normal timekeeping.
When setting the alarm time using the 12-hour format, take care to set the time correctly as morning (no indicator) or afternoon (P).
4.After you set the alarm time, press
If you do not operate any button for a few minutes while a selection is flashing, the flashing stops and the watch goes back to the Alarm Mode automatically.
To switch the daily alarm and hourly time signal on and off
DD
Press
D while in the Alarm Mode to change the status of the daily alarm and hourly
DD
time signal in the following sequence.
To test the alarm
Hold down
Alarm on indicator Hourly time signal on indicator
Both ON Hourly Time
DD
D while in the Alarm Mode to sound the alarm.
DD
Both OFF
BB
B to decrease them. Holding down
BB
AA
A to return to the Alarm Mode.
AA
Daily Alarm only
Signal only
STOPWATCH MODE
Mode indicator
Current time
Minutes
Seconds
(a) Elapsed time measurement
DD
D
DD
Start Stop Re-start Stop Clear
(b) Split time measurement
DD
D
DD
Start Split Split release Stop Clear
(c) Split time and 1st-2nd place times
DD
D
DD
Start Split Stop Split release Clear
DD
D
DD
AA
A
AA
AA
A
AA
First runner finishes.
The Stopwatch Mode lets you measure elapsed time, split times, and two finishes. The range of the stopwatch is 59 minutes, 59.99 seconds.
1/100 seconds
DD
D
DD
AA
A
AA
DD
D
DD
Second runner finishes. Release time of first runner.
DD
D
DD
DD
D
DD
AA
A
AA
Record time of second runner.
AA
A
AA
AA
A
AA
AA
A
AA
CITY CODE TABLE
City
Code differential
ADL ADELAIDE +9.5 ANC ANCHORAGE –09 BER BERLIN +01 BKK BANGKOK +07
CAI CAIRO +02 CCS CARACAS –04 CHI CHICAGO –06 DAC DHAKA +06 DEL DELHI +5.5 DEN DENVER –07 DXB DUBAI +04
GUM GUAM +10 HKG HONG KONG +08
HNL HONOLULU –10
IST ISTANBUL +02 JED JEDDAH +03 JRS JERUSALEM +02 KBL KABUL +4.5
KHI KARACHI +05 LAX LOS ANGELES –08 LON LONDON +00
MEX MEXICO CITY –06
MIA MIAMI –05
MIL MILAN +01 MLE MALE +05
NOU NOUMEA +11 NYC NEW YORK –05
PAR PARIS +01
PPG PAGO PAGO –11 RGN YANGON +6.5
RIO RIO DE JANEIRO –03
ROM ROME +01
SEL SEOUL +09 SFO SAN FRANCISCO –08
SIN SINGAPORE +08 SYD SYDNEY +10 THR TEHRAN +3.5 TYO TOKYO +09
WLG WELLINGTON +12
YVR VANCOUVER –08
*Based on data as of December 1997.
City
GMT
The Auto Display function of this watch continually changes the contents of the dis-
AUTO DISPLAY FUNCTION
play. Note that you cannot use any of the watch’s other functions while the Auto Display function is operating.
To turn the Auto Display on
CC
Hold down
C for about two or three seconds in any mode until the watch beeps.
CC
To turn the Auto Display off
CC
Hold down
C for about two or three seconds until the watch beeps. At this time the
CC
watch is in the Timekeeping Mode.
Note
The Auto Display function cannot be performed while you are making settings (i.e. while digits or other setting are flashing on the display).
Loading...