Casio 2153 Owner's Manual

Module No. 2153

2153-1

• Press

A to change from mode to mode.

• In any mode (except when making settings) press

Animation Display

Timekeeping Mode

L to illuminate the display for about two seconds.

Time Display

TIMEKEEPING MODE

GENERAL GUIDE

Day of week

PM indicator

Hour

• Hold down

• Press

C to switch the display between animation display and time display.

To set the time and date

1.While in the Timekeeping Mode, hold down display.

2.Press

A to move the flashing around the display in the following sequence.

3. While the seconds setting is selected (flashing), press

press

C while the seconds setting is in the range of 30 to 59, the seconds are reset

to 00 and 1 is added to the minutes. If the seconds setting is in the range of 00 to 29, the minutes count is unchanged.

• While any other setting (besides seconds) is selected (flashing), press

crease it. Holding down

4.After you set the time and date, press

• The day of the week is automatically set in accordance with the date.

• The date can be set within the range of January 1, 1995 to December 31, 2039.

• If you do not press any button for a few minutes while a setting is flashing, the

flashing stops and the watch goes back to the Timekeeping Mode automatically.

Month - Day

Press

Minutes

Animation

C to switch the display between 12-hour and 24-hour format.

Seconds

Day

C changes the setting at high speed.

Hour Minutes

B to return to the Timekeeping Mode.

Hour Seconds

Minutes

B until the seconds digits flash on the

YearMonth

C to reset it to 00. If you

C to in-

SYNCHRO ANIMATION

• While an animated figure is on the Timekeeping Mode screen, angling the watch

towards your face causes the icon to move.

Day Counter Mode

Alternate at 2-second intervals

Alarm Mode

Animation Roulette

Game Mode

DAY COUNTER MODE

The Day Counter Mode lets you count the number of days from the Timekeeping Mode’s current date to a specific target date.

Target date (Year Month - Day)

Alternate at 2-second intervals

• There are 5 Day Counter records, each of which can be set with its own icon and target date.

• When a target date is reached, the DAYS indicator flashes on the display in the Timekeeping Mode. The DAYS indicator also flashes in the Day Counter Mode when the screen for the target date is on the display.

• The DAYS indicator flashes on the target date each year, regardless of the year setting of the target date.

Recalling Day Counter Data

In the Day Counter Mode, press

• The Day Counter Mode shows the number of days from today to the target date, regardless of whether the target date is in the past or future.

Setting Day Counter Data

1.In the Day Counter Mode, press

2.Hold down

3.Press

4.Press

• Holding down

• Use

B until the year digits start to flash on the display.

A to change the selection in the following sequence.

Year Month Day Icon

C to increase the number or

changes the digits at high speed. the date you want. down either button changes the icon at high speed.

A sets today as the target date. You can then make any changes in

C and

L to cycle through the icons in the sequence shown below. Holding

DAYS

Number of days

Record number

C to scroll through the Day Counter record screens.

C to display a record number you no longer need.

L to decrease it. Holding down either button

Parallel to ground 40

• The witch icon periodically changes the animated figures in accordance with the number of times you angle the watch towards your face.

• The number of ● marks increases each time the broom riding witch appears.

• When the number of ● marks increases, a special animation appears on the screen.

• At 3 o’clock on the following day, all of the ● marks are cleared from the display and

the animated display restarts from the first broom riding witch.

ABOUT THE BACKLIGHT

• In any mode (except when making settings) press about two seconds.

• The backlight of this watch employs an electro-luminescent (EL) light, which loses its illuminating power after very long term use.

• Frequent use of the backlight shortens battery life.

• The watch emits an audible sound whenever the display is illuminated. This does

not indicate malfunction of the watch.

• The illumination provided by the backlight may be hard to see when viewed under direct sunlight.

L to illuminate the display for

5. After you set the target dates and icons, press Mode.

• The date can be set with the range of January 1, 1940 to December 31, 2039.

• If you do not operate any button for a few minutes while a selection is flashing, the

flashing stops and the watch goes back to the Day Counter Mode automatically.

B to return to the Day Counter

2153-2

Mode indicator

Hour

Alarm on indicator Hourly time signal on indicator

3. Press

C to increase the number. Holding down

high speed.

4.After you set the alarm time, press

• The format (12-hour and 24-hour) of the alarm time matches the format you select for normal timekeeping.

• When setting the alarm time using the 12-hour format, take care to set the time correctly as morning or afternoon.

• If you do not operate any button for a few minutes while a selection is flashing, the flashing stops and the watch goes back to the Alarm Mode automatically.

To stop the alarm

• Press any button to stop the alarm after it starts to sound.

To turn the Daily Alarm and Hourly Time Signal on and off

Press

C while in the Alarm Mode to change the status of the Daily Alarm and Hourly

Time Signal in the following sequence.

Both OFF Both ON

• The alarm and hourly time signal indicator is displayed in all modes.

To test the alarm

Hold down

C while in the Alarm Mode to sound the alarm.

When the Daily Alarm is turned on, the alarm sounds for 20 seconds at the preset time each day. Press any but-

Minutes

ton to stop the alarm after it starts to sound. When the Hourly Time Signal is turned on, the watch beeps every hour on the hour.

To set the alarm time

1. Hold down

2.Press

Daily Alarm only

B until the hour digits start to flash on the

display. The hour digits flash because they are

. At this time the Alarm is automatically turned on.

A to change the selection in the following se-

quence.

Hour Minutes

C changes the current number at

B to return to the Alarm Mode.

Hourly Time Signal only

select-

ALARM MODE

This is a fun game you can play alone or with your friends to see who can catch the

ANIMATION ROULETTE GAME MODE

witch.

How to play

• Enter the Animation Roulette Game Mode and icons start to scroll on the display of the watch.

• Moving the watch to a position that is parallel to the ground and then tilting it towards you approximately 40 degrees.

Parallel to ground 40

• When you tilt the watch to your face, it beeps, the “STOP” messages clears from the display, and the speed that the icons are scrolling gradually slow down until the scrolling stops. One of the seven different icons remains on the display.

• If any icon besides the witch is stopped on the display, it remains for a few seconds, after which the scrolling starts again. This repeats until the scrolling stops at the icon of the witch.

• When the scrolling stops with the witch icon on the display, the backlight flashes and the game ends. Pressing

C restarts the game.