Casio 1933, 2065, 2065-1 General Manual
1856/1933/2065-1
Module No.
1856/1933/2065
GENERAL GUIDE
• Press
CC
CC
C to change from mode to mode.
• In the Timekeeping Mode, press
DD
DD
D to illuminate the display for about 3 seconds. In the Stopwatch Mode, press
BB
BB
B to illuminate the display.
Timekeeping Mode Mix Mode Alarm Mode Stopwatch Mode
TIMEKEEPING MODE
• In the Timekeeping Mode, press
EE
EE
E to switch between
the 12-hour and 24-hour formats. When using the 12hour timekeeping format, the letters A and P are used
to indicate “am” and “pm” on the display. No indicator
appears on display for 24-hour format.
• Press
DD
DD
D in the Timekeeping Mode to activate the EL
backlight.
• Pressing
BB
BB
B in the Timekeeping Mode randomly selects
and plays one of the six melodies (three preset melodies, three user melodies) in watch memory. While a
melody is playing, dancers and musicians perform on
the display.
Pressing any button interrupts play of the melody.
• See the “MELODY LIST” at the back of this manual for
details on the three preset melodies.
To set the time and date
1. Hold down
AA
AA
A while in the Timekeeping Mode. The seconds digits flash on the
display because they are
selected
.
2.Press
CC
CC
C to change the selection in the following sequence.
Hour
Seconds
Minutes
Month
Day
Year
Contrast
3. While the seconds digits are selected (flashing), press
EE
EE
E or
BB
BB
B to reset the sec-
onds to 00. If you press
EE
EE
E or
BB
BB
B while the seconds count is in the range of 30 to 59,
the seconds are reset to 00 and 1 is added to the minutes. If the seconds count is
in the range of 00 to 29 , the minutes count is unchanged.
4. While any other digits (besides seconds) are selected (flashing), press
EE
EE
E to in-
crease the number or
BB
BB
B to decrease it. Holding down either button changes the
current selection at high speed.
• Use the contrast adjustment screen (indicated by “CNT”) to adjust display contrast
within a range of 1 to 7. Press
EE
EE
E to increase the contrast value (which makes
figures darker) or
BB
BB
B to decrease the value. In the case of contrast setting, holding
either button does not change the contrast setting at high speed.
5.After you set the time and date, press
AA
AA
A to return to the Timekeeping Mode.
• The day of week is automatically set in accordance with the date.
• The date can be set within the range of January 1, 1995 to December 31, 2039.
• If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the Timekeeping Mode automatically.
About the backlight
In the Timekeeping Mode, press
DD
DD
D to illuminate the display for about 3 seconds.
In Stopwatch Mode, press
BB
BB
B to illuminate the display for about 3 seconds.
• The backlight of the watch employs an electro-luminescent (EL) light, which loses
illuminating power after very long use.
• The illumination provided by the backlight may be hard to see when viewed under
direct sunlight.
• The watch will emit an audible sound whenever the display is illuminated. This is
caused by a transformer that vibrates when the EL panel lights up. It does not
indicate malfunction of the watch.
• The backlight automatically turns off whenever an alarm sounds.
MIX MODE
The Mix Mode lets you arrange your own melody and store it in watch memory. You
can select a rhythm, tempo, and phrase to create a melody. See “USING THE MIX
MODE” for details about how to create a melody.
To play a Mix Mode melody
1. Use the
EE
EE
E button to select one of the three available
melodies.
2. Press
DD
DD
D to play the currently selected melody. Press-
ing any button interrupts play of the melody.
• While a melody is playing, dancers and musicians perform on the display.
• If the melody number you select above does not have a
user memory assigned to it, a default rhythm pattern
plays instead.
• Pressing
BB
BB
B while a melody is selected (but not playing)
displays the melody evaluation screen for the melody.
See “USING THE MIX MODE” for details on evaluating
melodies.
• Holding down
BB
BB
B for about two seconds while a melody is selected (but not playing)
deletes the melody.
Day of week
Month – Day
PM indicator
Hour
Minutes
Seconds
ALARM MODE
You can set five independent alarms. Use the Alarm Mode
to turn the alarm and the Hourly Time Signal on and off.
• When an alarm is turned on, an alarm tone sounds for
about 10 to 30 seconds when the alarm time is reached.
• When the Hourly Time Signal is turned on, the watch
beeps every hour on the hour.
• You can use any of the preset melodies (M-1, M-2, M-
3) or melodies you arrange with the Mix Mode for the
alarm in place of the standard beep sound. See “USING THE MIX MODE” for details on arranging your own
melodies.
• See the “MELODY LIST” on the next page of this manual for details on the three preset melodies.
• The alarm does not sound if the alarm time is reached
while you are arranging a melody in the Mix Mode.
To set alarms
1.Press
EE
EE
E while in the Alarm Mode to select an alarm
(Alarm 1 through Alarm 5).
Alarm 2
Alarm 1
Alarm 3
Alarm 5
Hourly Time Signal
Alarm 4
2. After you select an alarm, hold down
AA
AA
A. The alarm
sound name flashes on the display because it is
se-
lected
.
• At this time, the alarm is automatically switched on.
3.Press
CC
CC
C to change the selection in the following se-
quence.
Hour
Alarm sound
name
Minutes
4.Press
EE
EE
E to increase the selected digits and
BB
BB
B to decrease them. Holding down
either button changes the selection at high speed.
• The format (12-hour and 24-hour) of the alarm time matches the format you select
for normal timekeeping.
• When setting the alarm time using the 12-hour format, take care to set the time
correctly as morning (A) or afternoon (P).
5.While the alarm sound name is flashing, press
EE
EE
E or
BB
BB
B to scroll through the avail-
able alarm sounds to find the one you want.
M-2
M-1
M-3
001
BEEP
002003
• Melody numbers, 001 through 003 can be replaced by user melody names. If you
have not created your own melodies or if you did not assign names to melodies
you created, melodies are identified by their numbers 001 through 003.
6.After you finish inputting data, press
AA
AA
A to return to the Alarm Mode.
• If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the Alarm Mode automatically.
To stop the alarm
Press any button to stop an alarm when it starts to sound.
To switch an Alarm on and off
1.In the Alarm Mode, press
EE
EE
E to select an alarm.
2.When the alarm you want is selected, press
BB
BB
B to switch
it on and off.
......... Individual alarm indicator
Indicates whether the alarm whose number
is currently selected in the Alarm Mode is
on.
ALM ....... General alarm indicator
This indicator is shown on the display in all
modes while any alarm is on.
Title
Melody number
Current time
Alarm sound name
Individual alarm on indicator
General alarm on indicator
Alarm time
Alarm number
Individual alarm on indicator
General alarm on indicator
Alarm time
Alarm number
Current time
Mode indicator
Individual alarm on indicator
General alarm on indicator
Alarm time
Alarm number
1856/1933/2065-2
Elapsed time measurement
Start
Stop Re-start Stop Clear
Start
Split Split release Stop Clear
Start
Split Stop Split release Clear
Split time measurement
Split time and 1st-2nd place times
First runner
finishes.
Second runner
finishes.
Record time of
first runner.
Record time of
second runner.
To turn Hourly Time Signal on and off
1.In the Alarm Mode, press
EE
EE
E to select the Hourly Time
Signal.
2. When the Hourly Time Signal is selected, press
BB
BB
B to
toggle it on (ON appears in lower part of the display)
and off (OFF displayed).
......... Hourly Time Signal Indicator 1
This indicator is shown in the Alarm Mode
only to indicate that the Hourly Time Signal
is on.
SIG ........ Hourly Time Signal Indicator 2
This indicator is shown on the display in all
modes while the Hourly Time Signal is on.
To test the alarm
Press
DD
DD
D while in the Alarm Mode to sound the alarm. Press any button to stop the
alarm.
STOPWATCH MODE
The Stopwatch Mode lets you measure elapsed time, split
times, and two finishes. The range of the stopwatch is 23
hours, 59 minutes, 59.99 seconds. You can use the EL
backlight by pressing
BB
BB
B at any time while the stopwatch
is operating.
Hourly time signal
on indicator 2
Hourly time signal
on indicator 1
Current time
Hourly time signal
on/off display
Mode indicator
Hours
Minutes
Seconds
1/100 Second
M-1 HIGH ENERGY PROTONS
M-2 FEEL THE UNIVERSE
M-3 FREAK
All of these are CASIO original melodies.
MELODY LIST
M-1 New year’s day
M-2 Orinoco flow
M-3 Runaway
T-9890248
1856
1933
M-1 Lovin’ you
M-2 In The Summertime
M-3 Baby, I love Your Way
T-9910248
2065
Loading...