Carvin 212E User Manual
PRECAUTIONS
1) DO NOT EXCEED THE POWER RATING marked on the rear connect plate.
Excessive power will destroy drivers. 2) DISTORTION from power amps will destroy
drivers much faster than clean power. 3) WATER, MOISTURE, and DUST are
harmful to drivers causing failure which is not covered under warranty.
WARRANTY
CARVIN loudspeakers are covered by a ONE year limited warranty unless
otherwise stated. Warranty coverage is limited to original manufactures defects
only. WARRANTY DOES NOT COVER: 1) Opened or burned voice coils. 2) Torn
cones caused by improper packing or abuse. 3) Damage from rain, moisture, ETC.
When returning defective driver(s), remove them from the enclosure to reduce
shipping costs. DO NOT stuff paper into the driver(s). Return pre-paid by UPS.
Include your address and description of the problem. Your driver(s) will be returned
COD for the cost of shipping and reconditioning if not covered under warranty.
MODEL 112E & 212E SPEAKER SYSTEM SPECS:
Frequency Response: 75 to 7.5k Hz
Drivers: 112E; One VL12 Vintage Series 12“ Speaker
212E; Two VL12 Vintage Series 12“ Speakers
Power Handling: 112E: 100 watts, 212E: 200 watts
Coverage Angles: 90°Horizontal, 45°Vertical
Nominal Impedance: 112E 8Ω, 212E 4Ω
Input Connector: One 1/4" Phone Connector
Woofer Enclosure Type: Open Back
Enclosure Covering: Tweed Vinyl
Dimensions: 112E; 19.5"W x 10.25"D x 17.5"H — 23 lbs.
212E: 26"W x 10.25"D x 17.5"H — 32 lbs.
Warranty: One Year
Optional Cable:
PH8
Optional
Covers: 112E; CVS112E, 212E; CVS212E
CARVIN ENGINEERING DATA
112E & 212E SPEAKER SYSTEMS
INSTRUCTIONS
212E
Carvin’s 112E & 212E extention speaker cabinets are constructed of the finest
materials and are built to the toughest standards in the industry. Moreover, they are
loaded with the best all-around sounding vintage 12” drivers available. These
speakers are capable of crystal clear “Clean” tones and yet can be driven hard to
achieve that familar warm vintage sound, with the perfect amount of midrange and
bass. The enclosure is built from light weight, yet incredibly strong, poplar plywood
and is covered in a vintage vinyl tweed. Steel corners, a top strap handle and
vintage brown grill cloth further protect and enhance your investment.
RECEIVING INSPECTION
INSPECT YOUR SPEAKER FOR ANY DAMAGE which may have occurred during
shipping. If any damage is found, please notify the shipping company & CARVIN.
SAVE THE CARTON & ALL PACKING MATERIALS. In the event you have to re-ship
your unit, always use the original carton and packing material. This will provide the best
possible protection during shipment. CARVIN and the shipping company are not liable
for any damage caused by improper packing.
SAVE YOUR INVOICE. It will be required for warranty service if needed in the future.
SHIPMENT SHORTAGE. If you find items missing, they may have been shipped
separately. Please allow several days for the rest of your order to arrive before inquiring.
RECORD THE SERIAL NUMBER on the enclosed warranty card or below on this
manual for your records. Keep your portion of the card and return the portion with your
name and comments to us.
TYPICAL LOUDSPEAKER IMPEDANCE CONFIGURATIONS
Individual speaker or speaker cabinet wiring examples for total impedance.
For your records, you may wish to record the following information.
Serial No._____________________ Invoice Date_______________
SERIES CONNECTION
16Ω TOTAL IMPEDANCE
+
+
+
PARALLEL CONNECTION
4Ω TOTAL IMPEDANCE
+
+
+
8Ω TOTAL
IMPEDANCE
SERIES/PARALLEL
CONNECTION
8Ω TOTAL IMPEDANCE
+
+ +
+
+
+
+
8Ω
8Ω
8Ω
8Ω
8Ω
8Ω
8Ω
4Ω8Ω
8Ω
16Ω8Ω8Ω
76-1212E 996
12340 World Trade Drive, San Diego, CA 92128
(619) 487-1600 (800) 854-2235
www.carvin.com
Loading...