Carson Manufacturing Co., Inc.
5451 North Rural Street
Indianapolis, IN 46220
Phone: (888) 577-6877 Fax: (317) 254-2667
www.carsonsirens.com
SA-441-17
DUAL REMOTE SIREN AMPLIFIER WITH MECHANICAL TONE
O |
|
O |
|
|
|
F |
|
|
|
|
|
F |
DUAL |
N |
RADIO |
|
|
|
|
|
|||
|
|
|
PA |
||
|
|
|
SIREN |
||
|
|
|
|
||
|
|
|
STBY |
VOL |
|
|
|
|
|
||
|
|
|
MECH |
SA-441 |
|
|
|
|
WAIL |
||
|
|
|
ON |
|
|
|
|
|
YELP |
POWER |
|
|
|
|
|
|
|
|
|
|
PHASER |
|
|
INSTALLATION AND OPERATING
INSTRUCTIONS
Carson is a trademark of Carson Manufacturing Company, Inc.
Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage. Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity. (Ref. OSHA 1910.95 for occupational noise exposure guidelines)
Page 2 of 15 |
SA-441-17 |
Installation and Operating Instructions |
TABLE OF CONTENTS |
||
TABLE OF CONTENTS............................................................................................................. |
|
2 |
SPECIFICATIONS ..................................................................................................................... |
|
3 |
NOTICE ..................................................................................................................................... |
|
3 |
GENERAL DESCRIPTION ........................................................................................................ |
|
4 |
INSTALLATION ......................................................................................................................... |
|
5 |
SAFETY PRECAUTIONS....................................................................................................... |
|
5 |
UNPACKING .......................................................................................................................... |
|
5 |
OPTION SWITCHES.............................................................................................................. |
|
6 |
MOUNTING – Amplifier.......................................................................................................... |
|
7 |
MOUNTING – Control Head................................................................................................... |
|
7 |
ELECTRICAL CONNECTIONS - Amplifier............................................................................. |
|
8 |
ELECTRICAL CONNECTIONS – Control Head..................................................................... |
8 |
|
ELECTRICAL CONNECTIONS CONTINUED........................................................................ |
9 |
|
OPERATION............................................................................................................................ |
|
10 |
GENERAL ............................................................................................................................ |
|
10 |
SELECTOR SWITCH........................................................................................................... |
|
10 |
MICROPHONE (PA Override).............................................................................................. |
|
10 |
PA VOL ................................................................................................................................ |
|
10 |
SIREN SWITCH ................................................................................................................... |
|
11 |
AUXILIARY INPUT............................................................................................................... |
|
11 |
HORN RING CYCLER 2 (HRC2) ........................................................................................ |
|
11 |
RADIO VOLUME ADJUST................................................................................................... |
|
11 |
DUAL SWITCH..................................................................................................................... |
|
11 |
SERVICE ................................................................................................................................. |
|
12 |
PROBLEMS ......................................................................................................................... |
|
12 |
PARTS and ACCESSORIES................................................................................................ |
|
13 |
RETURN .............................................................................................................................. |
|
14 |
LIMITED WARRANTY.......................................................................................................... |
|
14 |
CONTROL HEAD INSTALLATION TEMPLATE ...................................................................... |
15 |
|
CP5008A |
07/29/08 |
SA-441-17 Installation and Operating Instructions Page 3 of 15
|
|
|
SPECIFICATIONS |
|
|
|
Input Voltage |
11 - 16 VDC (negative ground) |
|
|
|
||
Input Current |
17 AMPS (@14 VDC - dual 100W speakers) |
|
|
|||
Standby Current |
|
Less than 250 mA |
|
|
|
|
Audio Frequency |
|
200Hz - 10 kHz + 3db |
|
|
|
|
Audio Distortion |
|
Less than 3% (@1 kHz - dual 100W speaker) |
|
|
||
Audio Output |
|
80 watts (@14 VDC - dual 100W speaker) |
|
|
||
Audio Input |
|
400 ohms + 10% |
|
|
|
|
Output Power |
|
210 WATTS RMS MAX. (15 VDC - dual 100W speakers) |
|
|||
Siren Frequency |
|
700Hz - 1500Hz (Mechanical 700Hz – 1600Hz) |
|
|||
|
|
Two-Tone = 435Hz & 585Hz |
|
|
|
|
Tones / Cycle Rates |
|
Mech |
Wail |
Yelp |
Phaser |
Two-Tone |
|
|
6 CPM |
13 CPM |
190 CPM |
15 CPS |
60 CPM |
High Voltage |
|
16 - 18 VDC will cause siren output to cease, resume at normal |
||||
Protection |
|
|
|
|
|
|
Short Circuit Current 50 AMPS (supply circuit must be capable of supplying this)
Operating |
-15° F to +140°F |
Temperature |
6-position rotary selector switch (Radio, Standby. Mechanical, Wail, |
Controls |
|
|
Yelp, and Phaser). |
|
Dual siren control toggle switch. |
|
Momentary push-button Siren switch. |
|
Front panel mounted PA volume control, Radio adjust on amplifier |
|
Auxiliary input for positive or negative connection. |
|
8-position DIP switch option selector. |
Connections |
(2) Positive, (2) Negative, (3) Speaker, (2) Radio, Control |
(10-Pin Conn) |
Control Head: 6-1/4" W x 2-7/8" H x 1" D |
Size |
|
|
Amplifier: 8” L x 6-3/4” W x 2-1/8” H |
Weight |
6 LBS. |
NOTICE
Due to continuous product improvements, we must reserve the right to change any specifications and information, contained in this manual at any time without notice.
Carson Manufacturing Co., Inc. makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
Carson Manufacturing Co., Inc. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this manual.
See www.carsonsirens.com for latest information.
07/29/08 |
CP5008A |
Page 4 of 15 |
SA-441-17 Installation and Operating Instructions |
GENERAL DESCRIPTION
The SA-441 Dual Siren Amplifier with Mechanical Tone is a premium unit designed for dual 100W speaker use. The control head is only 1 inch deep and can be installed in minimum clearance areas. Connection between the control head and amplifier is via a single lead wire with common ground.
A 6-position rotary selector switch controls the primary operating modes of Radio, Standby, Mechanical, Wail, Yelp, and Phaser. A Dual siren control switch provides additional modes, including dual Mechanical, Wail and Yelp, Yelp and Mechanical, and Phaser and Mechanical. Two-Tone may optionally replace Phaser. A Siren push-button switch is provided for Manual control of the output tone or Horn override, depending on the selector switch and option switch settings. An independent toggle switch controls power. A hole is provided in the amplifier to adjust Radio volume.
Depending upon the version, the microphone may or may not be directly mounted to the control head. Units with an “F” suffix have the microphone permanently mounted to the faceplate. Units with an “FX” suffix are provided with an extension harness and connectors for remote mounting of the microphone.
An auxiliary input is provided for connection to a positive or negative horn ring circuit or switch, performing the same function as the Siren push-button.
An 8-position DIP switch on the amplifier allows selection of various options: Two-Tone to replace Phaser, Manual Mechanical, Manual Wail, and Horn Ring Cycler 2 (HRC2), which allows cycling through Mechanical, Wail, Yelp, and Phaser by tapping the horn ring when the function switch is in the Standby position. The front panel is backlighted with LED's for night visibility.
This durable unit utilizes short circuit, high voltage, and reverse polarity protection systems for maximum service life over a wide temperature range. Two separately fused amplifiers provide redundancy, and the unit will operate with only one amplifier functioning.
CP5008A |
07/29/08 |
SA-441-17 Installation and Operating Instructions |
Page 5 of 15 |
INSTALLATION
Proper installation of the unit is essential for years of safe, reliable operation. Please read all instruction before installing the unit. Failure to follow these instructions can cause serious damage to the unit or vehicle and may void warranties.
SAFETY PRECAUTIONS
For the safety of the installer, vehicle operator, passengers and the community please observe the following safety precautions. Failure to follow all safety precautions and instructions may result in property damage, injury or death.
Qualifications - The installer must have a firm knowledge of basic electricity, vehicle electrical systems and emergency equipment.
Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage. Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity. (Ref. OSHA 1910.95 for occupational noise exposure guidelines)
Mounting - Mount the control head for easy access by the vehicle operator. DO NOT mount in air bag deployment area. Assure clearances before drilling in vehicle.
Wiring - Use wiring capable of handling the current required. Make sure all connections are tight. Route wiring to prevent wear, overheating and interference with air bag deployment.
Install and check all wiring before connection to vehicle battery.
Testing - Test all siren functions after installation to assure proper operation. Test vehicle operation to assure no damage to vehicle.
Keep These Instructions - Keep these instructions in the vehicle or other safe place for future reference. Advise the vehicle operator of the location.
UNPACKING
Inspect contents for shipping damage. If found alert carrier immediately.
Contact supplier immediately if any components are missing. Contents should include the following items:
Complete Unit
Qty |
Item |
|
|
|
-17F |
-17FX |
1 |
Amplifier, Remote (SA-441-17F or FX) |
|
|
X |
X |
|
1 |
Bracket, Microphone Clip with mounting screws (CP3633) |
X |
X |
|||
1 |
Connector, 10-P Terminal Block Plug for Amplifier |
(CP4833-10) |
X |
X |
||
1 |
Cable Assembly for Control Head, 5-P |
(CP3040) |
|
X |
X |
|
1 |
Control Head with attached Microphone |
(SA-441-17CH) |
X |
|
||
1 |
Control Head without Microphone |
(SA-441-17CHX) |
|
X |
||
1 |
Cable, Microphone Extension 18FT |
(CP3850) |
|
|
X |
|
1 |
Microphone, Detachable Noise Cancelling (ES00028-10) |
|
X |
|||
1 |
Instruction Manual (CP5008 This Manual) |
|
X |
X |
||
|
Amplifier Only |
|
|
|
||
Qty |
Item |
|
|
|
|
|
1 |
Amplifier, Remote Only (SA-441-17AMP) |
|
|
|
||
1 |
Connector, 10-P Terminal Block Plug for Amplifier |
(CP4833-10) |
|
|
||
1 |
Instruction Manual (CP5008 This Manual) |
|
|
|
||
07/29/08 |
|
|
|
CP5008A |
||
Loading...