Carrier 38-40GVM Owner's Manual
40GVM / 38GVM
Multi---Split High---W all Ductless Split System
38GVM Sizes 018k, 24K, 30K, 36K, and 42K
40GVM Sizes 9k, 12k, and18k
Owner’s Manual
TABLE OF CONTENTS
PAGE
SAFETY PRECAUTIONS 2.....................................................................................
GENERAL 2.................................................................................................
INDOOR UNIT PART IDENTIFICATION 3........................................................................
REMOTE CONTROL PART IDENTIFICATION 4...................................................................
DISPLAY PANELS 5..........................................................................................
REMOTE CONTROL 6........................................................................................
REMOTE CONTROL FUNCTIONS 7--10..........................................................................
CLEANING, MAINTENANCE AND TROUBLESHOOTING 11--12....................................................
NOTE TO EQUIPMENT OWNER:
Please read this Owner’s Information Manual carefully before installing and using this appliance
and keep this manual for future reference.
For your convenience, please record the model and serial numbers of your new equipment in the
spaces provided. This information, along with the installation data and dealer contact information,
will be helpful should your system require maintenance or service.
UNIT INFORMATION
Model # ___________________________________
Serial # ___________________________________
INSTALLATION INFORMATION
Date Installed _____________________________
DEALERSHIP CONTACT INFORMATION
Company Name: _________________________________
Address:_________________________________________
________________________________________________
Phone Number:__________________________________
Technician Name:_________________________________
________________________________________________
SAFETY PRECAUTIONS
!
WARNING
PERSONAL INJURY, DEATH, OR PROPERTY
DAMAGE HAZARD
Failure to follow this warning could result in personal injury,
death, or property damage.
Read and follow all instructions and warnings, including
labels shipped with or attached to unit before operating your
new air conditioner.
Any time you see this symbol in manuals, instructions and on
the unit, be aware of the potential for personal injury. There are
three levels of precaution:
DANGER identifies the most serious hazards which will result in
severe personal injury or death.
WARNING signifies hazards that could result in personal injury or
death.
CAUTION is used to identify unsafe practices which would result
in minor personal injury or product and property damage.
NOTE is used to highlight suggestions which will result in
enhanced installation, reliability, or operation.
!
PERSONAL INJURY, DEATH AND / OR PROPERTY
Failure tofollow this warning could result in personal injury,
death or property damage.
Improper installation, adjustment, alteration, service,
maintenance,oruse cancauseexplosion,fire, electricalshock,
or other conditions which may cause personal injury or
property damage.
Consult a qualified installer, service agency, your distributor
orbranchforinformationorassistance. Thequalifiedinstaller
or service agency must use factory--authorized kits or
accessories when modifying this product.
WARNING
DAMAGE HAZARD
GENERAL
The high wall fan coil unit provides quiet, maximum comfort. In
addition to cooling and/or heating, the high wall fan coil unit
matched with an outdoor condensing unit will filter and
dehumidify the air in the room to provide maximum comfort.
IMPORTANT: The high wall fan coil unit should be installed by
authorized personnel only; using approved tubing and accessories.
If technical assistance, service or repair is needed, contact the
installer or call 1--800--227--7437.
The high wall fan coil unit can be set up and operated from the
remote control (provided). If the remote is misplaced, the system
can be operated from the “Auto” setting on the unit.
Operating Modes:
The high wall fan coil unit has five operating modes.
S Fan only
S Auto (heat pump models only)
S Heating (heat pump models only)
S Cooling
S Dehumidification (DRY)
Fan Only
In FAN ONLY mode, the system filters and circulates room air
without changing room air temperature.
Auto
In AUTO mode, the system will automatically cool or heat the
room according to factory setting. In AUTO mode, the setpoint
temperature is not adjustable.
Heating
In Heating mode, the system heats and filters room air.
Cooling
In Cooling mode, the system cools, dries and filters room air.
Dehumidification (DRY)
In Dehumidification mode, the system dries, filters and slightly
cools room air temperature. Use of this mode does not take the
place of a dehumidifier.
Remote Control
The remote control transmits commands to set up and operate the
system. The control has a window display panel that shows the
current system status. The control can be secured to a surface
when used with the mounting bracket provided.
2
INDOOR UNIT PART IDENTIFICATION
3
2
4
5
6
Display Closeup
HEAT
COOL
TEMPERATURE
RUN
SIGNAL
RECEIVING
DEHUMIDIFY
WINDOW
Remote control holder
1
8
7
Front Panel Frame
1
2
Display Panel (shown for 40GXM units)*
Front Panel
3
Air Filter
4
Horizontal Airflow Louver
5
Manual Adjustable Vertical Airflow Louver
6
7
Remote Control
8
Room Temperature Sensor
Inter-Connecting Tubing
9
10
Control and Power Wiring to Indoor Unit
Service Valves
11
Drain Hose
9
Air intake
Air outlet
10
11
A12590
Indoor/Outdoor Unit
3
REMOTE CONTROL PART IDENTIFICATION
1. Remote Control Display
2. ON/OFF Button
1
3. MODE Button
4. Setpoint Clock, Timer Up (+) and Down ( -- -) Buttons
5. Fan Speed
6. Horizontal Louver Swing Button
7. Clock Button
23
4
5
7
9
10
12
8. Timer ON Button
9. Dry Coil Button
10. Temperature Button
11. Timer OFF Button
6
12. Turbo Mode Button
8
13. Sleep Mode button
14. Light Button to Turn ON or OFF Display on Front Panel
11
14
13
A12434
Remote Control 09k -- 18k
4
Loading...